Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Basic Melodeon Operation  (Read 1686 times)

0 Members and 1 Guest are viewing this topic.

dmk

  • Member
  • *
  • Offline Offline
  • Posts: 4
Basic Melodeon Operation
« on: March 30, 2014, 03:10:53 AM »

Hello All,

Firstly, I have really enjoyed the information I have received from this board.  I was given a one row C melodeon (a no name) which is at least 60 years old, stamped Made in Germany.  In my enthusiasm I decided to restore it - it made terrible squeaking noises and some of the treble keys did not work at all. Most of the leather reed valves were curled and there was reed plate corrosion and breaks in the wax.  Charlie at CGM got me all the parts I needed and was very patient with me.

After it is all back together I will get down to the business of learning to play.  I have pinged all the reeds and according to my chromatic tuner most sound pretty good (at least match to the treble/bass reference chart)

This is my question.  In my enthusiasm (I should have taken photo's straight off) I may have mixed up the reed plate up/down orientation.

Does working the bellows in - corresponds to the plate side that is down (as in the side less accessible after being waxed in)?

I know I should be able to think this one out.... but this is making my head hurt. 

Denise



Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Basic Melodeon Operation
« Reply #1 on: March 30, 2014, 03:37:08 AM »

Does working the bellows in - corresponds to the plate side that is down (as in the side less accessible after being waxed in)?

Hi Denise,

No, the other way around...

The reeds that are exposed, facing you, are the press ones

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Basic Melodeon Operation
« Reply #2 on: March 30, 2014, 04:04:41 AM »

 :o

And remember if you are working with the reedblocks on the outside of a tuning bellows then the bellows direction is the opposite what it would be if the reeds were on the inside of the bellows.

dmk

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: Basic Melodeon Operation
« Reply #3 on: March 30, 2014, 04:33:45 AM »

Does working the bellows in - corresponds to the plate side that is down (as in the side less accessible after being waxed in)?

Hi Denise,

No, the other way around...

The reeds that are exposed, facing you, are the press ones

Thanks Stephan.... for a non-player this is still confusing.  I have hopes I will learn.
Logged

dmk

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: Basic Melodeon Operation
« Reply #4 on: March 30, 2014, 04:36:04 AM »

:o

And remember if you are working with the reedblocks on the outside of a tuning bellows then the bellows direction is the opposite what it would be if the reeds were on the inside of the bellows.

Thanks Christopher,  I don't have that luxury I am afraid.  I will have to wing it and hope it doesn't sound too bad.  If it needs a tweak I will steal myself and see if I can do it without taking out the reed plates.  If it sounds funky well what the heck....

Denise
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Basic Melodeon Operation
« Reply #5 on: March 30, 2014, 10:20:47 AM »

I have pinged all the reeds and according to my chromatic tuner most sound pretty good (at least match to the treble/bass reference chart)


Pinging the reed will only give you a very rough idea of the note that the reed will make when air is drawn over it inside the instrument.  For tuning purposes you should never use the sound of a ping - always the note produced by airflow and it's only truly accurate when it's inside the melodeon waxed down on the reed block.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Basic Melodeon Operation
« Reply #6 on: March 30, 2014, 11:22:18 AM »

If there are separate reed plates with just a pair on each plate then there is usually a marking to show which side is uppermost, the marks can vary between makes, but could be a letter or number, a diagonal line across the corner, but whatever it is normally it will only be on one side.  If it has long plates with reeds for all ten notes on one plate then you don't usually find these marks, but often you can identify the underside from the traces of contact with the reed chamber dividing walls. If you can hear the difference between the push and pull reeds for the same button then for the low notes the lowest of the two is always the push reed which is uppermost.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dmk

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: Basic Melodeon Operation
« Reply #7 on: March 30, 2014, 03:24:01 PM »

Thank you for all the responses.  Yes I understand that the best indication of the tuning will be when the plates are waxed down.  I actually placed my chromatic tuner right on the reed plate it  (it is a vibration tuner) and did the ping. There are 2 solid treble reed plates so this helped me match the notes to the chart I had, and that helped me identify the type of melodeon I had.

I was using the bracing pin marks, but was afraid I mixed them up after I cleaned the plates, as I tipped them out once when they were cleaned but no longer waxed in.  Just don't want to have to go through the waxing process more than once.....

Denise


Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal