Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Playing in a dance band  (Read 9031 times)

0 Members and 1 Guest are viewing this topic.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Playing in a dance band
« on: July 18, 2014, 04:01:12 PM »

This general topic emerged from a thread started by EastAnglianTed seeking fellow musicians, and it sort of morphed into a general discussion about playing in a dance band.

As there seemed to be some interest being expressed in this separate topic, I hope EAT won't mind if we continue the discussion here, as I feel a little bit embarrassed about being such a drifter!

I wanted to comment on the suggestion raised there that monitors may not be necessary.  I have played in bands where this philosophy ruled - we all sat close together and listened intently to each other acoustically.  And in a small band, of say two people, I think it does sometimes work just to use separate amps. 

However, any more musicians than that, and I'm of the opinion that not only do you need monitors, but also the quality of the monitor system will probably determine whether you enjoy playing.  For some very quiet (mainly outdoor) gigs, you may be able to get away without, but once you get into a noisy crowd in a hall with poor acoustics, things will quickly fall apart if you don't have a good foldback system.

(I'm not talking about personal stations here - I know that new and individual ideas about playing in bands are emerging as technology changes, but I have yet to see that applied to a folk dance band setting, so can't comment on this area.)
Logged

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Re: Playing in a dance band
« Reply #1 on: July 18, 2014, 06:06:18 PM »

I am in complete agreement with Chris' statement about the importance of monitors and being able to hear yourself.  I think it is the single most important element for musicians enjoying playing for a dance or audience.  I have started using a Bose L1 compact for our contra dance band (4 piece: fiddle, mandolin, flutes and whistles and piano).  I use a Mackie mixer feeding into the L1 compact.  I use a separate Fender Acoustisonic amp for the caller so the calls do not muddy the mix of instruments and vice versa. When using the L1, we do not use monitors. The L1 is placed behind the musicians and acts as a loud speaker and monitor. It works pretty well, although I would not try to mix more than 4 instruments through one L1. It was originally designed for two channels, as for a guitarist/vocalist. I also play with an English Country Dance band which owns and uses a number of L1's both for the musicians and the caller. This is an even better setup that I would use if I could afford it. I have no financial interest in Bose but I like this system for its light weight and simplicity. My two cents.  Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Playing in a dance band
« Reply #2 on: July 18, 2014, 07:59:50 PM »

Interesting - I'd not heard of mixers being used with these stations before, I'd thought they were intended as just personal, and the intention was to have one each, like your English Country Dance Band setup.
Logged

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Playing in a dance band
« Reply #3 on: July 18, 2014, 09:52:25 PM »

We never used monitors (couldn't afford them) and never had a problem. In fact, one of our best gigs ever was in a place with volume metres, and we were too loud with a PA, so we just used it for the caller.

PAs are sometimes more trouble than they are worth for instruments. Most boxes, fiddles, and banjos are plenty loud enough for most venues, the only thing that needs help is the callers voice.

Always remember your purpose is to okay for dancers to dance to, it's not a performance for people sitting there listening.

Rant over !  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Re: Playing in a dance band
« Reply #4 on: July 19, 2014, 02:38:44 AM »

Chris:  On the Bose users forum, there are quite a few musicians who use the Bose systems with an outboard mixer like I do.  Bose also makes its own proprietary 4 channel mixer called the Tone Match which costs about $500.00. I went for the Mackie to have centralized control of the band and to have more channels if I needed them. Also it was cheaper than the Tone Match. In a situation where there are a group of L1's, there is a tendancy for musicians to boost their own sound at their station and this can get out of hand. With the English Country band, this is not a problem so far.  Even though we are Americans, there is a civility in the players similar to members who post on this forum.

Pikey:  Glad no sound system monitors works for you. I wish I could do away with the sound systems altogether because they are a pain in the a%# to deal with. But if I use one I want to hear how the band is sounding. The Bose is a good compromise for me. All the best  Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Playing in a dance band
« Reply #5 on: July 19, 2014, 08:04:05 AM »

The greatest problem with using foldback is the amount of "wash" coming from the stage and tending to muddy the sound heard by the closest dancers. This is particularly worrisome when the caller is in the foldback mix and it becomes difficult for dancers to hear instructions clearly. On occasions when I have been calling, I have asked for my voice to be excluded from the foldback mix. Worked for me, although I sometimes had to resist the temptation to SHOUT unnecessarily.
Logged
Tuner/repairer, now retired.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Online Online
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Playing in a dance band
« Reply #6 on: July 19, 2014, 08:23:46 AM »

Bose: The basic L1 has only two input channels.
The L1 S and L1 II have the option to add four more channels so you can put all or most of the band through 1 system.
It's expensive for what it is, and it has a fairly sharp upper limit on sound volume, above which it's feedback city because the speakers are behind you and the mics are pointing straight at them.

Need for PA does not just depend just on size of venue - it's about background noise. When you set up in an empty room you might think you don't need it, but let in a wedding or a student boat club dinner full of drunken rowdy guests with everybody shouting excitedly at each other and you need extra power to be heard over that.

Caller: we almost never put the caller in the monitors. I think I did it once about 20 years ago in exceptional acoustic layout where we couldn't hear the caller at all from the FOH speakers.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Playing in a dance band
« Reply #7 on: July 19, 2014, 09:33:51 AM »

Sitting in a tight little group with acoustic instuments might be the way you like to play with your band. I need to be able to move about and have never done the sitting down bit.

Having a lineup with electric guitar and bass plus a drummer with a full kit means we cannot play without foldback. We all have our own monitors, plus the guitar amps, which link to the PA via a mixing desk. Luckily our guitar player has a sideline in supplying sound systems to events so setting up is quick and easy. All the levels are set up on  his ipad nowadays. So usually it is just the volume outfront to adjust as our preferred settings have been saved on the mixer.

Having said that it was nice in the old days to just turn up and play without having to hump all the gear in and out.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Playing in a dance band
« Reply #8 on: July 19, 2014, 10:01:08 AM »

Quote
Most boxes, fiddles, and banjos are plenty loud enough for most venues

I wish I could agree with that, Pikey.  When the venue is empty, maybe true, but get a few people through the door, and let them have a beer or two, and IMO not only do you need PA for them to hear you, you need it for the band too.  And if the acoustics are poor (usually but not exclusively because of a high roof), your difficulties are multiplied.

I also don't put the caller through the foldback, like Anahata.

I can see that using personal sound equipment like the L1 must require the band to have a lot of discipline, sound understanding and self-awareness.  I've found that in every venue, I set up our mixer with  the same predetermined mix which we carefully developed in a hall, with no audience.  I try not to depart from that unless there's a strong reason.  It is so easy when the acoustics of a venue are awful for individual band members who can't hear themselves enough to panic and ask for more volume for themselves.  OK, you can turn them up in the foldback mix, but that often makes things worse overall, and then others panic too. 

The person on the desk probably understands these problems best, and I would worry about a danger of the band collectively losing control of their overall sound if everyone has their own volume control, as it were, on their L1.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Online Online
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Playing in a dance band
« Reply #9 on: July 19, 2014, 10:34:33 AM »

One exception to the caller foldback rule: some callers want to be able to hear themselves in the monitors. Dave Hunt likes it really loud, and we once solved that by putting a JBL control 1 on a mic stand (mine are already adapted for this) right next to his head with just his voice in it - he loved it!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Playing in a dance band
« Reply #10 on: July 19, 2014, 10:37:45 AM »

On stage volume easily gets to be an arms race, and foldback/monitoring is generally a load of hassle.  Made worse when you have a mix of acoustic instruments and guitar/bass/keyboard with backline amps.  It's hard to get people to really accept that foldback should be there so that you can hear the rest of the band, it's not there for hearing yourself in order to be able to play!  >:(  If it has to be used like that, some people are too loud!

I agree that no amplification is a non-starter most of the time, for the reasons already given.  Particularly when you have those tables of non-dancers who just sit and chat all evening.......
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Playing in a dance band
« Reply #11 on: July 19, 2014, 12:19:46 PM »

Our band use a JBL system, (active speakers and a mixing desk) to which we have added a couple of cheap active wedges for foldback.  We've payed in halls where the volume was very low, but a PA is still needed to get the balance of the instruments right, and one memorable occasion where we were at full chat and all the sound just wafted off down the hall - it was an indoor cricket pitch!

Foldback can be a thorny issue and it is interesting that the more sensitive amongst us (counts me out!) are quite specific about what they want emphasised so as to keep the band tight.  Our keyboard player likes to have the box brought to the fore to keep the rhythm tight and as I'm sat next to the concertina I don't need him in the mix - a Jeffries anglo cuts through anything and we've been playing together for years.  In fact, I've noticed that I sit so that I can see his hands in my peripheral vision and he also watches me.  The only instrument (?) not on the PA is the drumkit - we've never felt it was needed.  Nor do we have the caller in the foldback.  When the foldback has not been to my liking, I find I can hear myself from the echo off the far wall... just tune in to the tone and frequency.

Rob.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Playing in a dance band
« Reply #12 on: July 19, 2014, 12:22:31 PM »

Quote
Most boxes, fiddles, and banjos are plenty loud enough for most venues

I wish I could agree with that, Pikey.  When the venue is empty, maybe true, but get a few people through the door, and let them have a beer or two, and IMO not only do you need PA for them to hear you, you need it for the band too.  And if the acoustics are poor (usually but not exclusively because of a high roof), your difficulties are multiplied.

I also don't put the caller through the foldback, like Anahata.

I can see that using personal sound equipment like the L1 must require the band to have a lot of discipline, sound understanding and self-awareness.  I've found that in every venue, I set up our mixer with  the same predetermined mix which we carefully developed in a hall, with no audience.  I try not to depart from that unless there's a strong reason.  It is so easy when the acoustics of a venue are awful for individual band members who can't hear themselves enough to panic and ask for more volume for themselves.  OK, you can turn them up in the foldback mix, but that often makes things worse overall, and then others panic too. 

The person on the desk probably understands these problems best, and I would worry about a danger of the band collectively losing control of their overall sound if everyone has their own volume control, as it were, on their L1.

I really really do wonder what happened before the advent of electricity
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Online Online
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Playing in a dance band
« Reply #13 on: July 19, 2014, 12:46:04 PM »

I really really do wonder what happened before the advent of electricity

People listened.

And the world was a better place, in some ways.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Playing in a dance band
« Reply #14 on: July 19, 2014, 01:33:10 PM »

I really really do wonder what happened before the advent of electricity

Same as in the old music halls - no mics in those days, and beyond the first 3 rows you couldn't hear a *%**%% thing......... ;)
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Playing in a dance band
« Reply #15 on: July 19, 2014, 01:45:43 PM »

When people say "no caller in *the* foldback" I understand why they have problems...

Foldback is there so the band can hear themselves and each other; yes it's not needed in small dead room where there's little sound coming back from the hall, but play in an echoey hall with delayed echo from the back wall (not uncommon for dances!) and it's a completely different kettle of fish. In this case you often can't hear the other musicians clearly at all, and your ears get confused between the direct sound and the delayed echo/reverb from the hall. Having decent foldback then makes a world of difference -- but having only one channel makes it difficult to keep everyone happy.

Without foldback in these circumstances callers often end up shouting because they can't hear themselves clearly over the echo/reverb, even though they probably sound out front, then this wrecks their voices. But if you put enough caller in the foldback to fix this it's far too loud for the other band members. Foldback volume needs to be loud enough to overcome the wash coming back from the hall, so too quiet is useless and the more echoey the hall is the louder it needs to be do do this -- but still nowhere near as loud as some festivals seem to think is normal when they're doing the mixing...

The only real fix is to have several channels of foldback (we use 4), which means a mixer that can do this and multiple separate monitors. This also means different musicians can have what they want in their monitor, depending on what they can hear directly on the stage and which instruments they need to/want to hear -- for example I never need any of Gordon's guitar since he's in front of me and I can hear it directly.

Once you have separate foldback channels, there are digital desks available now which allow each musician to control their own foldback mix (e.g. from an iPad or tablet PC), though they're still quite expensive and I haven't seen anybody on the folk scene using them. Anyway if you're using your own band's PA, once you've got everything set up once it's usually pretty much OK for every gig, with maybe just a few small level tweaks needed.

I've never tried the Bose-style "speakers behind the musician" and I can see many reasons why they wouldn't work for many bands, especially getting the right balance between instruments both on-stage and out front and in bigger venues, though some people seem happy with them.

Oh yes, backline amps should be as quiet as possible...
« Last Edit: July 19, 2014, 01:48:39 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Playing in a dance band
« Reply #16 on: July 19, 2014, 01:51:10 PM »

Need for PA does not just depend just on size of venue - it's about background noise. When you set up in an empty room you might think you don't need it, but let in a wedding or a student boat club dinner full of drunken rowdy guests with everybody shouting excitedly at each other and you need extra power to be heard over that.
Absolutely - I can play when I can't hear myself, but I can't play well. As I strive to produce more acoustic sound from the box, my playing gets coarser and less relaxed. YMMV.
Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Playing in a dance band
« Reply #17 on: July 19, 2014, 02:49:44 PM »

I can see in principle the benefits of separate foldback mixes for each player, and have certainly played in settings where that has been supplied. 

However I've found that a downside of that is that I want to hear what the whole sound is like out the front, so that as a player I can judge how loud to play at a given point, and if the mix I'm hearing is skewed, that becomes pretty difficult to do.  For example, say if you're playing at some point in harmony with another melody instrument, you want to achieve a finely balanced combination of the two musicians.  If you're lucky enough to have a regular and separate sound engineer, OK, they will probably know what each musician wants from time to time, but if not, I'm not sure separate mixes actually helps a lot in practice.  In fact, I think I'd go further - usually I'd really like the monitor balance between instruments to be much the same as the FoH balance, so that it's as close as possible to playing without PA.  Then each musician can hear and feel the relative balance, making for a really tight sound.  It's actually a disadvantage of boxes that they tend to be acoustically quite loud, which can lead to the situation where they are too quiet out front, without the player realising it.  This is where the 'preset' balance idea comes into its own, because it becomes a reference sound for an experienced band to try to play to.

However, I would accept that there are times when the sound is so muddy as a result of awful acoustics and noisy audiences, that it becomes necessary artificially to increase the monitor level of whatever instrument the band feels it relies upon as its rhythm reference, so that the timing doesn't actually collapse completely.

A compromise situation is where an instrument has no acoustic sound of its own, and in those cases a separate small personal amp to raise the volume (slightly) of that instrument for its player can help.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Playing in a dance band
« Reply #18 on: July 19, 2014, 03:30:31 PM »

Unfortunately, "wash" is a two way street; front of house coming back to the band plus foldback being heard out front. Sensible speaker positioning can help, of course, but a certain degree of compromise must sometimes be accepted. An apparently good on-stage sound may well be at the expense of the front of house quality; similarly, good front of house sound may be at the expense of poor fold back, resulting in a less polished performance from the musicians.

So maybe we must become a little more selective in the venues in which we play if we wish to become all things to all people....


Logged
Tuner/repairer, now retired.

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Re: Playing in a dance band
« Reply #19 on: July 19, 2014, 06:18:05 PM »

I have never heard the term "foldback" before. I take it that it is the sound you get from the monitors. I am not a professional sound person  In respect to what Anahata said, Bose systems are expensive for what you get. Feedback is not as big an issue as you would think using them.  The active speakers are at the very top of the tower and are actually over the heads of the musicians even when they are standing. I elevate my tower a little more than floor level which helps avoid feedback and broadcasts a bit better in my opinion. I have owned a number of systems and have had less problems with the Bose setup than any other. It is a compromise Like any other system. Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal