Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Standing in for a band and amplification  (Read 7673 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Standing in for a band and amplification
« Reply #20 on: April 24, 2014, 05:44:08 PM »

  It's not just about thanking him after the gig, it's about thinking and discussing through in advance what he will need, if you as a performer are going to sound at your best.

The root cause of the problem for many sound engineers is that many musicians don't seem to consider the overall environment they are going to be in, when they are preparing for a gig.  Over several years I have provided the sound for an open mic stage at a festival, and at each one I have had to give out several batteries to guitarists who hadn't even bothered to check that their onboard preamps were still working - despite me having politely asked them all to check in advance!  And to anyone who is unsure, I'd say, just talk to the sound engineer, they will probably be immensely pleased that someone's even considered they are there!

Absolutely right, Chris; we're obviously going to agree to differ on a small point or two, but it seems we're very largely in agreement. Like you, I imagine, I've been in all three positions (oo-er missis!) - namely, musician in a band with a soundman out front, musician in a band where either I or in some cases another band member has been mixing onstage, and soundman for a dance/ceilidh/concert where I knew/didn't know the act(s), who might or might not turn up with compatible gear, and the situation looks very different from each of those standpoints. Bottom line - talk to each other, preferably in advance, and remember you're all on the same side.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lizzy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 654
Re: Standing in for a band and amplification
« Reply #21 on: April 24, 2014, 09:36:50 PM »

Chris, you are correct regarding the loud sound the band have, and it is such fun to play with them.......a line up of bass guitar, alto sax, drums, flute and melodeon......equally you are right about feedback....there was a problem with feedback which they say they normally do not have.  I think that the next gig I have agreed to do will be my last, as although it is fun and I feel I do a good job the angst is just a little too much.
Logged
Hoppicking in Herefordshire

Castagnari Tommy, , Giordy.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #22 on: April 24, 2014, 10:26:00 PM »

Crikey, don't give up - this can be put right, I'm sure!  I don't know if you followed a thread some months ago about the problems with miking up boxes, but it might be worth checking it out and discussing with your band's sound guy.  We have all suffered these problems at some stage, (as will your flautist, I bet!), and the sound guy will appreciate you trying to sort it.

If the worst comes to the worst, sit right back from the monitors, towards the rear of the stage, with the microphone(s) (hopefully directional ones) near the box, pointing away from the monitors.  That will probably cure the feedback.  If you then can't hear yourself, you could perhaps consider trying a single earphone as your monitor instead of the speaker, if the sound system allows it, as a relatively cheap and cheerful fix.

In the longer term, investing in highly directional free-standing mikes is to my mind the best fix, but many others disagree - they prefer small close miking systems.  Both of these are going to set you back a hundred quid or two, but hey, that's much less than the cost of the box, is it not?
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Standing in for a band and amplification
« Reply #23 on: April 24, 2014, 11:01:07 PM »

Feedback could be the fault of the sound man, the room or the equipment, but never the melodeonist.
steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Standing in for a band and amplification
« Reply #24 on: April 25, 2014, 07:19:26 AM »

If you then can't hear yourself, you could perhaps consider trying a single earphone as your monitor instead of the speaker, if the sound system allows it, as a relatively cheap and cheerful fix.
If you do choose to use a single in-ear monitor, please be very careful with its volume. Given that your 'open' ear will be picking up band sound and audience noise, the temptation will be, in order to hear your own instrument over the top of all this, to increase the earphone level to a point that risks hearing damage.
Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Standing in for a band and amplification
« Reply #25 on: April 25, 2014, 07:28:35 AM »

Feedback could be the fault of the sound man, the room or the equipment, but never the melodeonist.
steve
Steve, I'm assuming that you're being ironic (and I don't use emoticons either) but in case it's not intended or read like that, the melodeonist certainly can be to blame. The muso who insists on putting down his/ her mic-equipped box on the stage in front of the monitors, waves the box round in front of the monitors, or recklessly turns up the volume on a powered monitor are all likely to trigger feedback.
Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Standing in for a band and amplification
« Reply #26 on: April 25, 2014, 07:58:48 AM »

Of course you're right, but I wasn't envisaging clipped mics (loaned or pa mics are most likely to be on stands?) and I'd expect a sound man to do a little coaching if someone appeared inexperienced with the sound equipment.
Actually I'd be inclined to turn clipped mics down when the instrument was being removed, but I don't suppose all sound men are watching full time.
So no I wasn't being ironic, but I accept the player can make mistakes.
Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #27 on: April 25, 2014, 09:27:22 AM »

Yes, if the sound man is being paid to do the job professionally he will obviously have some responsibility and probably lots of equipment, but if the band provides its own sound man, as I think is the case here, I do still think that it's really for the musician to provide their own specialised system for their instrument, to experiment in advance and to know what works on stage.  You can't expect the guy providing the PA to come ready with specialised stuff for every instrument he's likely to encounter, that really has to be for the musician to research and to fund.  And boxes are definitely tricky to mike up successfully.

I find that the instrument system is invariably the weak link in an on-stage amplification system.  I am sure that all sound guys will have countless tales of musicians turning up with hopelessly inadequate equipment, or with stuff they've never tried out, old batteries and no spares, broken cables, dodgy jack sockets, mis-matched stage boxes, etc.  I understand that many musicians will not know the ins and outs of the technology, but if so they need to ask someone in advance.  Those musicians will probably have spent several thousand pounds on their instruments, so why not spend the extra hundred or two so that they can be heard properly wherever they play?  And I have also noticed that fame is no guarantee of competence, dare I say it!  Some musicians do spend a lot of money on multiple stage effects boxes and so on, but don't really understand (or have never tried out) their capabilities and thresholds, and turn them up way past their limits, and give the desk a signal that is already distorted.  At that point, unless the sound man can intervene personally with the musician, he has no option but to turn the musician well down in the mix, to save the ears of the audience.

With a box, avoiding feedback from the mikes is a perennial problem.  Because of the many separated and moving sound sources, you really need more than one mike, and they need to be able to cover all the reeds reasonably evenly.  This together means that unless the microphones are particularly directional over the whole frequency range, and thoughtfully-arranged, you are likely to pick up too much sound from unwanted sources, such as the monitor in front of you.  Bingo, feedback!

In a concert setting, this will probably never be a problem.  But if you're playing in a loud dance band, with loads of background noise from the audience, in a hall with awful acoustics, it can become impossible to hear yourself without going to feedback levels.  You are then faced with the horrible decision of whether to try to continue playing deaf, or not at all.  Avoid this nightmare at all costs, (and please don't shout at the sound man when it happens!)  He may be able to do a sticking plaster fix by cutting out resonant frequencies, but this problem is, I regret to say, actually the responsibility of the musician to sort out in advance.
Logged

Lizzy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 654
Re: Standing in for a band and amplification
« Reply #28 on: April 25, 2014, 10:30:14 AM »

Hmm a lot to think about, but in a good way.

I was provided with two mics, one each side of the box,(don't know what sort) positioned very close to me on stands. When I wasn't playing I sat back in my chair away from them and moved close to them to play. I sat very very still, and did what I was told.......Yes the flautist had problems with feed back with her own special equipment. It did resolve with the sound engineer working magic, he plays in the band sometimes so probably difficult to do both jobs. Quite right in saying that as the evening noise increased from the dancers it was more difficult to hear through the monitors, so towards the end playing deaf.....so to speak.

I won't give up.... (:) it is too much fun.

Again thanks for all the advice, I have found it very helpful and interesting.
Logged
Hoppicking in Herefordshire

Castagnari Tommy, , Giordy.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #29 on: April 25, 2014, 11:46:29 AM »

Quote
I won't give up.... (:) it is too much fun.

Thank goodness for that!

I would ask the sound guy what mikes he used, and put these issues to him to ask his opinion on what the problem was.  The sheer number of mikes can be a problem sometimes in a noisy environment, it may have been that, but I'm suspecting that your mikes weren't directional enough for the purpose you needed them for, and I would offer to provide suitable replacements, if I were in your shoes.  Personally I have a problem with close miking systems, in that (although they are what it says on the tin) typically the small individual mikes are not good at suppressing unwanted sound from the rear. But as I say, others disagree with me here - Andrew Wigglesworth has a lot of relevant knowledge about all this.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #30 on: April 25, 2014, 11:59:19 AM »

Just to add, I'm interested to know more about the band - were you playing a D/G box, or maybe C/F?  Sax players have trouble in dance bands because when transposed, to them it's all in difficult sharp keys (D and G being usually B and E to them), hence you often find them playing a few long notes rather than the melody.  Flute players however are pretty versatile with regards to keys - their problems however are intonation, feedback, and trying not to move around away from the mike (which makes swan-neck mike systems potentially beneficial for them).  However, because the sound source is so close to their ears, if they want to hear themselves through a monitor it's difficult to avoid feedback.

And drums more than double the difficulties in hearing what you're playing!
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Standing in for a band and amplification
« Reply #31 on: April 25, 2014, 12:17:29 PM »

Personally I have a problem with close miking systems, in that (although they are what it says on the tin) typically the small individual mikes are not good at suppressing unwanted sound from the rear. But as I say, others disagree with me here - Andrew Wigglesworth has a lot of relevant knowledge about all this.

Ian Dedic (in a similar thread elsewhere on Melnet) has been recommending a hypercardioid clip on mic. I don't remember what it was, but a Google search suggests it was likely to be a Beyerdynamic TG-152D as that's just about the only clip-on hypercardioid available. The logic is that the hypercardiod has rejection over a wider angle behind the mic, even though it doesn't have a null exactly at the back (the null is 120 degrees off axis instead of 180) so if you are moving around and/or there are monitors everywhere, they're a safer bet.

Flute players ... problems however are intonation, feedback, and trying not to move around away from the mike (which makes swan-neck mike systems potentially beneficial for them).  However, because the sound source is so close to their ears, if they want to hear themselves through a monitor it's difficult to avoid feedback.

And drums more than double the difficulties in hearing what you're playing!

Our recorder and flute player was finally able to her her own instrument when we abandoned floor wedges and put a small monitor speaker (JBL control 1) on a mic stand right next to her at head level. It doesn't have to be loud and the sound is really clean that close up. She uses a Microvox swan neck mic. There's a small area right in front of the speaker that must be avoided with the instrument/mic, otherwise it's perfectly safe.

And I'm glad we don't have drums. Basically feedback is not a problem for us as monitor levels really don't have to be high at all.
When I did play in a ceilidh band with a drum kit, I used a stage amplifier, sometimes shared with a fiddle, which worked OK.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #32 on: April 25, 2014, 12:34:28 PM »

Wise advice, Anahata.

Just commenting on a hypercardioid clip-on, I have never used one, but isn't the potential problem that any player is likely to move the box around a bit from time to time, (maybe just putting it down to change boxes) whereas with a standalone system, the microphones don't move?  OK if you're fully aware of the limitations on your movement, but that's quite restrictive in practice.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #33 on: April 25, 2014, 01:04:03 PM »

And indeed their claims look very good, and relevant, but having just looked at the (unstated frequency) polar diagram for the TG-152D in Beyerdynamic's manual, are you sure it's really all that great?
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Standing in for a band and amplification
« Reply #34 on: April 25, 2014, 01:34:57 PM »

Wise advice, Anahata.

Just commenting on a hypercardioid clip-on, I have never used one, but isn't the potential problem that any player is likely to move the box around a bit from time to time, (maybe just putting it down to change boxes) whereas with a standalone system, the microphones don't move?  OK if you're fully aware of the limitations on your movement, but that's quite restrictive in practice.
The clip-on I use for the bass end was a cardioid (Beyer Opus 82), usually a hypercardioid has too narrow a pattern when it's close to the source -- anyway if it's only six inches away the instrument sound is a lot louder than background noise, I've never had any problems with feedback. But don't use an omni pattern mic, and also don't put the box down on the floor in front of a monitor...

I recommended a hypercardioid pattern for a stand-mounted mic for the treble end, it's much easier to get a pattern null close to a monitor than a cardioid, there's less rear pickup generally, and positioned a foot or so away from the box I've also never had any feedback problems -- even playing with the Committee Band with Rob Gifford on drums immediately to my left, when I needed quite loud foldback :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Standing in for a band and amplification
« Reply #35 on: April 25, 2014, 01:52:11 PM »

Sorry Ian , I remember your mentioning hypercardioids and got the wrong end of the stick.

Also agreed that if you have some control over mic and monitor positions, you can get very good feedback rejection by pointing the rear end of a cardioid exactly at the monitor, but nobody had better move it!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #36 on: April 25, 2014, 02:08:00 PM »

For tiny's benefit, would one of you like to recommend exactly what close-miking system she should get to overcome her problems? 

(My system is a couple of Samson Q1's on short mike stands, angled roughly XY towards each end of the box and about 15-20cm away, and I would readily recommend it if it weren't for the fact that they are no longer available.)
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Standing in for a band and amplification
« Reply #37 on: April 25, 2014, 02:09:57 PM »

RE hypercardiod......
I went to a lecture recently given by someone from DPA microphones.  They make excellent mics (arguably the very best of any modern mics) that are used a lot for theatre and film applications (small, high quality, easy to hide etc.). He argues the case for using omni over more directional mics for live applications (even where feedback may be a possible issue). He said the vast majority of their theatre mic sales were omnis.
For anyone who may be interested, I think the paper is this one http://www.dpamicrophones.com/en/Mic-University/Technology-Guide/Directional%20vs%20Omnidirectional%20Microphones.aspx.
Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Standing in for a band and amplification
« Reply #38 on: April 25, 2014, 02:11:54 PM »

btw that was'nt a recommendation that Tiny should get DPA omnis, but if she did, I'd expect them to perform very well.
Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Standing in for a band and amplification
« Reply #39 on: April 25, 2014, 03:03:53 PM »

I have to say the article seems to be talking about using these mikes in a recording (or at least low monitor level) situation, rather than a loud live stage situation, and whilst I am sure that the quality and overall response of such mikes is great, they would be hopeless for our needs here.  Just look at the polar diagrams!  The author seems to be suggesting that off-axis response isn't really a problem, if it's well-balanced, frequency-wise. 

But for us, I am afraid that that is exactly the problem!
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal