Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: squeaking levers  (Read 3299 times)

0 Members and 1 Guest are viewing this topic.

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
squeaking levers
« on: June 27, 2014, 01:55:24 PM »

The model is a 2-row Boxeen.  The levers or springs or some part of the mechanism "squeaks" when depressing the levers. The lever/spring mechanism appears to be a standard design from Italian makers. I am able to remove both the top plate over the buttons and levers (also, the front grill) and the bottom plate under the levers giving me access for adjustments, repairs, lubrication.

Any suggestions to resolve this issue?

If photos would be helpful I can post.

Thanks.

Ken
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: squeaking levers
« Reply #1 on: June 27, 2014, 04:41:34 PM »

I am able to remove both the top plate over the buttons and levers (also, the front grill) and the bottom plate under the levers giving me access for adjustments, repairs, lubrication.
:o
Don't lubricate any part anywhere with anything except locksmith's graphite.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: squeaking levers
« Reply #2 on: June 27, 2014, 05:10:51 PM »

You need to do some detective work to identify the exact source of the noise. With the cover off operate the squeaky button and with a spare finger touch various parts of the mechanism with luck you will find one place where a touch silences the noise.  Often it can be a spring rubbing on a lever which can be fixed by bending the spring so it no longer touches.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: squeaking levers
« Reply #3 on: June 29, 2014, 07:53:09 PM »

Thank you for the recommendations.  I'll try to isolate the problem areas and let you know what I find.

Ken
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: squeaking levers
« Reply #4 on: June 30, 2014, 12:54:10 AM »

If you try the locksmiths graphite powder take it carefully, it can puff everywhere.

While not pure graphite a B or (as many numbers B as you have e.g. 2B, 4B etc) pencil applied at the possible point of squeak is a very handy source of dry lubrication with no 'overspray' risk and may even help you find the noise by a process of elimination (would there be a downside Theo?)

I have mixed graphite powder with methylated spirit (other solvent which evaporates to dryness will do) to paint on tower clock wheels and pinions where a durable coating has been required - keep looking at the tin of aerosol PTFE sitting on my shelf but am not convinced yet that it would last.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: squeaking levers
« Reply #5 on: June 30, 2014, 01:34:45 AM »

If you try the locksmiths graphite powder take it carefully, it can puff everywhere.
Minimise the risk by puffing it on to the tip of a small artist's paint brush or cotton bud and use that to apply the powder to the squeaky area.

Quote
I have mixed graphite powder with methylated spirit (other solvent which evaporates to dryness will do)
Yes, this is also a good method which allows the graphite to be 'flowed' into tight spaces. You can apply the graphite/solvent mix with a fine paint brush or cotton bud as before. Nail varnish remover is also a good, quick-evaporating solvent as an alternative to methylated spirit. Keep it away from celluloid though, as it will dissolve it!

Quote
While not pure graphite a B or (as many numbers B as you have e.g. 2B, 4B etc) pencil applied at the possible point of squeak is a very handy source of dry lubrication with no 'overspray' risk and may even help you find the noise by a process of elimination (would there be a downside Theo?)
Not such a good idea. Pencil 'leads' - even very soft ones - contain clay mixed with the graphite. The clay can be slightly abrasive, so it's perhaps best to avoid this.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: squeaking levers
« Reply #6 on: June 30, 2014, 02:39:18 AM »

if it turns out to be metal upon metal, then in a crude implement like an accordion, I would use oil. (a tiny bit of dust gathering after several years looks ok to me.)

this is unlikely to be well received here.   ;)

Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: squeaking levers
« Reply #7 on: June 30, 2014, 07:39:17 AM »

if it turns out to be metal upon metal, then in a crude implement like an accordion, I would use oil. (a tiny bit of dust gathering after several years looks ok to me.)

this is unlikely to be well received here.   ;)

Correct. Please don't use oil. As stated by the gentlemen above, once the problem has been isolated, finding the problem and eliminating it should be an easy job, though requing you to look and listen for very small bits rubbing against each other.

Using oil will be faster, but could lead to a world of other issues. I for one just spent last weekend with steel wool and a box of cotton-tips removing old crusted oil (that had gathered any speck of dust within a radius of 10 miles it seemed!) from a treble mechanism, where someone opted for the easy solution.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: squeaking levers
« Reply #8 on: June 30, 2014, 09:17:48 AM »

if it turns out to be metal upon metal, then in a crude implement like an accordion, I would use oil. (a tiny bit of dust gathering after several years looks ok to me.)

this is unlikely to be well received here.   ;)

So don't give stupid advice then!

People who do that cause grief for future owners and repaiers of the box.  If it's some cheap rubbishy box that will be lucky to last a decade then go ahead and use oil, but remember that whenever you play you are passing large volumes of air through the mechanism, the less airborne dust you catch in oil traps the better.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: squeaking levers
« Reply #9 on: June 30, 2014, 09:55:11 AM »

Not oil, but I'm sure Nils Neilsen put something that looked grease-like on my bass mechanism metal parts. What would that have been?
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: squeaking levers
« Reply #10 on: June 30, 2014, 10:39:59 AM »

if it turns out to be metal upon metal, then in a crude implement like an accordion, I would use oil. (a tiny bit of dust gathering after several years looks ok to me.)

this is unlikely to be well received here.   ;)

So don't give stupid advice then!

People who do that cause grief for future owners and repaiers of the box.  If it's some cheap rubbishy box that will be lucky to last a decade then go ahead and use oil, but remember that whenever you play you are passing large volumes of air through the mechanism, the less airborne dust you catch in oil traps the better.



 I wouldn't say it was ''stupid'' advice, but certainly a less popular option for the sort of reasons mentioned.
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: squeaking levers
« Reply #11 on: June 30, 2014, 01:11:55 PM »

There are quite a few non-sticky lubricants available, using either wax or PTFE as the dry lubricant.  Co-incidently I've just eased the air bar on my Echo, and used the hard wax that I use on woodworking tools.  That's one area where graphite wouldn't be appropriate.
Logged
Tony S

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: squeaking levers
« Reply #12 on: July 14, 2014, 09:51:39 PM »

Update:  I bought a can of "spray graphite" (graphite in a evaporative liquid medium in a can with a propellant).  Wisely, I didn't just wildly start shooting at the innards of the accordeon but instead sprayed a small quantity into a cup then used a #0 artists brush to judiciously apply the lubricant where needed.  The problem areas were where the springs sit against an aluminum backing/support board (not sure of the terminology).  The squeaks are gone and there is a bit more freedom in the key movement.

Thanks to all who responded with thoughts and advice and suggestions.

Ken
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: squeaking levers
« Reply #13 on: July 14, 2014, 10:52:17 PM »

Had this problem on one note only. Quick fix was to strip a piece of insulation off a piece of wire of similar gauge and slip it over the end of the spring leaving a slight overhang to stop it rubbing on the bass plate.The pressure of the spring keeps it in place.Still OK after about a year.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal