Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Queries  (Read 3212 times)

0 Members and 1 Guest are viewing this topic.

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Reed Queries
« on: July 19, 2014, 10:14:49 AM »

I'm experimenting with making harmonicas using accordion reeds, putting the twin-reed plates together on a mouth-blown comb I designed and made using my 3D printer.

I've made a couple of test harmonicas with reeds taken from an inexpensive Chinese-made Scarlatti concertina that I bought from Pip Ives for parts. They work well, and now I'm looking to buy individual reedplates in specific pitches without having to dismantle boxes to get them!

It seems Harmonikas of Louny (http://www.harmonikas.cz/en) are an excellent choice, and so are Cagnini reeds from CGM Musical. A couple of other options I'd like your opinions on:
 
1. Has anyone here bought Hohner accordion reeds from their online shop?:
http://www.hohner-cshop.de/en/Accordion/Parts-Accordion/Reed-Plates/T-Reed-Plates/
 
Lots of pitch and length options there, acceptable prices and I imagine the delivery is pretty swift. Hohner harmonicas are great, but what about their accordion reeds? Any experience with them?
 
2. The Chinese-made reeds I salvaged from the Scarlatti are pretty good. I'd love to know if it's possible to buy Chinese accordion reeds directly from the Chinese makers in single sets. Anyone know?

Any comments, suggestions welcome.

Cheers, Brendan Power
« Last Edit: July 20, 2014, 10:37:39 AM by BeePee »
Logged

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #1 on: July 19, 2014, 10:21:50 AM »

Here's another reed-related issue, regarding the way reeds are milled.

99% of harmonica reeds are milled horizontally (across their width). The companies mill a sheet of brass with a certain profile appropriate to the pitch, and then stamp reeds out of it. This leaves the reeds with microscopic milling marks across the width that can (and do) lead to stress cracks.

I assume accordion-type reeds are milled the same way - is that correct?

Ideally, it would be better to mill the profile longitudinally (along the length of the reed). It is done in one very high-end 4 octave chromatic harmonica made with tapered steel reeds, Franz Chmel's impressive NC-64:
 
http://www.chmel.at/...cification.html
 
http://www.chmel.at/...est-report.html
 
I haven't tried one, but his reports on the reed life are incredible. Machining the reeds longitudinally (along their length) is key, and something that virtually no other free reed manufacturer has done AFAIK. Do you know of any accordion reed maker that does this?

Any expert insights into how accordion reeds are made would be very welcome.
« Last Edit: July 20, 2014, 10:38:35 AM by BeePee »
Logged

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #2 on: July 19, 2014, 10:34:41 AM »

And another query...

Judging by the Scarlatti concertina from which I scavenged reeds (see first post in this thread), I noticed that some of the same pitches could come in long-slot or short-slot lengths. For making a harmonica the short-slot work better, as otherwise the comb is very wide!

On the Scarlatti, the long-slot reeds are on plates 44mm long, and the short-slot are on 37mm length plates. Of course there are even shorter plates for the very high octaves, but I'm hoping I can make harmonicas that start with the 37mm plates.

Looking at the Hohner site, their plates are pretty long for the pitch of the reeds:
http://www.hohner-cshop.de/en/Accordion/Parts-Accordion/Reed-Plates/T-Reed-Plates/

Do you know if there is any maker that is noted for shorter reed plates than others?
« Last Edit: July 19, 2014, 10:36:18 AM by BeePee »
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed Queries
« Reply #3 on: July 19, 2014, 10:53:18 AM »

Hi Brendan,
You are on a catch up session!

The subject of milling/grinding direction was considered recently, there was a good sized thread IIRC. 

And reed profile, too


What did you do with the rest of the Scarlatti? Looking for a fairly complete one, reeds and action optional.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Reed Queries
« Reply #4 on: July 19, 2014, 10:08:56 PM »

Myself and others have brought up the subject of milling marks on steel reeds before. There was a discussion I started in which I erroneously (more like casually) described as a grain, and comments added to other discussions that should be returned by a search of the archives. The verdict is that while it probably makes more sense for a factory to run the milling parallel with the length, it's probably not something anyone should lose sleep over.

There is a harmonica maker making single reeded harmonicas with steel reeds. I don't recall the name of the company but you can probably find it with a google search, or locate the thread with a search of my handle. I think it was in the Other Instruments subforum, about three or four years ago.

Good luck with the project. The harmonica seems like such a stable platform (i.e. hasn't changed dramatically in 100 years), innovation is always welcome.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Reed Queries
« Reply #5 on: July 19, 2014, 10:16:21 PM »

Brendan, here is one of the old discussions, I'll try to dig up the others. Cheers.

Chris
http://forum.melodeon.net/index.php?topic=7160.0;wap

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Reed Queries
« Reply #6 on: July 19, 2014, 10:22:22 PM »

Seydel may have been the company I was thinking of, making harmonicas fitted with individual steel tongues. I recalled a boutique mfgr but I can't seem yo locate him. You may be familiar with the Seydel Session Steel?

http://www.seydel1847.de/epages/Seydel1847.sf/en_GB/id=com.messefrankfurt.navigator.musikmesse&hl=en_GB/en_US/?ObjectPath=/Shops/Seydel/Products/10330/SubProducts/10330LC&ViewAction=IC_ViewExtrasDialog

Another link, this one to a relevant discussion on the Harp List..

http://www.harpl.com/199728257.html

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Reed Queries
« Reply #7 on: July 19, 2014, 10:41:04 PM »

You may be familiar with the Seydel Session Steel?
He should be.  (:)
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Reed Queries
« Reply #8 on: July 19, 2014, 11:12:21 PM »

Yes, Sebastian, being facetious.  ;D

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #9 on: July 20, 2014, 10:50:56 AM »

@ Christoper K: Thanks for the old thread on accordion reed machining.

Yes, I know Seydel well. They market harmonicas in a couple of my tunings:

http://www.seydel1847.de/epages/Seydel1847.sf/?ObjectPath=/Shops/Seydel/Categories/Products/Specialities/PowerTunings

They get their stainless steel reeds and reedplates made by the Czech maker Harmonikas of Louny, just over the border from Seydel's Klingenthal base in eastern Germany.
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Reed Queries
« Reply #10 on: July 20, 2014, 11:27:31 AM »

I'm curious, won't steel accordion reeds just go rusty?

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Queries
« Reply #11 on: July 20, 2014, 01:37:24 PM »

Dix reeds made by harmonikas are longitudinal. As a fellow experimentor I am looking forward to hearing more of your project!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #12 on: July 20, 2014, 08:10:50 PM »

@ Andrew: Yes, that's been the conventional wisdom for ever: you can't use spring steel reeds in harmonicas because they'll rust. But I don't believe it would be a serious concern if you let the harmonica fully dry after playing, before putting in a case or box. I guess the manufacturers can't take the chance, because a lot of players would not take the right care of steel-reeded harmonicas and the reeds would rust, and then they'd get complaints.
 
Condensation can and does cause rust in concertinas, melodeons and other bellows-blown boxes, so it's not a specifically harmonica issue. The reed makers put on a light anti-rust coating on the reeds. With some basic care (allowing to dry after playing) I believe steel reeds will not give any more trouble in harmonicas than they do in squeezeboxes. But I'll have to see how that works out in practice, as I'm only just starting this project.
Logged

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #13 on: July 20, 2014, 08:15:25 PM »

@ Ukebert: That's interesting about the Dix reeds. How do you know that - have you examined them under a microscope, or is it something Harmonikas claim?

There is a very high-end 4 octave chromatic harmonica made with steel reeds that are CNC milled longitudinally: Franz Chmel's impressive NC-64:
 
http://www.chmel.at/...cification.html
http://www.chmel.at/...est-report.html
 
I haven't tried one, but his reports on the reed life are incredible. Machining the reeds longitudinally (along their length) is key, and something that virtually no other manufacturer has done, in any kind of free reed instrument that I know of. So I'm curious to hear more detail on the Dix reeds.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed Queries
« Reply #14 on: July 21, 2014, 04:32:05 AM »

Not played harmonica in 35 years, but am curious. Is there any "advantage" to milling the reed metal across the plane of vibration ???
Logged
  _       _    _      _ 

BeePee

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Reed Queries
« Reply #15 on: July 22, 2014, 05:59:46 PM »

The only 'advantage' is that it's cheap and easy to do. One profile is milled out of a strip of reed material, and then the reeds are cut out of it. They all come out with the same profile. Milling longitudinally is much more time-consuming and difficult.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Queries
« Reply #16 on: July 30, 2014, 02:15:09 PM »

Harmonikas claim that Dix are milled longitudinally, which is why they are so expensive. More stuff here: http://forum.melodeon.net/index.php/topic,14469.msg178512.html#msg178512
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal