Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: solidifying rods  (Read 2698 times)

0 Members and 1 Guest are viewing this topic.

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
solidifying rods
« on: May 23, 2014, 07:58:09 PM »

A have this cajun box with weak copper rods (see picture). The "wrists" of the rods are all weaken and the valves all have stronger pressure at the bottom than at the top. Bending every time it's starts leaking will lead to breakage. How would you solidify the wrists? With soldering, epoxy or some other way?

Thank you

Melodona
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: solidifying rods
« Reply #1 on: May 23, 2014, 08:41:52 PM »

I think you have a problem. Not a suitable metal, heating it makes it more bendy. You can "work harden". But if you want to do that, it might be easier to replace with a more suitable alloy.
Logged
  _       _    _      _ 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: solidifying rods
« Reply #2 on: May 23, 2014, 11:33:09 PM »

   solidifying rods ---- the mind boggles ---  ? a job for little blue pills!

george 
« Last Edit: May 24, 2014, 12:03:39 AM by george garside »
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: solidifying rods
« Reply #3 on: May 24, 2014, 12:07:45 AM »

Where exactly is the bending happening?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: solidifying rods
« Reply #4 on: May 24, 2014, 02:59:31 PM »

My understanding is the pallets do not land flat on the faceplate.  Could you correct the angle of the pallets by bending/unbending the rods at the bend half-way to the keyboard (to avoid weakening the 'wrist')?  If the rods prove too weak to keep their shape, it may be best to replace them (last resort).

Logged

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: solidifying rods
« Reply #5 on: May 24, 2014, 03:19:28 PM »

Hi, thanks for the answers.
Yes, like I said, all the pallets gradually bend up so the pressure is stronger at the bottom than at the top. The weak point where it's bending is what I call "the wrist" (see new picture attached). Bending them back (event at a different point on the rod), will hold for a little while, but then the wrists gradually bend back bringing the pallets out of tightness again.

Which is why I'm thinking nothing will work until those wrists are solidified and wondering if it's worth it.

Thanks again

Melodona
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: solidifying rods
« Reply #6 on: May 24, 2014, 06:12:41 PM »

How old is the box?

Did you buy it new? Was it from a shop?

In Britain, if it was bought from a shop or a trader, then you may have redress under the sale of goods act (depending up circumstances, this could even be several years down the line) as it is evidently not of satisfactory quality. I don't know what the law is in Canada, but I wouldn't be surprised to find a similar type of legislation.

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: solidifying rods
« Reply #7 on: May 24, 2014, 07:15:26 PM »

It's not mine. It's a client's box, custom made.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: solidifying rods
« Reply #8 on: May 26, 2014, 12:56:41 AM »

Back to the maker?   ???
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: solidifying rods
« Reply #9 on: May 26, 2014, 08:50:38 AM »

I think the problem may not be just the levers.  The levers attach to the centre if the pallet, so if the lever just pushes down then the pallet must lie flat.  I believe that the problem might be solved by slightly slackening the screws that attach the lever to the pallet.  This will prevent the lever from applying twisting forces to the pallet, and will allow the pallet to lie flat even if there is some flexing of the lever.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: solidifying rods
« Reply #10 on: May 26, 2014, 11:24:46 PM »

I think I know the maker by the crimp at the end of the rod flat.  He makes a lot of accordions, and I've never heard of that.  Are they all bending, or just one?  That part of the rod, where the round turns to flat, is the weak spot, and where breakage usually occurs, when it does.  And when the accordion is first built, there is some bending to get the valves to sit flat.  But if they're continuing to cock up, especially if it's more than one, there is another issue at play. 

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: solidifying rods
« Reply #11 on: May 26, 2014, 11:50:51 PM »

I was wondering if the user did the bending before the box came in for repair? The only box I've ever seen this on was a very old German Vienna style with metal rods that terminated in wire-frame pallet at a solder joint.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: solidifying rods
« Reply #12 on: June 03, 2014, 08:26:14 AM »

Some of the US made boxes use copper for the rods, and this fails sometimes. I usually replace the rod with Aluminium and then give it a clear coat of copper colored varnish to make it match. Copper looks nice but does make for good arms. The usually snap/ weaken at the screw closest to the key arm.
 Brass would be better.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: solidifying rods
« Reply #13 on: June 03, 2014, 09:28:14 AM »

Brass is notoriously brittle! Did you mean bronze?
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: solidifying rods
« Reply #14 on: June 03, 2014, 12:07:55 PM »

Brass is notoriously brittle! Did you mean bronze?

I don't think that is particularly helpful.
There are 100s of alloys that go under the name of brass, many of them quite durable. It also depends on what degree of hardness they have which can be affected by cold working and heat treatment.   Nearly all Wheatstone and Lachenal concertinas use brass action and they are noted for their longevity.   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: solidifying rods
« Reply #15 on: June 03, 2014, 07:44:58 PM »

Sorry, Theo. Yes alloys are very, very complicated (as The Comet discovered). I was passing on honest advice of son Fred, who works with metal (steel mostly) in a forge surrounded by massive bronze warship propellers.

But it's horses for courses. It may be fair to observe that concertina action is rather lighter. If brass is up to the relatively mild stress of a squeezebox action, fine.  At least we've learned that unalloyed copper … isn't?
« Last Edit: June 03, 2014, 07:48:30 PM by Chris Ryall »
Logged
  _       _    _      _ 
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal