Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Accordion button tool  (Read 1709 times)

0 Members and 1 Guest are viewing this topic.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Accordion button tool
« on: July 19, 2014, 10:42:38 PM »

For many years I've been looking for the ideal tool to screw (and un-screw) accordion buttons. I find the one offered by Carini (3 jawed with a spring mechanism) most user unfriendly (useless, basically). Presently, I  use a modified pair of common pliers, with 2 specially shaped rounded jaws. I'm reasonably happy with it, it's quite fast and doesn't damage the buttons. But what I'd really like to have is a similar sort of pliers with 3 jaws, NO springs, just hand operated. Would anyone happen to know if such a thing (or any other smart tool!) exists or could be made?
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Accordion button tool
« Reply #1 on: July 19, 2014, 11:57:28 PM »

Would a 3 jaw hand held chuck do the job? What is the diameter of the buttons?

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Accordion button tool
« Reply #2 on: July 20, 2014, 12:02:48 AM »

It would be helpful to know the capacity desired for the pliers. Perhaps something along the lines of the vintage (and probably antique) draftsman"s lead holder could work, you could make it on a lathe. Its a 3 or 4 jaw collet type chuck that contracts when spring tension draws it into it's tapered barrel, and opens when pushed the opposite way against the spring. Having been a draftsman some decades ago, I can post a photo, if you wish..........F
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Accordion button tool
« Reply #3 on: July 20, 2014, 12:16:46 AM »

That's pretty much the Carini tool you've described there Forest.
I find the Carini tool ok, but I have taken it sort and taken off some rough edges. Now it doesn't damage the buttons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Accordion button tool
« Reply #4 on: July 20, 2014, 06:41:55 AM »

That's pretty much the Carini tool you've described there Forest.
I find the Carini tool ok, but I have taken it sort and taken off some rough edges. Now it doesn't damage the buttons.

Not familiar with the Carini tool. Glad I don't own one, it would be one more item I'd be misplacing and searching for.

  But for buttons around 15mm or so, how about the above concept made from a short section of bamboo tube reamed out to the correct diameter, slit vertically up the sides so it could expand and contract, with a sliding ring around the barrel to adjust to proper 'grip'. Lined with thin soft leather so as not to scratch the buttons...... ::)
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Accordion button tool
« Reply #5 on: July 20, 2014, 09:20:14 AM »

Very interesting and creative idea, Forrest! Thanks! 
« Last Edit: July 20, 2014, 09:26:17 AM by diatonix »
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Accordion button tool
« Reply #6 on: July 22, 2014, 02:15:25 PM »

I was thinking along similar lines, but if the inside were tapered, just a shallow angle cone, then it would increase its grip as you pressed down on the button.  Unless you are regularly changing all the buttons, I'm surprised anyone but a manufacturer would feel the need for a tool, surely they screw most of the way between the fingers, just needing leather lined pliers to nip up the final quarter turn?  No, actually looking at a keyboard it would be a pain to get at a button in amongst all the others...

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal