Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Thumb strap screw posts  (Read 3173 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Thumb strap screw posts
« on: August 03, 2014, 04:47:38 PM »

I was getting ready to replace a thumb [strap] on a HA-114 and I have a replacement with the rivets. The rivets looked a little long to me but probably would be fine.

Whilst visiting Tandy Leather in Houston TX I cam across these screw posts which work like a charm and are reusable! They were $4 for 10 pieces for the 1/4". I will be dying the thumbstrap black. I bought a remnant half cow for $29 and the leather is fantastic. I will also use thread lock when I put it back together although it is tight enough now. I did have to ream out the holes slightly.

Odd thing about trying to post this I cannot use the word [strap] without the square brackets in the body. It is fine in the subject?

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Thumb strap screw posts
« Reply #1 on: August 03, 2014, 07:14:52 PM »

I bought a remnant half cow for $29

I really felt this warranted a response. but words fail me.......... ???
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Thumb strap screw posts
« Reply #2 on: August 03, 2014, 08:52:42 PM »

I bought a remnant half cow for $29

I really felt this warranted a response. but words fail me.......... ???

Those were the very words that the salesperson used... I apologise to all the vegans  :|bl
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Thumb strap screw posts
« Reply #3 on: August 03, 2014, 09:37:41 PM »

I think, were this on Facebook, more than a little fun could be had. I actually understood what you meant, although I thought the half cow could be a bit thick. But cows are not notoriously bright anyway.

Tandy in the UK are expensive - on your items they just changed the $ to £, it seems.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Thumb strap screw posts
« Reply #4 on: August 03, 2014, 10:00:19 PM »

Tandy in the UK are expensive - on your items they just changed the $ to £, it seems.

Try Le Prevo Leather.   Fortunately for me their shop is in Newcastle but they have an up to date website and do mail order. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: Thumb strap screw posts
« Reply #5 on: June 17, 2015, 12:15:15 PM »

I was getting ready to replace a thumb [strap] on a HA-114 and I have a replacement with the rivets. The rivets looked a little long to me but probably would be fine.

Whilst visiting Tandy Leather in Houston TX I cam across these screw posts which work like a charm and are reusable! They were $4 for 10 pieces for the 1/4". I will be dying the thumbstrap black. I bought a remnant half cow for $29 and the leather is fantastic. I will also use thread lock when I put it back together although it is tight enough now. I did have to ream out the holes slightly.

Odd thing about trying to post this I cannot use the word [strap] without the square brackets in the body. It is fine in the subject?

Stephen

Thanks for the tip on the rivets and strap install.. great idea.

You say width is 1/4"  I would also like to know how long.??

thank
Johnniez
Logged
Every Day Is A Great Day
Some Are Better Than Others

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Thumb strap screw posts
« Reply #6 on: June 17, 2015, 07:09:12 PM »

In the URL on the OP (http://www.tandyleather.com/en-usd/search/searchresults/1290-04.aspx) it states:

1/4" (0,6 cm) long post, 1/4" (0,6 cm) long screw. Great for cases, straps and more. Threaded post (thread size 8-32) lets you open and reattach pieces when needed.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: Thumb strap screw posts
« Reply #7 on: June 17, 2015, 09:07:58 PM »

 So your saying that it is  1/4 width  and 1/4 inch long..is that right?

I am not metric educated but I take that .6cm is = 1/4 inch is that right or close to 1/4'' is that right?

So I am guessing the HA-114 where that rivet is suppose to go is quite thin... Is that right ?

Johnniez
« Last Edit: June 17, 2015, 09:09:58 PM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Thumb strap screw posts
« Reply #8 on: June 18, 2015, 07:37:53 AM »

Those screw posts are also bookbinders/stationers items. They are used for anything that needs pages removed like albums. They are cheap and come in brass or silver colour.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: Thumb strap screw posts
« Reply #9 on: June 18, 2015, 10:27:10 AM »

This is good to know. The nut and bolt on my G HA114 has been wearing my thumb away for ages. When I needed a piece of leather for a thumb strap I called in at a local leather worker who was in the middle of making an S&M gimp mask......he explained that it wasn't what he expected to be making when he set up shop, but he had to pay the bills! My thumb strap is an off-cut from that. He also regularly did leather cowboy gear for people who like to dress as, er, leather cowboys, holsters for other UK-based cowboys and a nice line in hand tooled sporrans.

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Thumb strap screw posts
« Reply #10 on: June 19, 2015, 05:22:55 PM »

I usually use a couple of "T" nuts (remove the prongs if you cant find the ones that are smooth) and glue them in from the inside of the keyboard. You now have threaded holes for your thumb strap. If you grind the T nut down you can make it so the threaded part is flush on the outside.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Mike-T

  • Good talker
  • **
  • Offline Offline
  • Posts: 90
  • 1930s Hohner B C C#, D/GAcc Benny, 2.5 Beltuna
Re: Thumb strap screw posts
« Reply #11 on: June 19, 2015, 08:30:08 PM »

They are also known as Chicago screws, a search on ebay uk will turn up several sellers, quite reasonably priced as well.
Logged

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: Thumb strap screw posts
« Reply #12 on: June 20, 2015, 12:44:20 AM »

I usually use a couple of "T" nuts (remove the prongs if you cant find the ones that are smooth) and glue them in from the inside of the keyboard. You now have threaded holes for your thumb strap. If you grind the T nut down you can make it so the threaded part is flush on the outside.

Is the frame of the 411 made of wood or plastic that part that you screw the mount on to. I see the rivets go in plastic. Just not sure about the frame. Never had mine apart., yet !!

tnx
Johnniez
« Last Edit: June 20, 2015, 12:49:48 AM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal