Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: conversion - MMM to LMM  (Read 1541 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
conversion - MMM to LMM
« on: August 02, 2014, 03:00:56 PM »

A friend of mine is thinking about converting his box from MMM to LMM, is this feesable ?  Its a v.soprani with no switches.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: conversion - MMM to LMM
« Reply #1 on: August 02, 2014, 03:03:30 PM »

Can be done.  L reeds are longer than M so a new reed block is probably the way to do it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: conversion - MMM to LMM
« Reply #2 on: August 02, 2014, 03:05:36 PM »

Its going to be expensive isnt it !
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: conversion - MMM to LMM
« Reply #3 on: August 02, 2014, 03:12:35 PM »

A friend of mine is thinking about converting his box from MMM to LMM, is this feesable ?  Its a v.soprani with no switches.
It's not just a matter of swapping a set of M reeds for some new L reeds. The L reeds are generally constructed on longer reed plates than the equivalent M reeds, so they would be too long for the existing reed block. So a new reed block would have to be made to accommodate the new L reeds. Even if this was done, the instrument would be permanently in LMM setting, unless further work was done to install sliders controlled by stops or switches, which would mean further modification of the proposed L reed block.

Overall, it's probably feasible, but it would probably be a time-consuming and expensive job. Your friend would be better off getting a box which was already set up as LMM.

Edit: I see Theo posted at the same time as me with a similar response.
« Last Edit: August 02, 2014, 03:14:25 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: conversion - MMM to LMM
« Reply #4 on: August 02, 2014, 03:27:03 PM »

Thanks guys
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: conversion - MMM to LMM
« Reply #5 on: August 02, 2014, 05:14:53 PM »

No don't do it I much prefer MMM boxes which are difficult to get is it BC?
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: conversion - MMM to LMM
« Reply #6 on: August 02, 2014, 05:17:51 PM »

I've come across many Italian MMM boxes (including Castagnaris!) where the block in the middle was actually designed to accomodate the (longer) L reeds. This was then overcome with extra pieces of wood and extra wax. I'm not familiar with your instrument, but should this be the case the conversion would be a lot easier and less expensive. But as has been hinted, a permanent LMM setting can easily get tiresome...
Logged

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: conversion - MMM to LMM
« Reply #7 on: August 02, 2014, 05:55:20 PM »

Its in DG, hes after a dartmoor sound with out buying a new box, but I suspect it would probably be cheaper
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: conversion - MMM to LMM
« Reply #8 on: August 02, 2014, 08:27:30 PM »

Hi all....

... Diatonix's comment is spot on and could mean an "L" set of reeds would fit with very little problem ....

.... But let's imagine there might indeed be a bespoke "M" centre reedblock ... In these cases it's actually pretty straightforward to extend a reedblock upwards, thereby extending all the chambers. I've done this on a number of instruments ...The advantages are many, you don't have to build an entire new reedblock - moreover you keep the original block+wood+exact fit with soundboard...

But that then leaves you with the dilemma Steve highlighted ... fixed LMM or slider and pullstop???

The space requirements for fitting a slider are a whole new ballgame... is there enough space between the appertures? between the rows? enough to allow effective sealing of the reedblock at the edges .... AAAaaargh! This is the REAL nightmare ... it's not the fitting of L reeds where M reeds used to be .... its fitting a pullstop-slider!

cheers!

Mike R

Logged

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: conversion - MMM to LMM
« Reply #9 on: August 02, 2014, 09:29:48 PM »

Im sure the player would not be worried, he has the box for keeps, and is yearning for the dartmoor grunt. The box needs an mot, and also ( if it were mine ) aconversion from 2 sets of low notes, to low notes and accidentals
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: conversion - MMM to LMM
« Reply #10 on: August 05, 2014, 12:28:21 AM »

Nick Collis Bird and me specified LM reeds for our DG boxes on the Pariselle course in May, and I can confirm that the L reed block is taller than the M block. Having made a couple I'd probably have a go at making one again, but the bottom plate, with square holes, would be the trickiest bit to get right, I think.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal