Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Life expectancy of Hohner plastic valves?  (Read 3675 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Life expectancy of Hohner plastic valves?
« on: August 25, 2014, 05:22:45 PM »

I have acquired an early-ish G/C Erica with the flat edged grille and wooden fingerboard. It has original looking Hohner plastic valves.
I believe these boxes to be 60s or so.

So would be appropriate to change the valves? Do the plastic ones go on for ever?

One has come adrift, and one or two of the lower reeds are sounding a bit flatulent so will be done anyway. But is changing the others necessary? or just a good idea? or an unnecessary waste of time?

Cheers

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Life expectancy of Hohner plastic valves?
« Reply #1 on: August 25, 2014, 05:48:28 PM »

Plastic (vinyl) valves can last for many years. So long as they are lying flat, the various component leaves are not creased or otherwise damaged, there is normally no need to change them.

Having said that, it sometimes happens that a rogue valve (which otherwise looks to be OK) will be the reason for a reed's poor or buzzy response. If you've eliminated other reasons first, try replacing the valve. It can (for no obviously apparent reason) make all the difference.

On larger reeds, plastic valves can be a bit noisy when they close, causing an audible click. They can also be a bit raspy on bellows direction changes. To avoid this it's better to fit leather or synthetic leather ('vileda') valves on the larger reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Life expectancy of Hohner plastic valves?
« Reply #2 on: August 25, 2014, 06:08:47 PM »

The basses are two-part synthetic and are perfectly flat.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Life expectancy of Hohner plastic valves?
« Reply #3 on: August 25, 2014, 06:10:28 PM »

Plastic valves seem to last  a very long time.  As Steve says yet can suffer mechanical damage and then they should be replaced. Regular exposure to tobacco smoke can mean a sticky deposit to build up which can lead to valves stuck down.  But with Hohber valves the end usually comes when the glue fails that hold the valves in place. If you find an old box with some valves detached it's often best to replace them all.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Life expectancy of Hohner plastic valves?
« Reply #4 on: August 25, 2014, 06:41:07 PM »

Thanks, will investigate further when I'm next in there.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Life expectancy of Hohner plastic valves?
« Reply #5 on: August 26, 2014, 10:08:17 PM »

Quote
On larger reeds, plastic valves can be a bit noisy when they close, causing an audible click. They can also be a bit raspy on bellows direction changes. To avoid this it's better to fit leather or synthetic leather ('vileda') valves on the larger reeds.

What would be the approximate reed size above which leather would be beneficial ?
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Life expectancy of Hohner plastic valves?
« Reply #6 on: August 26, 2014, 10:26:28 PM »

This rather assumes that leather would last longer? I find it goes stiff. And would it seal properly?

The bagpipe community incidentally have long since moved to synthetics for their reeds and such I understand a certain brand of yoghurt pot has just the right properties …
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Life expectancy of Hohner plastic valves?
« Reply #7 on: August 26, 2014, 10:34:30 PM »

The bagpipe community incidentally have long since moved to synthetics for their reeds

"The" bagpipe community?  Cane is still the material of choice for NSP chanter reeds. 

Leather reed valves still have their advantages too, even if they only have a useful life of a decade or two.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Life expectancy of Hohner plastic valves?
« Reply #8 on: August 26, 2014, 10:42:01 PM »

assuming NSP is the small pipes - aren't those single flap. I was thinking of the more common bivalve reeds. They started with oboe like wood ones, but they were quite hard to keep stable. Most of the makers I know switched in the 90's, Jon Swain leading the way.
Logged
  _       _    _      _ 

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Life expectancy of Hohner plastic valves?
« Reply #9 on: August 27, 2014, 12:44:51 AM »

assuming NSP is the small pipes - aren't those single flap. I was thinking of the more common bivalve reeds. They started with oboe like wood ones, but they were quite hard to keep stable. Most of the makers I know switched in the 90's, Jon Swain leading the way.
NSP = Northumbrian Small Pipes.
The chanter reed is a double reed, not as narrow as an oboe reed, more like a bassoon reed but a bit shorter. The drone reeds are single reeds, made either from a narrow diameter cylinder of cane with an integral sliced blade, or else a single separate blade of cane  bound at one end with twine to a body like a miniature cylindrical clarinet mouthpiece made from brass or bone.

I've tried making both types of NSP reeds from yogurt pot plastic, but the results were horrible (raucous and unstable) and I now stick to cane. The skill is in getting the correct shaved and tapered profile to the reed blades and the wire bridle adjusted just right, but once these are set, the reeds are quite stable in pitch. For drone reeds I use discarded (but unused) clarinet reeds cut and shaved down into suitably sized slivers. As the NSP are bellows-blown, there is normally little deterioration in the reeds from moisture. So long as one avoids accidental damage due to careless handling/assembling/disassembling, both chanter and drone reeds can last for many years.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Life expectancy of Hohner plastic valves?
« Reply #10 on: August 27, 2014, 12:59:04 AM »

Pill bottles, the ones with the child proof tops, are good for making pipe reeds. All sorts of different wood have been used for reeds, in fact anything that will vibrate. An old method was to make them from Elder. That said, Spanish cane (Arundo donax) takes a lot of beating for longevity and tonal quality. For drone reeds, wooden tubes fitted with plastic (mylar?) tongues can sound as good as cane. As for free reed valves, my PA box has earned its retirement over the last 40 odd years with the same set of plastic valves which still seem to be in fairly good condition. Must be good glue as none have fallen off.  Can plastic sound as good as leather/ cane??
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Life expectancy of Hohner plastic valves?
« Reply #11 on: August 27, 2014, 12:59:29 AM »

Quote
On larger reeds, plastic valves can be a bit noisy when they close, causing an audible click. They can also be a bit raspy on bellows direction changes. To avoid this it's better to fit leather or synthetic leather ('vileda') valves on the larger reeds.

What would be the approximate reed size above which leather would be beneficial ?
On a D/G box just the lowest pitched two or three reed plates on the treble side, say D4/E4 and below, are best valved with leather or vileda. The rest can be vinyl. On the LH side, the bass reeds need to be valved with leather or vileda, as do the the lower pitched component chord reeds. The smallest (highest pitched) component chord reeds can usually be satisfactorily valved with vinyl.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Life expectancy of Hohner plastic valves?
« Reply #12 on: August 27, 2014, 01:04:05 AM »

All sorts of different wood have been used for reeds, in fact anything that will vibrate...
I seem to recall that one of the famous Northumbrian pipers (Tom Clough? Billy Pigg?) reputedly used the sides of an old-style wooden match box, but I'm not sure how true this is.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Life expectancy of Hohner plastic valves?
« Reply #13 on: August 27, 2014, 01:25:38 AM »

Ahh! What some of those bar room musos could do with a wooden matchbox, an elastic band and a spent match, LOL.
The story must be true, they always are  ;D
Logged

Roger Howard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 606
Re: Life expectancy of Hohner plastic valves?
« Reply #14 on: August 27, 2014, 06:59:05 AM »

assuming NSP is the small pipes - aren't those single flap. I was thinking of the more common bivalve reeds. They started with oboe like wood ones, but they were quite hard to keep stable. Most of the makers I know switched in the 90's, Jon Swain leading the way.
NSP = Northumbrian Small Pipes. ...
So long as one avoids accidental damage due to careless handling/assembling/disassembling, both chanter and drone reeds can last for many years.

I can confirm this from hard experience, having damaged a chanter reed in just this way when I first had a set of pipes. The reeds in my current set are original, and perfectly stable after nearly ten years. I resist the temptation to tinker, and leave them alone.

On the other hand, Francis Wood can make you a whole set of pipes out of next to nothing  ;) - https://www.youtube.com/watch?v=eVNhQHq2E1E

Roger
« Last Edit: August 27, 2014, 09:38:09 AM by Roger Howard »
Logged
G/C Gaillard 2 row, 3 voice, D/G Lilly, D/G Pariselle 2.6 row, Preciosa Bb/Eb.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Life expectancy of Hohner plastic valves?
« Reply #15 on: August 27, 2014, 09:27:12 AM »

A fella at 1990's St chartier made all manner of playable "instruments" from stuff pulled out of the waste bins, plastic drink straws and bags particularly in evidence. Don't "think" he used cane for the reeds ::) but yes, NSPs are special in many ways. But when Mrs Ryall's Goodacre pipes wouldn't play she was told … to take a yoghurt pot to Glastonbury ;)

btw Anyone interested in rising stars, should watch for Callum Armstrong who won the Bagpipe competiton there this summer  Dave Faulkner only got 2nd «oui zhall award no premier zis year»; Cutting/Eaton were disqualified)! He played the socks of the rest, did things with NSP you couldn't imagine

[ed] re Roger below. Ahah! That makes the impossible …possible ::)
« Last Edit: August 27, 2014, 10:16:26 AM by Chris Ryall »
Logged
  _       _    _      _ 

Roger Howard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 606
Re: Life expectancy of Hohner plastic valves?
« Reply #16 on: August 27, 2014, 09:46:46 AM »

btw Anyone interested in rising stars, should watch for Callum Armstrong who won the Bagpipe competiton there this summer  ... He played the socks of the rest, did things with NSP you couldn't imagine

The variety of bagpipes is about as great as that of squeezeboxes, but I think that Callum Armstrong plays an unusual kind of Scottish small pipes; not at all the same as the NSP, which have a closed chanter.

See, for example, this from the LBPS website: http://lbps.net/lbps/index.php/31-general/general/260-callum-armstrong-plays-the-double-chanter-scottish-smallpipes.html.

Apologies for increasing the thread drift. ::)

Roger
Logged
G/C Gaillard 2 row, 3 voice, D/G Lilly, D/G Pariselle 2.6 row, Preciosa Bb/Eb.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Life expectancy of Hohner plastic valves?
« Reply #17 on: September 04, 2014, 07:24:22 AM »

And back to accordions...
I have found the synthetic leather on the larger hohner valves can become very stiff with age ,and can affect the sound.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Life expectancy of Hohner plastic valves?
« Reply #18 on: September 04, 2014, 08:57:52 AM »

And back to accordions...
I have found the synthetic leather on the larger hohner valves can become very stiff with age ,and can affect the sound.
That's interesting to know. Based on your experience, have you any general idea of an approximate lifespan for the larger synthetic leather valves? Do you think ambient conditions (e.g. temperature, humidity) can affect the lifespan?

Also, real leather valves can become curled and stiff with age too, so I guess there is no such thing as 'the perfect valve'; they will all need to be replaced at some stage.

Thanks,
Steve
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal