Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5   Go Down

Author Topic: Ideas for a new English (or Welsh) melodeon maker?  (Read 20519 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #60 on: June 21, 2014, 04:10:18 PM »

... and Theo has another advantage of being 'small but beautiful'!


Take your word. Only seen photos...  :o

No reason why small can't give you economies of scale, that's just down to quantities, but the labour cost doesn't scale like the materials cost. Possibly the opposite.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #61 on: June 21, 2014, 04:21:16 PM »

We'll let Theo sort that last comment out  ;D

I suppose labour is a constant, as you say, but if cost of production = labour + materials, then the saving  would be on material if scales allow?
It just starts looking like, as Rees says previously, it costs more to produce a box than is realistic to sell.
It feels like labour intensive things, as often shown up in craft industries, where if you added in the true cost of labour the product would be outrageously expensive and no one would buy it.
We might be finding out why we have only a couple of indiginous makers, and why, as IanD says, people like Oakwood shut up shop.

Perhaps if labour is the problem, more people might go down the Pariselle route as there your labour is at your own cost.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #62 on: June 21, 2014, 04:34:15 PM »


We might be finding out why we have only a couple of indiginous makers, and why, as IanD says, people like Oakwood shut up shop.

With Oakwood I think the problem was that making boxes was not their core activity.  I am quite sure that it would be possible for a one person UK based melodeon builder to make a decent living making boxes.  You would probably do repairs too, and I strongly believe that doing repairs and tuning is the way in.  It allows you to build skills and a reputation, and both are essential.  Nobody will pay a realistic price for a box off someone unknown.  Colin and Rosalie Dipper have done it with concertinas and that is a much harder road than making melodeons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #63 on: June 21, 2014, 04:40:43 PM »

Carrying out tuning and repairs will increase your skill level and knowledge, that makes perfect sense.
I would think it also allows you to get a good look around other maker's boxes and see if a particular type of construction has advantages or inherant weakeness and faults.

Oakwood - as yousay, why choose a hard route if you've alreay an easier path to tread with more profit on the end.
Shame though.....
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #64 on: June 22, 2014, 12:54:40 AM »

Observation:


A 2 row box, slightly larger than a Lilly...
however two reed.. with button spacing for an adult.
Not as "precious" as a Tommy, flat keyboard, thumb groove.

As to bellows.
Ridiculously complex with archaic construction technique and materials.
Going back 20 plus years.. the RIP owner of ABC Music in So Calif and I.. completely redesigned bellows to used modern materials and construction techniques.. we were about to go ahead when he decided to have a terminal heart attack.  Still could be done.

There other advancements to be made in the "action" ( really nothing new if you present the current technology to an engineer, or free thinking tinkerer, inventor) with respect to buttons, levers, pallets etc.

Think outside the box.  ( pun intended.)

What is the word for "box" in Welsh ?
Logged

Lyra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 558
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #65 on: June 22, 2014, 03:55:41 AM »

what is this?
I only ask because it ticks some of the boxes (sorry) on the want list (although clearly not others as far as I can tell from the somewhat contradictory description) but seems to have sunk without trace. I just wonder if they were ever any good.
Logged

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #66 on: June 22, 2014, 08:42:31 AM »

It would be nice to have a box with easily exchangable reed blocks. The read blocks are enclosed in their own housing and can be exchanged quickly, for example to
switching from D/G to Eb/Bb. Maybe the reed block's housing could be designd is like drawer of a cupboard.
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #67 on: June 22, 2014, 10:03:31 AM »

melodeon, what were your ideas with regards bellows? I can easily imagine ways of building a better mechanism (I'll give it a go once this one is finished) but bellows I think are more tricky.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #68 on: June 22, 2014, 10:25:52 AM »



What is the word for "box" in Welsh ?

"Bocs" pronounced box
"Scwisbocs" pronounced squeezebox  (:)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #69 on: June 22, 2014, 11:09:31 AM »


We might be finding out why we have only a couple of indiginous makers, and why, as IanD says, people like Oakwood shut up shop.

With Oakwood I think the problem was that making boxes was not their core activity.  I am quite sure that it would be possible for a one person UK based melodeon builder to make a decent living making boxes.  You would probably do repairs too, and I strongly believe that doing repairs and tuning is the way in.  It allows you to build skills and a reputation, and both are essential.  Nobody will pay a realistic price for a box off someone unknown.  Colin and Rosalie Dipper have done it with concertinas and that is a much harder road than making melodeons.
When he was building Hilda's 38 key baritone G/D concertina, Neville Crabb told me that the only thing that kept them solvent was repairs and rebuilds. He said that when he added up the time needed to make a concertina it would have to sell for roughly double what the market would stand to make a viable business, and I doubt that this has changed in the last thirty years.

The position isn't as bad with melodeons because you can buy in many of the bits (reeds, action, bellows) which are made economically in larger volumes by firms whose sole business that is and who supply many box builders -- though I doubt that many of them become rich as a result. But it's easy to spend a vast amount of time making the wooden bits -- internal and external -- and then realising that when you divide the number of hours by the profit you're getting a pretty lousy wage for a skilled artisan...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #70 on: June 22, 2014, 11:18:00 AM »

I clearly remember when working in the North Sea seeing bits of equipment in meter lengths of very flexible plastic on a wire frame that looked and handled just like squeezebox bellows . They sat under my desk for weeks until the Production team collected them. Never thought to ask what their use was...... ???
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #71 on: June 22, 2014, 02:32:34 PM »

The bellows we designed were one piece and to be  "molded"  but did have a look like traditional bellows.

The pallet opening mechanism was originated in combustion engines.. a long , long time ago.

Additionally the pallets were reconfigured for better sealing.

Also think BOSE.
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #72 on: June 22, 2014, 02:56:59 PM »

It would be nice to have a box with easily exchangable reed blocks. The read blocks are enclosed in their own housing and can be exchanged quickly, for example to
switching from D/G to Eb/Bb. Maybe the reed block's housing could be designd is like drawer of a cupboard.


The bellows we designed were one piece and to be  "molded"  but did have a look like traditional bellows.
Interesting. Did you produce prototypes? How durable where they?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #73 on: June 22, 2014, 03:16:42 PM »

A moulded bellows would free up the design of the whole box.  With folded card you are in practice limited to rectangular boxes, well ok straight sided boxes with a small number if sides.  Moulded bellows could have curves!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ladydetemps

  • Emote Wizard
  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 3768
  • Castagnari Tommy D/G, Hohner 1 row 4 stop in C
    • My Youtube Channel
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #74 on: June 22, 2014, 03:36:02 PM »

What about 3d printing? Would that make elements easier to manufacture?

Matt (Kings Norton)

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 304
  • West Midlands, UK
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #75 on: June 22, 2014, 06:12:52 PM »

It would be nice to have a box with easily exchangable reed blocks.

Cooperativa do this on their (high quality) compact piano accordions and CBAs.  I forget the details but there's a kind of casing where the reed block sits that seems to rule out problems with airtightness.  You couldnt swap it out between tunes in a session though, it's quick and easy but not that quick.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #76 on: June 23, 2014, 01:40:10 PM »

from LdT: ' what about 3D printing....'
Dunno I can't print  ;D
( apologies, couldn't resist!)
Q ( 3d! )
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #77 on: June 23, 2014, 02:47:32 PM »

from LdT: ' what about 3D printing....'
Dunno I can't print  ;D
( apologies, couldn't resist!)
Q ( 3d! )

She's far too young to understand your half a tanner joke  ;)

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #78 on: June 23, 2014, 02:57:03 PM »

I suspect Mr Ellis (of this parish and Wensleydale) would offer no quarter in this respect either?  >:E
{my 3Dth worth} ;) C
Logged
  _       _    _      _ 

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ideas for a new English (or Welsh) melodeon maker?
« Reply #79 on: June 23, 2014, 04:48:56 PM »

Good point.   :-\
Oh well, you can but try.............
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!
Pages: 1 2 3 [4] 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal