Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cleaning oxide and rust  (Read 3789 times)

0 Members and 1 Guest are viewing this topic.

IvanM

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
Cleaning oxide and rust
« on: June 16, 2014, 04:41:32 PM »

How do you clean green oxide of copper (don't know how it's properly called, I'm not a chemist; verdigris?) and simple rust from metallic parts? I'm not saying about rusty reeds (thank Apollo!), but mechanics etc. I can leave it alone but...
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Cleaning oxide and rust
« Reply #1 on: June 16, 2014, 05:06:59 PM »

As far as green copper oxide is concerned, a mild acid such as vinegar or lemon juice should help. However, it does depend on whereabouts in the box it is, how easy it is to get at and remove excess acid from, and what;s right next to it that might be adversely affected by the acid.
Red iron oxide (aka rust) is less easy; you might be able, again depending on the exact parts involved, to use a chemical preparation that converts red iron oxide to black iron oxide; otherwise it's down to the careful use of gentle abrasives. There must be the odd metallurgist (actually, pretty well all the metallurgists I know are fairly odd!) on here who can give you more detailed advice......

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

sammypenn

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Cleaning oxide and rust
« Reply #2 on: June 16, 2014, 06:53:28 PM »

  Rust removal? try "Evapo-rust", It works great for me, even does reeds, just soak the metal in the stuff for an hour or two. Its water-soluble, Non-toxic, non-corrosive and biodegradable. safe even in your eyes [if you have rusty eyes]. It just does exactly what it says on the plastic bottle. had to get my small bottle [32 fl. oz.]
Logged

sammypenn

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Cleaning oxide and rust
« Reply #3 on: June 16, 2014, 06:56:38 PM »

   Ah yes forgot to say had to get it from the states, via ebay.
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Cleaning oxide and rust
« Reply #4 on: June 16, 2014, 08:49:53 PM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Cleaning oxide and rust
« Reply #5 on: June 17, 2014, 04:44:34 AM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!

I've used white spirit and meths to remove grease, old wax and general crud, but I'm not sure what effect they or petrol would have on rust.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning oxide and rust
« Reply #6 on: June 17, 2014, 08:30:12 AM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!

Certainly does not work on steel petrol tanks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Cleaning oxide and rust
« Reply #7 on: June 17, 2014, 08:35:57 AM »

I use one of these for cleaning the top side of reeds:
http://www.maplin.co.uk/p/abrasive-polishing-block-hx04e

Oddly I have found the rust on the underside of reeds is much looser and can be removed by gentle scraping, otherwise some 240 grit silicon abrasive paper under the tongue will sort it out.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Cleaning oxide and rust
« Reply #8 on: June 17, 2014, 10:11:19 AM »

On the same subject, what is the best way to clean up a rusty grille? I have a couple of old Hohners with this condition. One is a Double Ray Deluxe, with a pressed chrome grille. Theo has mentioned metal polish before... What polish would this be? Anything abrasive seems to strip off the Chrome finish. So what do the prof restorers do?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning oxide and rust
« Reply #9 on: June 17, 2014, 12:03:59 PM »

Brasso

If it is heavy rust on the curved grill fitted to an Erica I would fit a new grill. The ones Hohner sell now are stainless steel so will stay bright.  The plating on the older ones is pretty thin and if there is more than light surface rust then some of the plating will be gone anyway.  You can also clean everything off with abrasives, then spray paint in any colour you fancy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Cleaning oxide and rust
« Reply #10 on: June 17, 2014, 01:34:39 PM »

Thx Theo.

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Cleaning oxide and rust
« Reply #11 on: June 17, 2014, 02:21:52 PM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!

I've used white spirit and meths to remove grease, old wax and general crud, but I'm not sure what effect they or petrol would have on rust.
Beware meths for too long!  I left some reeds in meths by mistake (days, not hours) and it corroded the reed plates. Didn't affect function, but looked pretty awful, dark splodges.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Cleaning oxide and rust
« Reply #12 on: June 17, 2014, 03:16:12 PM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!

I've used white spirit and meths to remove grease, old wax and general crud, but I'm not sure what effect they or petrol would have on rust.
Beware meths for too long!  I left some reeds in meths by mistake (days, not hours) and it corroded the reed plates. Didn't affect function, but looked pretty awful, dark splodges.

Thanks for that info: I've never left reed plates soaking for more than about an hour - usually less - and never had any problems. As they come out of the spirit they get a going over with a softish brush and a clean cotton cloth and are then left in the sun (one of the advantages of living in the Med!) to dry for 20 minutes or so. No problems so far........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Cleaning oxide and rust
« Reply #13 on: June 17, 2014, 04:54:37 PM »

as far as cleaning rusty reeds, I've been told that soaking them in petrol for a few hours works wonders!

I've used white spirit and meths to remove grease, old wax and general crud, but I'm not sure what effect they or petrol would have on rust.
Beware meths for too long!  I left some reeds in meths by mistake (days, not hours) and it corroded the reed plates. Didn't affect function, but looked pretty awful, dark splodges.

Thanks for that info: I've never left reed plates soaking for more than about an hour - usually less - and never had any problems. As they come out of the spirit they get a going over with a softish brush and a clean cotton cloth and are then left in the sun (one of the advantages of living in the Med!) to dry for 20 minutes or so. No problems so far........
Likewise - no problem with an hour or so.
Tom
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Cleaning oxide and rust
« Reply #14 on: June 17, 2014, 05:59:36 PM »

Quote
Rust removal?  try "Evapo-rust", It works great for me, even does reeds, just soak the metal in the stuff for an hour or two.

I tried it on a set of reeds after seeing it recommended on this Forum earlier.  It worked very well for me too, but there was an unexpected side effect: it removed the 'blue' at the base of the reeds.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Cleaning oxide and rust
« Reply #15 on: June 17, 2014, 07:44:41 PM »

Intuitively I think you are better off removing rust and corrosion on reeds mechanically rather than chemically.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal