Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: A musing- Can/should Hohner start making NEW Liliputs/Precosias?  (Read 6540 times)

0 Members and 1 Guest are viewing this topic.

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account

    Having just bought a Liliput (I gave in to my MAD  >:E) it got me thinking- with the outsourcing of some (if not all) of Hohners manufacturing to China, why don't they start building new Liliputs and Precosias?       
    There is room for improvement on the old boxes, and many are 15/20 years shy of being a century old! For instance, instead of having to source PA's to fulfill extended 8+ bass ends, it could be manufactured and bought off the shelf with one already.
    I know there is an argument for 'character' of the old boxes; new Chinese ones would be of no comparison to the old ones...could be seen as a different breed perhaps?
    Just a musing, thoughts?

    P.S. Theo, I'm not entirely sure if this should go on this forum board or the 'general discussion' one, please move as you see fit.  ;)


    EDIT: See page 4 of this thread: http://forum.melodeon.net/index.php/topic,9792.60.html

    Unlocked now, sorry Admins, I am at work and got in a bit of a tiswas  :P
   
« Last Edit: July 30, 2014, 08:44:09 PM by EastAnglianTed »
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #1 on: July 30, 2014, 09:14:31 PM »

and while they are at it why not some new 3 voice trichords with 40 stradella bass

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

tekyinblack

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #2 on: July 30, 2014, 09:29:37 PM »

There must be a commercial decision in there somewhere, as to also why they don't compete head-on with the Italian and French makers.
From what I've seen, much of the manufacture uses the latest digital technology to design and make new boxes, something which I'm sure Germany industry could do without stretching itself, so sending work to China can only be to glean the last bit of profit out of it, something which building older, favourite boxes wouldn't allow.
Logged
Castagnari Sander D/G, Hohner Club III D/G, Hohner Liliput Eb/Bb, Hohner Club II C/F

EastAnglianTed

  • The wise wearer of the onesie
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
  • Castagnari Hascy-East Anglia for the win!
    • My Youtube account
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #3 on: July 30, 2014, 09:42:19 PM »

    Commisioned centenary versions of the boxes would be a great seller I think  ;) Great excuse to bang out some new ones  :P
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #4 on: July 31, 2014, 02:18:15 AM »

I've been looking inside my older boxes of late and it is interesting to note which "craftsman" features were eliminated over the years to save a few coppers in production costs.  It would certainly be simple enough to make a batch of Liliputs based on current build philosophy, though it would be better if they tuned them, unlike Chinese Pokerworks!  I doubt if anyone at Hohner is at all aware of how popular a rebuilt Liliput is - most manufacturers never look back and remain unaware of how their older products are preferred to the new unless they achieve true cult status.

It would be interesting to look to improve the Preciosa over the original.  There is so little space between the reed frames that waxing them in is a black art and indeed mine suffered a printer's pie - the central half a dozen reeds simply bursting out of the wax.  Surely going back to clamping the reeds onto leather as a seal would solve the problem, although I suppose all those screws would make the box a bit heavier?  It might suffice to modify only the flying reed pan as I suspect it flexes a bit with all that metal on it.  Perhaps the biggest update would be to increase its size a little to improve the internal design whilst getting the incredible tone and volume that the flat mounted reeds give. A Pokerwork hybrid would be interesting as it would enable the two and a half row arrangement in that size range and there's always been plenty of room to get a twelve bass into a Pokerwork, so you could get a modern 2.5 row in a small, light package with the Hohner sound.

Rob.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #5 on: July 31, 2014, 09:04:46 AM »

Before we raise expectations too high may I chip in that correspondence with Hohner during/after the (to my mind decisive) discussion of 4th button start for DG boxes didn't achieve anything

I've had a slightly belated email from Hohner Product manager Horst Fausel with regard to their current Erica and corso models

He attached their 'forever' 3rd start layout, and I both pointed Horst to the thread, and also emailed again once the forum had strongly favoured what we term the "Anahata" layout

I've emailed links to this and the previous threads to Pete McLelland (Hobgoblin), Jon Loomes (Music Room), Horst Fausel (Hohner)

Up to them now …

Got nothing back from either Hobgoblin or Hohner, and I don't think the latter have made any changes as a result of a big chunk of market research? I'd be delighted to be disabused in this respect …



{Rees later let us know that Castagnari boxes had moved to 4th (wish now I'd checked this out at Ch.d'Ars). My own new DG box some 18 months back came 4th, but that was bespoken}
Logged
  _       _    _      _ 

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #6 on: July 31, 2014, 10:28:05 AM »

Hohner is a taiwanese owned company today. I don't think they are interested in something which they consider as a "niche market" within a "niche market".

If you want newly build Preciosas and Lilliputs, you should try to convince a smaller maker (even if I don't think they will share your opinion). If this instruments catch on and become economically sucessfull, Hohner will eventually follow.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #7 on: July 31, 2014, 10:48:22 AM »

Sebastian, I think you are exactly right there. 

I'm always mildly amused when people who seem to have no experience of earning their living by making and selling a product, start explaining how easy it is for someone else to make something. ;)  How much more helpful it would be for a proposal to come in the form of:  "I think it would be great if there was a Hohner Lilliput type instrument available to buy new, so I'm going to build one. I'm working on the design and prototype now and I would value the input of some players ..."

Then we really could get somewhere!


That's not too controversial is it? (:)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #8 on: July 31, 2014, 10:59:37 AM »

I agree  -  it would be a major undertaking for this to happen and  for a commercial entity such as Hohner to want to do this there would need to be a big enough market to ensure a healthy return on their investment, something I just don't see, especially when you consider that as well as Liliputs/Preciosas being a niche market we here in melnet-land also appear to be rather a niche group among melodeon players.

I am reliably informed that many, many players simply buy a box (yes, just one) and play it without visiting this venerable forum or indeed concerning themselves with such knotty topics as 4th button layouts, air button placement or indeed even the consideration of how many straps should be on their melodeon in the first place  >:E

Strange, I know but I am assured 'tis true.

Either way I don't think we are about to see a bunch of shiny new models rolling off the Hohner production line any time soon so I guess it's back to E-Bay.de for them as wants one.


Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #9 on: July 31, 2014, 11:44:52 AM »

The problem with the Liliput/Preciosas is that they used miniature reeds (pros and cons about them). This meant that they could be minute boxes. I reckon that I could make a 2 row 2 voice significantly smaller than a pokerwork, but it wouldn't be an optimal way of building. Remember that the preference for meaty bass ends demands a reasonable cavity volume!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #10 on: July 31, 2014, 12:52:45 PM »

The problem with the Liliput/Preciosas is that they used miniature reeds (pros and cons about them). This meant that they could be minute boxes. I reckon that I could make a 2 row 2 voice significantly smaller than a pokerwork, but it wouldn't be an optimal way of building. Remember that the preference for meaty bass ends demands a reasonable cavity volume!

I'd say there's a call for an updated Preciosa; something with 2 reeds flat mounted via cunning engineering in the style of the bass chimney arrangement we've been discussing recently - these days with CAD, laser cutters and a bit of cunning, it should be easier to engineer something less prone to warping than the preciosa top reed pan. No need to use non standard reeds; I don't think the case has to be that small. But while I'm dreaming, please remember to add the pitch bending mechanism too, eh?  ;D

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #11 on: July 31, 2014, 03:02:53 PM »

I am probably going to get in trouble for asking this, but why would anyone want one? The fact is that if Hohner were to make a new Liliput, it would almost certainly be of lesser quality than the old ones.  Sure they COULD make an improved model, but the fact is that due their desire to "save a few coppers," this would almost certainly be a cheaply built Chinese box where the buttons start sticking after a few months.  The sound and action would be mushy, the bellows would be awkward, the air button would release air too slowly, and things would start breaking or falling off within the first year. Sorry Hohner lovers, but this is the reality.  That said, my Hohner Ouveture is one of the best made things I have ever held in my hands, but of course it was made when Hohner was still Hohner.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #12 on: July 31, 2014, 04:28:38 PM »

- these days with CAD, laser cutters and a bit of cunning, it should be easier to engineer something less prone to warping than the preciosa top reed pan. No need to use non standard reeds...

I'm not so sure that modern methods will solve the flying reed pan problem, I suspect that they warp as the great mass of metal expands and contracts beyond the capability of the wax - of course, I'm probably wrong and screwing to a leather gasket will just add weight and leak a bit!

Theo is right in that Hohner is not going to address any dream like those we express.  It wouldn't be a profitable enterprise at a realistic price.  Some of the ideas might interest someone like Mr Rowbotham though, should he have a client to fund it?

Rob.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #13 on: August 02, 2014, 11:24:45 PM »

I had a similar "why oh why" moment a while back when I bought my Hohner Cornelia ... and was quickly given the kind of information which really shows why these instruments are not made today!

Firstly, when these boxes were first produced, the Liliput was about twice the price of the pokerwork equivalents - and the Preciosa was 2.5 times the price.

At current Pokerwork RRP - that would mean a Liliput would be about £1400 and a Preciosa about £1750.

However ... it looks as if Hohner have been studying how to cut the price of making a box since the end of the '30s ... and the difference in construction quality would be noticeable ... in fact I don't think it would be possible with the Preciosa to cut as many corners as Hohner do with the modern pokerwork and still end up with a playable instrument ... so I suspect that the price would have to be substantially higher than £1750.

If you then look at the instrument I am playing converted from a 48 bass chromatic accordion model which was 6 times more expensive than a pokerwork .. the Hohner Cornelia would come in at least at a whopping £4200 ... probably more like £5k

People are not going to be willing to pay those kinds of prices for boxes in sufficient numbers to make it worthwhile for Hohner to seriously entertain the prospect.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #14 on: August 02, 2014, 11:27:19 PM »

That's right Squeezy, and even more so considering that there is a ready supply of used Liliputs and Preciosas.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #15 on: August 03, 2014, 01:38:08 AM »

A year or two ago, I was told that a Swiss accordion maker had made a run of "new" Liliput copies. I saw one offered on LeBonCoin at somewhere in excess of 2,000 euro. Not that I would buy one, but does any one have any information on these, just out of curiosity?
Logged
Tuner/repairer, now retired.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #16 on: August 03, 2014, 01:24:32 PM »

A year or two ago, I was told that a Swiss accordion maker had made a run of "new" Liliput copies.

Perhaps these ones? Not exactly Liliput copies but small two-voice instruments. http://www.akkordeonwerkstatt.ch/eigenbau.html Click Mediumörgelei

I was tempted a few years ago and corresponded with them but the price (in Swiss francs) was too high.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #17 on: August 03, 2014, 02:00:32 PM »

A year or two ago, I was told that a Swiss accordion maker had made a run of "new" Liliput copies.

Perhaps these ones? Not exactly Liliput copies but small two-voice instruments. http://www.akkordeonwerkstatt.ch/eigenbau.html Click Mediumörgelei

I was tempted a few years ago and corresponded with them but the price (in Swiss francs) was too high.

Thanks Steve, those look really interesting.  Do you know anyone who has bought one of the smaller ones?

PG
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #18 on: August 03, 2014, 02:25:29 PM »

Steve, thanks for the link, but the one that was on LeBonCoin bore little or no resemblance to anything on the page you linked to. Stupidly, I didn't save the photo or the page, but I recall it was a darkish red perloid, and the name clearly Liliput in upper case lettering, gold I think. As I recall, there was a very sparse description (fairly typical of LeBonCoin ads!!!)), but definitely fabrique en Suisse, and it looked very much like a standard Liliput set up. Certainly it looked new, gleaming chrome parts and black modern style bellows tape.

Of course, it could have been a very extensively renovated old one, but didn't give that impression.

« Last Edit: August 03, 2014, 02:27:50 PM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: A musing- Can/should Hohner start making NEW Liliputs/Precosias?
« Reply #19 on: August 04, 2014, 02:48:51 PM »

Hi Paul and Malcolm,

It was an off-chance that those might be the ones you saw. Untersee seem to build a huge variety of instruments, including concertinas, even multi-voice concertinas apparently, so they might be the boys (father and son) to reconstruct the Liliput as a special order. Might be worth asking them. But I'd not expect it to be cheap.

Below is my translation (not Google's!) of part of the correspondence I received in answer to my enquiry back in 2006. I asked about the Diaton (French) model and the little 2-v jobs. In fact I asked about making the inside row longer on the 21-button model in response to which they said they had already done this for an Irish-style player and promptly added the photo of the black "irisch" model to the web page, which is still there now.

They have two construction methods, "noble" and "simple" (they seem to have changed the name of the simple technique since 2006) and sent me pdfs IIRC explaining each method with the help of diagrams.

Quote
Diaton 23, 2-v (“noble” construction): CF [which I take to mean cassotto-flat] tuning is especially attractive in this instrument. This means that one medium voice is in the Cassotto (soft sound) and one medium voice lies flat, as in the concertina. This gives a very beautiful, strong tuning without tremolo. Price (ex works) SFr 3870.

Diaton 21, 2-v (simple construction): this instrument is built in a simpler manner and thus has tremolo. The treble buttons are somewhat smaller and closer together. With normal-sized buttons the same instrument has only 19 keys. A special feature is the leather bellows trim, which makes the bellows as supple as those of the concertina. Price (ex works) Sfr 2910.

No, Paul, I have never seen one of these boxes or heard of anyone who owns one. If I had, my reticence at the steep prices might have been overcome.

Edited to clarify "CF"
« Last Edit: August 04, 2014, 02:53:37 PM by Steve Jones »
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal