The big bass reeds will have weighted tips and will carry on vibrating for a second or two after you have released the button/bellows. This is audible as a fainter 'twang'. However, as Malcolm has said, there is probably also some valve vibration going on too, which is audible as a buzzing noise when you change bellows direction. If the valves are old and made of leather, they are quite likely to be curled and stiff, which will add to the buzzing effect. Replacing the valves and/or adding a stronger valve spring can help eliminate this.
The other cause of 'twanging' which can sometimes happen is if, after the air pressure has shut off/reversed and the valve has closed, the residual vibration of the reed tongue can cause the tip of the reed tongue to momentarily come into contact with the valve, again causing a buzzing sound.
I also agree with Malcolm that the component reeds on the lower (C) of the two notes are definitely out of tune, causing an unpleasant-sounding tremolo. This is undesirable on bass reeds which should all be tuned to sound in octave unisons.
I think it is time your instrument went to a tuner/repairer for some work...