Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: physics of bending  (Read 5819 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
physics of bending
« on: July 06, 2014, 11:56:09 AM »


[nerds and physics PhDs only!] Thanks to Sebastian for his lead on the "playing" thread. As this is an English forum, here is a crudely tidied Google translate App'd version of his reference

The so-called bending (from the English word), bending down of the sounds, is mainly in blues [and] an important style element on the harmonica. But why does it work at all? Why does the oscillation frequency of a reed [defined by] the play technology are change?

studies are occasionally been made [and] the scientific work reported in the literature, as well as at the Institute of Musical Instrument Making in Zwota (Saxon Vogtland). Bending is most often used on the blues harp, a 10-channel diatonic harmonica tuned to the just system. An explanation was first given writ this example.

In this type of harmonica  in each channel or "comb" contains two reeds, one for the blow note and one for the suck. It has been shown that both reeds oare involved in the blues-bending. Bending only works (properly) when one of the two reeds tuned involved is at least a whole step lower than the other.

If the higher reed is a pull, the channel concerned only shows draw-bending (ie, the draw notes can be bent); This is the case in the leftmost channels of a Blue sharp. In the right channels the blow reed is higher in pitch, and it exhibits blow-bending (albeit difficult to control). In channels 5 and 7 on the harmonica is no "real" bending is possible, where "real" means at least one semitone.

Consider the (easier to learn and to control) pull-bend: [?] The bending is controlled by changing the mouth and throat aperture and makes the sound deeper. The deeper the sound the more  the note swings., [? if the lowest note is reached, the Pull-tab has to swing almost completely ceased ?]

This can be seen in the mirrorq on a diatonic harmonica with dismounted casing. Bahnson et al have also shown this by measurement (which would be trivial - you can see it, after all, too - if they had not examined the relative phasing of the reeds).

Now to the physics: we have here a system of three (not two!) oscillatory structures. These are the two involved reeds, and the column of air in mouth and throat. The latter is located at the harmonica opening and should ideally be in resonance with the vibration of the reed being played.

In this case, the sound is loud and beautiful. If we now change mouth and throat position, so that its resonance frequency is lower,  harmonica reed is oscillation changes accordingly, ie it swings not to its own resonant frequency, but rather makes a forced oscillation at the resonant frequency of the system of reed (n) plus the air column.

This frequency may approach the resonant frequency of the second reed (here, the blow), inducing this to vibrate. At the deepest bend only the blow reed vibrates, though the air flow actually is in  the "wrong" direction! Its note is about a semitone above the frequency with which the reed would swing if blown.

Further lowering of the resonant frequency of mouth and throat cavity does not lead to deeper tone, rather to a defocussing of the oscillation.  Johnston [1] uses a mathematical model to explain this that anticipates complex acoustic functions and is not altogether clear.  The lower frequency limit of bend is thus a system property and can not be derived solely from the properties of the reeds.

Bending also works in chromatic harmonicas, albeit limited.  In these the reed not in play is each closed by a valve. This means that when blowing a valve closes and the Pull reed can affect another blow reed [?]  So there's  always just one [chamber?] involved in the tone even when bending.

The bend on the chromatic harmonica is therefore - as already indicated - restricted, and in such a way that the sounds do not bend down  as far as on the diatonic. Actually,  distinction between diatonic and chromatic instruments at this point is not entirely correct. One would rather speak of unventilated and ventilated instruments. The difference is particularly playing "pseudo-chromatic" in the diatonic, or harmonica with slider, sold respecively [as?] Koch Chromatic, and as Slide Harp by Hohner. The former has no valves and therefore offers full [bending], the latter is equipped with valves and only offers limited bend- but is louder than the Koch Chromatic, which suffers from air leakage through the valve mechanism.


Got a bit lost toward the end! Help would be appreciated. Shall we continue mechanistic (rather than stylistic) discussion here?
Logged
  _       _    _      _ 

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: physics of bending
« Reply #1 on: July 06, 2014, 01:35:20 PM »

Bending on the accordion has to work differently so I don't know if it makes sense to further extrapolate from the harmonica (as already mentioned by Steve).
Logged

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: physics of bending
« Reply #2 on: July 09, 2014, 09:28:46 AM »


The bend on the chromatic harmonica is therefore - as already indicated - restricted, and in such a way  that the sounds do not bend down  as far as on the diatonic. Actually,  distinction between diatonic and chromatic instruments at this point is not entirely correct. One would rather speak of unventilated and ventilated instruments. The difference is particularly playing "pseudo-chromatic" in the diatonic, or harmonica with slider, sold respecively [as?] Koch Chromatic, and as Slide Harp by Hohner. The former has no valves and therefore offers full [bending], the latter is equipped with valves and only offers limited bend- but is louder than the Koch Chromatic, which suffers from air leakage through the valve mechanism.[/i]

Got a bit lost toward the end! Help would be appreciated. Shall we continue mechanistic (rather than stylistic) discussion here?
Hi Chris
I'm only replying because you asked for an explanation of the above quote about harmonicas. I think that Sebastian and I are in agreement that the applicability of this sort of info to melodeons is not straightforward. All the following is simple descriptive stuff about different harmonicas. 'Chromatic' harmonicas are essentially two harps in one (usually a semitone apart) with the breath directed to one or the other via the operation of a slide mechanism. Most models of chromatic are fully valved, that is every reed (except the very highest-pitched one or two) has a valve. The main purpose of these valves is to reduce air leakage from the slide mechanism, and indeed they are often referred to as 'windsavers'. (As described in my earlier posts, they do also allow bending, though most chrom players don't use this facility since the instrument is, after all, fully chromatic.) However, the quote is correct in pointing out that it is not the chromaticity of the instrument that determines bendability, but whether or not it is valved ('ventilated' or not in the quote). And it is also correct that there are a small number of harmonica models, usually cheaper beginners' instruments but also the Hohner models mentioned, that have slides, are chromatic (in some cases nearly so), but have no valves/ windsavers.

Basically, that's what the last bit of the quote is saying. We tend to speak as if all chromatic harps are valved. The vast majority are, but a few aren't. Hope this helps, though probably only for the record!
Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: physics of bending
« Reply #3 on: July 09, 2014, 09:41:52 AM »

And Brendan Power has developed a harp that enables the player to bend on the blow note...

Logged
On the edge of Cheshire's Golden Triangle, apparently...

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: physics of bending
« Reply #4 on: July 10, 2014, 05:20:32 PM »

Don't know much about harmonica reeds. On a melodeon we have no other reed to couple with and we have no variable volume to couple with (except in bluesbiz accordions). All very complicated and a bit above me to be honest. The bending that I've been able to do on box is to do with restricting the air supply by cracking open a pallet - can't really visualise why this would cause the note to bend but interested if anyone has any ideas!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: physics of bending
« Reply #5 on: July 11, 2014, 12:40:09 AM »

Don't know much about harmonica reeds. On a melodeon we have no other reed to couple with and we have no variable volume to couple with (except in bluesbiz accordions). All very complicated and a bit above me to be honest. The bending that I've been able to do on box is to do with restricting the air supply by cracking open a pallet - can't really visualise why this would cause the note to bend but interested if anyone has any ideas!
I think there is a variable volume effect. The nearly closed pallet may be creating a nearly enclosed resonant chamber (Helmholtz chamber?) with its own specific frequency which modifies the natural reed tongue frequency. This effect disappears as soon as the pallet is opened more than just a crack. See my clarinet mouthpiece analogy on the related thread to this one.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: physics of bending
« Reply #6 on: July 11, 2014, 07:01:35 AM »

All I know is that I think I suck harder and direct the sucking towards the bottom of the instrument.  I've been playing blues harp for nearly 40 years, and discovered the technique by experimenting  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: physics of bending
« Reply #7 on: July 11, 2014, 01:56:23 PM »

Don't know much about harmonica reeds. On a melodeon we have no other reed to couple with and we have no variable volume to couple with (except in bluesbiz accordions). All very complicated and a bit above me to be honest. The bending that I've been able to do on box is to do with restricting the air supply by cracking open a pallet - can't really visualise why this would cause the note to bend but interested if anyone has any ideas!
I think there is a variable volume effect. The nearly closed pallet may be creating a nearly enclosed resonant chamber (Helmholtz chamber?) with its own specific frequency which modifies the natural reed tongue frequency. This effect disappears as soon as the pallet is opened more than just a crack. See my clarinet mouthpiece analogy on the related thread to this one.

Ooh, interesting! You could be right.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: physics of bending
« Reply #8 on: July 17, 2014, 12:00:48 PM »

Greetings All!

I'm a harmonica hacker & player interested in all things free reed. I've been so much enjoying reading the posts here that I felt compelled to join the forum.

Regarding bending notes, it's correct that there are two types on harmonicas: Interactive Reed Bending (on un-valved or partially valved harps where the blow and draw reeds are in the same resonance chamber - such as the standard 10 hole diatonic) and Isolated Reed Bending (on fully valved harps like the stock chromatic harmonica, where the valves isolate each reed depending on breath). Interactive Reed Bending sounds far better and the bent pitch is easy to sustain and control with practice. This is the classic 'wailing' sound associated with the 10 hole so-called Blues Harp.

Since all keyed free-reed instruments (melodeons, accordions, concertinas etc etc) are fully valved, its only theoretically possible to get Isolated Reed Bending on them. Some can do it with careful manipulation of the buttons and bellows. My musical buddy Tim Edey is pretty good at it, but at best it's very limited. The pitch of the bent note cannot be controlled or sustained. It's not a patch on the bending you get from a diatonic harmonica, or even a chromatic, as the human mouth can make subtle instantaneous alterations for every reed pitch to control the bend.

However, that's not the end of the story. There is one man you should DEFINITELY know about if you don't already: Tom Tonon. He has researched bending notes on accordions & related boxes exhaustively, especially the relationship between the resonance frequency of the reed and its chamber (Helmholtz resonance). He has created a system that can activate controlled bending through manipluating this relationship, using special housings around the reeds inside the box that are activated by a lever connected to the keys, for both piano and button boxes.

Here is his patent with excellent drawings of the sound chamber and key mechanism:
https://www.google.com/patents/US5824927?dq=tom+tonon&hl=en&sa=X&ei=SqjHU57aGo2V7Ab1z4DgBw&ved=0CBwQ6AEwAA

It frankly surprises me that this brilliant innovation for squeezeboxes seems to be so little known or appreciated. I've told my box-playing friends about Tom's work, but no-one seems interested. Surely that's the biggest drawback of bellows free-reed instruments: lack of bending expression. Tom has gone a long way to finding a solution. Now it just needs lots of good players to explore it and create a whole new sound. Maybe some of you will take that step - I hope so!

Check out Tom's website for fascinating info and soundclips: http://bluesbox.biz/ His email is up there too.

Brendan Power
« Last Edit: July 17, 2014, 11:17:25 PM by BeePee »
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: physics of bending
« Reply #9 on: July 17, 2014, 02:35:58 PM »

Brendan Power
Brendan Power on Melnet! 

The bluesbox.biz was sometimes mentioned here (Google search), but didn’t create much attention.

Edit: schpelling
« Last Edit: July 17, 2014, 03:17:32 PM by Sebastian »
Logged

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: physics of bending
« Reply #10 on: July 17, 2014, 03:13:40 PM »

(Hi Brendan, nice to see you here!)

I've been a bit surprised/disappointed Tom's technology hasn't taken off too; I guess it needs an innovative manufacturer to take it on for it to take off - Tom doesn't seem to have the links with a maker to make it happen. With the new legion of bespoke French manufacturers out there, and people like Owen here experimenting with computerised manufacturing tools, there are distinct possibilities. [[[ Owen, I think there's the gap in the market here, and your acoustic science skills make you very well placed to exploit it - just saying! ]]]

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: physics of bending
« Reply #11 on: July 17, 2014, 06:32:46 PM »

Thanks for that insight (:) i am in rural France just now, but will copy this innovation into our 21st Century Box thread when I get back (unless anyone else wants to do it)

fwiw Norbert Pignol also thinks bending on the harmonica a totally different process
Logged
  _       _    _      _ 

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: physics of bending
« Reply #12 on: July 17, 2014, 08:09:43 PM »

I have come across Tom's work and find it very interesting (coupling with a variable volume is very similar to isolated reed bending with the human mouth as Brendan says). I would love to have a go on one and get involved, but I have one too many projects on at the moment!

Welcome to melnet Brendan, please stick around!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: physics of bending
« Reply #13 on: July 17, 2014, 10:34:18 PM »

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: physics of bending
« Reply #14 on: July 17, 2014, 10:36:10 PM »

Hi Brendan and all,

I got dead excited indeed when I first encountered the blues box technology invented by Tom Tonon - so much so that I immediately tried to contact him and had all sorts of ideas about how it could be applied to my playing.  The email conversation was fairly short - the first stumbling block is that the reed-bending only works on single reeds because of tremolo issues caused when applied to bending multiple reeds (they don't ever bend at exactly the same time) ... for me 2,3 and 4 voiced instruments are the sounds that show the melodeon in it's best light - I could never be happy with a 1 voice instrument.

It also became clear that I would have to send a melodeon abroad to be converted at not inconsiderable cost without a realistic chance of trying an instrument out to see if it would work for me.

After that I very quickly lost interest in the whole idea and have to satisfy myself with the odd cheeky bent note done manually on a low pull reed on a  single voice setting.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: physics of bending
« Reply #15 on: July 17, 2014, 11:06:04 PM »

Thanks for the warm welcome :-) Happy to move this chat to the The "21st Century Box" if Chris wishes.

Here's one more idea for bending on 21st Century squeezeboxes: magnetism! The steel reeds are perfect for it.

Before you laugh: it's already available on harmonicas, in a unit called the "Turboslide". Not my idea, but I've done a promo video on it for the Seydel company (see from 1:35 onwards):

THE TURBOSLIDE
https://www.youtube.com/watch?v=PVMrzPbVXsg

It's invented by a very clever bloke called Jim Antaki, an American heart surgeon who also invented one of the most widely used artificial hearts. He has a fascination for harmonicas and has come up with quite a few interesting innovations in addition to the TurboSlide. He's currently working on one called the ELX, where the reeds trigger optical sensors and the signal is amplified. Here's his website:
http://www.turboharp.com

Getting back to the magnetism idea: on harmonicas the TurboSlide is quite easy to construct, because the magnet strip runs along the top reedplate, which has the recessed blow reeds beneath. There is no slider on the bottom, partly because the draw reeds protrude, and partly because there is no need: you can bend the draw notes via the well-known blues-style embouchure control, as shown in the video.

On boxes you have blow and draw reeds on the same plates, so it would be VERY tricky to make a magnet strip that affected the blow and draw reeds separately.

But who knows: this might get some of you thinking and eventually we could see it on a melodoen! As the TurboSlide shows, magnetism really works to give controlled pitch bending on ferrous free reeds, and it's a great sound!





« Last Edit: July 17, 2014, 11:07:56 PM by BeePee »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: physics of bending
« Reply #16 on: July 17, 2014, 11:35:39 PM »

Sounds interesting.  Has the turboslide been tried on non-ferrous reeds?  If it is an eddy current damping effect then it would work on any reed material that is electrically conductive.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: physics of bending
« Reply #17 on: July 18, 2014, 12:02:14 AM »

It's purely magnetic, in the normal sense of the word.

Jim tried attaching small magnets to the brass reeds of Hohner harmonicas, but could find no glue that would stand up to the shearing forces caused by the reeds' vibration.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal