Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed chamber depth variation  (Read 6664 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Reed chamber depth variation
« on: May 20, 2014, 05:10:33 PM »

In Thierry Benetoux' book "Sounding out the Accordion" he shows reed blocks which have variable depth on the side of the push reed. Is there any basis in reality for doing this?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed chamber depth variation
« Reply #1 on: May 20, 2014, 05:39:11 PM »

Do you mean the ones where half the chamber back is scooped out ( Benetoux says it's to allow greater excursion for weighted reeds) ??
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed chamber depth variation
« Reply #2 on: May 20, 2014, 06:21:08 PM »

Yeah that's the one. I just don't understand why you wouldn't just make the chamber bigger?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed chamber depth variation
« Reply #3 on: May 20, 2014, 08:43:42 PM »

You can, if space allows, but there are tonal and volume differences that come with chamber size changes.  After some experimentation, I like the sound I get from very shallow reed blocks.  In my present blocks, I have to make a relief for the tips of the bigger reeds.  I only use that shallow a block on the treble side.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed chamber depth variation
« Reply #4 on: May 20, 2014, 09:31:22 PM »

I wonder if a larger chamber creates dead space - casting my mind back many years, to tuning two stroke motorcycles - air that has to be got moving that isn't directly activating the reed, at least initially.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed chamber depth variation
« Reply #5 on: May 21, 2014, 07:52:28 AM »

When space becomes an important  issue this may be a way of addressing the problem. I don't do this with my own reed blocks. I'm  rather generous when it comes to the largest reeds in every row (appr. 10 mm, more if weighted), not primarily out of fear that the reed may touch the chamber bottom but also to allow max. opening of the valve. Further up towards the smallest reed I am getting more stingy: the  shortest chamber will have a depth of about 4mm at its end. 
« Last Edit: May 21, 2014, 07:54:18 AM by diatonix »
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed chamber depth variation
« Reply #6 on: May 21, 2014, 08:53:15 AM »

We are at risk of confusing depth/contour with depth/volume? I think the latter matters and that better luthiers 'tune' chambers as resonators? Due to an commissioning cockup on my Gaillard, and making cockup on the vdAa I have some reversal helper reeds in the wrong size chamber, and despite Theo&co filleting in a bit of wood they definitely sound different in there.

But I too have noticed stepping at the back of larger chambers, especially when looking at un-reeded blocks on visits. Forgot to ask why, but have long wondered, interesting …
Logged
  _       _    _      _ 

Foma

  • Member
  • *
  • Offline Offline
  • Posts: 21
    • Гармонь
Re: Reed chamber depth variation
« Reply #7 on: May 21, 2014, 02:32:38 PM »

I have a book " Bayan (button accordions), accordions, garmon" - design and technology, but in Russian.
Translate into English the book difficult for me.
The chambers, a little:

 frequency chamber Fc, frequency reed Fr

 Fc/Fr ≠ 0,7-1,1 (that was not stalling of the flow)

 Fc/Fr≠ 7-9   (that was not dissonas)

 chamber depth should be minimal, slightly more than the maximum amplitude of the reed

 Fc = third harmonic Fr (it's desirable)
« Last Edit: May 22, 2014, 04:12:03 PM by Foma »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed chamber depth variation
« Reply #8 on: May 22, 2014, 11:07:55 AM »

Ta, some good tips there (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Reed chamber depth variation
« Reply #9 on: June 03, 2014, 08:09:32 AM »

Colin Dipper didn't think it matters when I asked him.
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed chamber depth variation
« Reply #10 on: June 03, 2014, 08:56:39 AM »

I see that those Formulae from the Russian book are both inequalities so they are giving chamber sizes to avoid. Generally resonance in reed chambers is a bad thing because it takes the energy out of the vibration of the reed tongue where you want it.  Occasionally you find this happens with one note, usually somewhere near the low D on a typical DG box.  This is not resonance of the volume of air in a chamber, but probably some sort of sideways rocking or twisting mode of the reed block. It can be cured very easily by connecting the tops of the reed blocks with a thin metal strap, something you see fitted on most modern boxes.  In the recent box building course in Yeovil I found examples of this in two instruments, which were quickly cured by fitting a strap.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed chamber depth variation
« Reply #11 on: June 03, 2014, 09:25:19 AM »

Thanks for that. The first mention of tuning chambers I had was in the 70's being allowed to handle a Wheatstone Edeophone (AFAIR). Much was made of its perfect resonances. Melodeon makers also hint at such things when talking up their reed block designs?

So to go for chamber sizing (stepped or otherwise) that avoids resonance is interesting ::) There is perhaps a parallel in plane design - modern fighters are designed barely stable and flown by a computer model? But I don't want certain notes speaking over loud, do I?

[btw]van der Aa is a great fan of the cross strap, but rather than a strap he uses a Z shaped bent rod, which has its own resonant properties. Swears by it, and I do like its sound (raw rather than mellow).[/btw]
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed chamber depth variation
« Reply #12 on: June 03, 2014, 12:09:30 PM »

I tried one of Frans's strap designs as a replacement of a conventional design.   I was unable to hear any difference.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed chamber depth variation
« Reply #13 on: June 03, 2014, 01:28:12 PM »

Nothing to add, but I was reminded of engine tuning, where the components of the cykinder head are matched and gas flowed to promote cleaner flow of both induction and exhaust gases.  Following on from that, I vaguely remember reading that in the days of music hall, concertina players would pack the "unused" space in the reed pans wby glueing in cork and carving it to minimise volume.  It was said to improve response and volume (loudness).  Of course, there were no references to changes in the tone of the instrument - making yourself heard over a couple of hundred drunks was all important!  Sounds familiar?

Rob.
Logged

Foma

  • Member
  • *
  • Offline Offline
  • Posts: 21
    • Гармонь
Re: Reed chamber depth variation
« Reply #14 on: June 04, 2014, 06:33:31 AM »

Chapter: “The influence of input chambers on acoustic parameters”
 (but russian language)
https://sites.google.com/site/fomagarmoshka/the-influence-of-input-chambers-on-acoustic-parameters
Logged

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: Reed chamber depth variation
« Reply #15 on: June 04, 2014, 08:58:40 AM »

Hi Foma,

For those of us endeavouring to make our own melodeons, that's a really interesting link - thank you for posting it.
Logged
Trying to learn enough magic to make my own melodeon.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed chamber depth variation
« Reply #16 on: June 04, 2014, 11:39:03 AM »

I suggest that those who haven't read Tom's paper here: http://www.concertina.org/2009/12/05/reed-cavity-design-and-resonance/

That sets out very clearly that resonances of the air in the chamber is a Bad Thing. The inequalities posted by Foma are a summation of this I think. This shouldn't happen unless there is a big mistake in how the reedblock is constructed (although I think that it can happen with the highest reeds). The issue of block resonance is a lot more evident as the frequency is easy to place amidst the playing frequencies. That's where the straps come in. I have seen Franz' strap and couldn't work out what affect it would have. His boxes are certainly very raw - whether this is due to that or anything else I don't know.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed chamber depth variation
« Reply #17 on: June 04, 2014, 12:15:29 PM »

From a purely practical, non-theoretical standpoint I'm of the opinion that in general reed chamber volume should be kept to a minimum for good reed response and volume of sound.  This becomes more important towards the higher pitches, and is quite critical for the highest notes on a DG.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Reed chamber depth variation
« Reply #18 on: June 05, 2014, 12:03:18 PM »


[btw]van der Aa is a great fan of the cross strap, but rather than a strap he uses a Z shaped bent rod, which has its own resonant properties. Swears by it, and I do like its sound (raw rather than mellow).[/btw]

Thanks for that mention Chris ... it set me thinking ...

I've long been unhappy with the conventional reedblock strap between reedblocks, usually made of aluminium and fitted with a screw on the top of each block... yes, it stabilises the musette on those few rogue notes, but at a substantial cost in terms of tone ... basically it can kill the full, round, deeper overtones and you end up with a more top-end sound.

I've done some experiments myself in the past and for a long time I've favoured the old Hohner approach of a thin pin/rod between the reedblocks. I've found this has less negative impact on the overall tone of the box, whilst stabilising the musette.

The suggestion of a Z-shaped strap-bracket, which Chris refers to, instantly made me think "Ahaaaa!!!!" ... so I do not know if the photo below has any resemblance to what Van der Aa uses ... but this is the strap I've just fitted to a melodeon. The idea is to create the bridge between the reedblocks that adds some stability, but also has some 'spring', or 'flex' or 'give'. The idea is deliberately not to create a structure that is so rigid it negatively affects the tone.

Anyways, I was extremely pleased with the result.... I'm just deeply annoyed I didn't think of it first!

cheers!

Mike R

« Last Edit: June 05, 2014, 12:05:10 PM by Microbot »
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed chamber depth variation
« Reply #19 on: June 05, 2014, 01:23:15 PM »

Frans's Z strap crosses three sets of blocks, rotated 45 deg or so clockwise. The middle block screws to middle of the Z, others to its tips.

So in essence, two V joins, one looping to left, one to right, same piece of metal, simple. I'd expect it to act as an acoustic spring. With the weight judged right it'll transmit a wave very efficiently, but advance its phase by a fraction. That fraction would be frequency dependent. 
Logged
  _       _    _      _ 
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal