Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: new reed problem  (Read 1779 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
new reed problem
« on: July 26, 2014, 10:00:21 PM »

Had an odd problem come up with a new reed on an accordion I made. It happened to be my first "non Cajun" style box, with 4 bass buttons on the frame.  I made it, tuned it, and handed over to happy customer, thinking all had gone well on what was for me a venture into very new territory.  He soon called to say one of the bass reeds had a squeal when pulled hard.  I got the box back, and for 2 months I drove myself crazy trying to figure it out.  It ended up being the smaller reed of the G/D bass.  I couldn't see anything visually.  It was from a set of new A Mano Binci G reeds.  But no matter the reed gap, the pull "D" reed would choke off if pulled with much pressure, and sometimes if pulled very hard or with a quick bellows change, it would start with an annoying screech, then sound normally.  While messing with the reed gap, I noticed that the reed had very little spring to it, it would bend much easier than a new reed should.  I didn't notice this with any other reed in the set, which was odd in itself. 

Anyone ever see this?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: new reed problem
« Reply #1 on: July 27, 2014, 01:10:06 AM »

Sounds as if the reed tongue could be contacting the side of the reed plate slot intermittently, possibly combined with an incorrect reed tongue thickness. Have you checked that the reed tongue is not twisting on its rivet? Try centering the reed in the slot, then giving the rivet head a sharp couple of taps with a hammer, whist supporting the underneath of the reed plate on an anvil or similar. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: new reed problem
« Reply #2 on: July 27, 2014, 02:49:38 AM »

I checked all the normal stuff.  It is centered with good clearance.  Rivet is tight.  No valve or chamber contact.  Only thing I can find is the easy to bend reed.  It does the same in a tuning bellows for individual reeds. 

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: new reed problem
« Reply #3 on: July 27, 2014, 05:38:55 AM »

Not knowing the internal position of the offending reed, but maybe worth checking that the reed doesn't make contact with the bellows, especially if the player gives the bellows a bit of bend when playing. Struck this on a Dino Baffetti black pearl a while back, and more recently on a small piano accordion. In both cases, replacing the offending reed with one on a slightly thinner reedplate solved the problem; far simpler than rejigging the carpentry, which would have been my fallback option.
Logged
Tuner/repairer, now retired.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: new reed problem
« Reply #4 on: July 27, 2014, 06:23:02 AM »

I did, Malcolm, made sure it didn't hit the bellows or treble reed blocks. But, like I said, it sounded normally once started, it was only at startup.  And the new reed I replaced it with works fine.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: new reed problem
« Reply #5 on: July 27, 2014, 09:40:07 AM »

I did, Malcolm, made sure it didn't hit the bellows or treble reed blocks. But, like I said, it sounded normally once started, it was only at startup.  And the new reed I replaced it with works fine.
It must have been a duff reed then. Most unusual...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: new reed problem
« Reply #6 on: July 27, 2014, 09:56:14 AM »

If the bad sound is as the reed is starting then also suspect the valve, particularly the one beside the reed that should close when the reed sounds.   Is it free to open and close?  Does it lie perfectly flat?   But I agree that it does sound like a reed that should not have passed QC in the factory.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: new reed problem
« Reply #7 on: July 27, 2014, 05:41:31 PM »

Theo, when I hear oddball sounds, my very first suspect is usually the valve.  Didn't see anything visual, but replaced them just in case.  Even made a new reed block that was taller and with thinner sides to give more air flow and less chance of anything hitting the reed block side. 

The part I found most odd is how easy the reed is to bend.  But since these reeds come on big rolls, seems like if one is like that, a bunch of them would be.  Even the push reed is ok.  Very unusual for a handmade reed from a well known reed maker.

I ended up spending most of the time on the wrong thing.  I tune the bass side reeds by putting masking tape on the reeds I can't isolate.  When I put tape on the smaller bass reed to sound the large reed, I heard the screech, but didn't when I taped the big reed to sound the smaller one, making me think it was the big reed.  The problem there is the screech was intermittent, just happened not to do it that time. When taping off the smaller reed, I can tune the big reed, but if I pull hard, just enough air would get through a small gap in the tape to allow the screech.  What I should have clued in on was the screech was always accompanied by a stall, or choking of the reed.  It's not out of the ordinary to have a very large reed hesitate just a bit, but the smaller reed should be instant.  Again, the intermittent thing got me.  So spent 2 months fretting over that large reed, even replacing it, to no avail, at which time I was ready to admit myself to the funny farm.  When the choking off thing clicked, I had the problem solved in minutes.  Sighhhhh.....
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal