Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Hohner 2 row C/F melodion  (Read 5911 times)

0 Members and 1 Guest are viewing this topic.

nathen

  • nathen
  • Member
  • *
  • Offline Offline
  • Posts: 39
  • Vancouver, Canada.
Re: Hohner 2 row C/F melodion
« Reply #20 on: May 26, 2014, 05:29:40 PM »

I'm going to put new valve leathers on my Hohner pokerwork. Since I live in Canada I was wondering if anyone here in Canada or the US could recomend where to buy them.

Thanks

nathen
Logged
Life is not as serious as my mind makes it out to be!

nathen

  • nathen
  • Member
  • *
  • Offline Offline
  • Posts: 39
  • Vancouver, Canada.
Re: Hohner 2 row C/F melodion
« Reply #21 on: May 26, 2014, 05:45:16 PM »

Oh yes, and reed wax as well. I'm going to rewax all the reeds.

Thanks

nathen
Logged
Life is not as serious as my mind makes it out to be!

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner 2 row C/F melodion
« Reply #22 on: May 26, 2014, 07:19:40 PM »

Yesterday I was working on the bass reeds, getting some freed up, when I noticed that they had a T Stamped on them, whereas the treble reeds had an H on them. What does that mean?

It suggests to me that your pokerwork is almost certainly post-war (because that'd be typical) and I can state, for a fact, that Hohner were listing the 2815 1/2 (which is the model you've got) as "frames and panels in highly polished natural oak finish ... decorated in graceful floral design" in both their 1952 and '53 Canadian price lists (because I've got them!), but in 1955 (which happens to be the next one I've got) it's described as "Frames and panels are in black and gold finish."

For me the real tell-tale whether a pokerwork is pre- or post-war is if it has these combined feet/swivelling catches for holding the bass end-board on;



or seperate feet with just screws & washers doing the job, the same as the present production.

There was some useful discussion of the subject in the appropriately-named Pokerwork History thread.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner 2 row C/F melodion
« Reply #23 on: May 26, 2014, 08:24:13 PM »

I'm going to put new valve leathers on my Hohner pokerwork. Since I live in Canada I was wondering if anyone here in Canada or the US could recomend where to buy them.

Thanks

nathen
Charlie Marshall in Scotland is a great supplier. Very reliable and trusted. He ships overseas, no problem.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Hohner 2 row C/F melodion
« Reply #24 on: May 26, 2014, 09:19:04 PM »

I'm going to put new valve leathers on my Hohner pokerwork. Since I live in Canada I was wondering if anyone here in Canada or the US could recomend where to buy them.

Thanks

nathen

Ive ordered from from HMT and Hohner, and a guy local to me so I just pick up at his shop. Call HMT if you have any questions about whats offered on their catalog page. I've never ordered from Charlie but have emailed a few times and he's about as solid as a guy can get.

nathen

  • nathen
  • Member
  • *
  • Offline Offline
  • Posts: 39
  • Vancouver, Canada.
Re: Hohner 2 row C/F melodion
« Reply #25 on: May 27, 2014, 01:26:11 AM »

Thanks for the info guys, that pokerwork thread is really interesting. Yes my box does have the combined feet/swivelling catch. The design is also raised in relief. Do these details make it pre/war?

I'd like to get new bass buttons, one of them is half broken with only a half left. Plus, this button is sitting up too high and the edge catches on the cover when depressed. I looked at the rod connecting it thinking it could be bent, but it didn't look like it. How would I go about lowering it, and is it actually possible to get buttons that would fit this box?

I only have a couple of notes that need some tweaking now so I'm actually able to get tunes out of it. I just love that Hohner sound.

Thanks

nathen
Logged
Life is not as serious as my mind makes it out to be!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 2 row C/F melodion
« Reply #26 on: May 27, 2014, 08:19:49 AM »

Modern Hohner bass buttons will fit but will look very different - bright white.  The only way to adjust the button height is to bend the mechanism.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Hohner 2 row C/F melodion
« Reply #27 on: May 27, 2014, 08:41:28 AM »



I'd like to get new bass buttons, one of them is half broken with only a half left. Plus, this button is sitting up too high and the edge catches on the cover when depressed. I looked at the rod connecting it thinking it could be bent, but it didn't look like it. How would I go about lowering it, and is it actually possible to get buttons that would fit this box?

I only have a couple of notes that need some tweaking now so I'm actually able to get tunes out of it. I just love that Hohner sound.

Thanks

nathen
         
the pallets that seal the bass holes are faced with felt and a thin leather. over time the felt may  compress ,becoming thinner and more solid. this gives rise to the familiar "clack" when it is played.it also causes the bass buttons to stand higher than normal. to fix the buttons try replacing the felt first,before tweeking the rod mechinism.    best of luck with your new hobby( obsession)  , join the club,,    brian.
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner 2 row C/F melodion
« Reply #28 on: May 27, 2014, 10:04:01 AM »



I'd like to get new bass buttons, one of them is half broken with only a half left. Plus, this button is sitting up too high and the edge catches on the cover when depressed. I looked at the rod connecting it thinking it could be bent, but it didn't look like it. How would I go about lowering it, and is it actually possible to get buttons that would fit this box?

I only have a couple of notes that need some tweaking now so I'm actually able to get tunes out of it. I just love that Hohner sound.

Thanks

nathen
         
the pallets that seal the bass holes are faced with felt and a thin leather. over time the felt may  compress ,becoming thinner and more solid. this gives rise to the familiar "clack" when it is played.it also causes the bass buttons to stand higher than normal. to fix the buttons try replacing the felt first,before tweeking the rod mechinism.    best of luck with your new hobby( obsession)  , join the club,,    brian.
If it is the original Hohner pallet facing, it will almost certainly be a thin leather with no felt backing. Guaranteed to produce a noisy action. 

It's true that the pallet facing thickness will partly govern the button height, but generally speaking, if a single button appears to be at an anomalous height, it's more likely that the action rods have become slightly distorted over time and, as Theo has said, it will need adjusting by gently bending the mechanism. Unless it is significantly worn or damaged there's not much point in replacing the pallet facing on just one pallet. You'd be better off replacing the facing on all the pallets with a felt/leather composite (which will make the action much quieter) and then adjusting the button height throughout.

Replacing the pallet facing is not difficult, but it is a bit fiddly and requires patience and a systematic approach. All the pallets will need to be removed from the rods, the old facing cleaned off, and the new facing glued on. Also use the correct materials. Don't be tempted to use chamois leather - it's generally too thin and uneven to make a proper seal. Use the proper stuff from Charlie Marshall:
http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#4
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Hohner 2 row C/F melodion
« Reply #29 on: May 27, 2014, 10:14:25 AM »

If it is the original Hohner pallet facing, it will almost certainly be a thin leather with no felt backing. Guaranteed to produce a noisy action.
I don’t know why, but I quite like this clickediclack. :|bl
Logged

nathen

  • nathen
  • Member
  • *
  • Offline Offline
  • Posts: 39
  • Vancouver, Canada.
Re: Hohner 2 row C/F melodion
« Reply #30 on: May 27, 2014, 08:39:02 PM »

Actually Sebastion, I quite like it too. I've seen some french folk bands, especially from the Auverne, have someone with sticks beating  out a rythym. I love that old music that often has a mystical and haunting quality to it.

The melodion is really suited to this kind of grassroots  music.

nathen
Logged
Life is not as serious as my mind makes it out to be!

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Hohner 2 row C/F melodion
« Reply #31 on: May 27, 2014, 09:38:34 PM »

Triskel, just to be sure, are you saying that the combined feet/swivel catches identify Hohner pokerwork boxes as prewar? Cheers, Brian
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner 2 row C/F melodion
« Reply #32 on: May 27, 2014, 10:45:16 PM »

Triskel, just to be sure, are you saying that the combined feet/swivel catches identify Hohner pokerwork boxes as prewar? Cheers, Brian

Basically yes Brian, that seems to be the way of it, though it's quite possible that there were sometimes pre-war parts used to make some post-war instruments.

I'd very strongly suspect that the tooling for those combined feet/swivel catches didn't survive the war years - there are known instances of such things.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Hohner 2 row C/F melodion
« Reply #33 on: May 28, 2014, 08:59:49 AM »

Triskel, thanks for that; I was a little uneasy about describing the Hohner 1040's I am presently offering for sale as prewar, but as they all have the combined feet/swivel catches I can relax.... (:)
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal