Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: How do you bend notes like this?  (Read 8400 times)

0 Members and 2 Guests are viewing this topic.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: How do you bend notes like this?
« Reply #40 on: July 05, 2014, 10:08:51 AM »

How about Prof Ryall??  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How do you bend notes like this?
« Reply #41 on: July 05, 2014, 12:31:02 PM »

How about Prof Ryall??  ;)

I'm nothing to do with this!  8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: How do you bend notes like this?
« Reply #42 on: July 05, 2014, 02:01:58 PM »

Had a go on the M (non tremelo) bank on my G row. Interestingly C is (again) the best bender. Yes it moves about 6 cents down on pressure.

"Throttle and haul" was really interesting! I get a nice bend, comes up at about 44 cents on the FFT. There is a (more) noticable tone change on the M reed, and yes it sounds not unlike Steve doing a good bend on mouth organ.

The A reed will actually bend further, with more tone distortion, but the FFT shows a quantum jump to G# at that point. Displays as a true G# give or take 1-3 cents.
Bending on harmonicas normally involves lowering the frequency by at least 100 cents. On hole 3 (= button 2) you bend over 300 cents. So it's interesting, that you report a change from A to Ab (on which button?).
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: How do you bend notes like this?
« Reply #43 on: July 06, 2014, 06:18:02 AM »

I have a 4th start keyboard "evolved" from my Oakwood, If it was A then that is button 4 for me. but does the number matter.

Note that I didn't say it swings to Ab, merely that it displayed as such on the FFT tuner. By ear it was about half way, and I suspect 51 cents (if 100=semitone) was enough to trigger the change. I cannot explain why the display had it as true +/- a few cents either. but these programs are prone to artifact. By ear it was less.

Just showed the bend to Frans who runs a stall in Gooik. He hadn't really thought about playing that way :o We decided (this over beers) it wasn't "a fault". I felt I could bend if I wanted, or bring in a second voice and stabilise. So "a feature". He couldn't think of anything in his blocks that might promote bending. We seem to have established that it needs single voice, or totally dry bandonéon?

News: by "sheer violence" I got a higher voice reed to bend a semitone "by ear". didn't feel as good as it sounded and I won't make a habit of it …
Logged
  _       _    _      _ 

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: How do you bend notes like this?
« Reply #44 on: July 06, 2014, 07:28:59 AM »

but does the number matter.
The number doesn't matter per se. What matters (on the harmonica) is, that the gap between upper and lower reed in this hole is bigger than in any other: 400 cents. As the melodeons row-arrangement is (nearly) identical, you'll find the same gap on the corresponding button, which is usually the 3rd.

One interesting aspect of bending (on the harmonica) is, that it enables the playing of missing notes. If what I understood is correct, than bending on the melodeon does not allow this in a reliable way.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: How do you bend notes like this?
« Reply #45 on: July 06, 2014, 08:00:40 AM »

Assuming upper/lower = push/pull in some way … it's paired with G. Is that 200 cents? (Still not sure about this odd currency)!

All my reeds will bend to some extent when single voiced and abused as per above. I guess I could look into the paired reed issue, I have some ½ tone, some tone, some wider. I need a partner in crime here … anyone else doing this? I'm yet to be convinced that it is a reed-reed effect, but little evidence as yet. There could be a PhD in this for the right chap >:E
Logged
  _       _    _      _ 

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: How do you bend notes like this?
« Reply #46 on: July 06, 2014, 10:16:17 AM »

Assuming upper/lower = push/pull in some way
upper = higher frequency, lower = lower frequency. (Sorry for my bad English.)

Is that 200 cents? (Still not sure about this odd currency)!
100 cents = semitone, 200 cents = tone

I'm yet to be convinced that it is a reed-reed effect, but little evidence as yet.
On the harmonica: yes. Cf. the article Was passiert beim bending physikalisch? and the literature (in English) which is referenced there.

On the melodeon/accordion: Possibly not.

There could be a PhD in this for the right chap >:E
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal