Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5 6   Go Down

Author Topic: Microphones for boxes  (Read 22978 times)

0 Members and 1 Guest are viewing this topic.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Microphones for boxes
« Reply #20 on: August 27, 2014, 09:34:01 AM »

I also use the AKG C516

http://www.akg.com/C516+ML-832.html?pid=974

The mounts on this are far more robust than the 416 which it replaces, which were always breaking.  The old design for B29 battery case used to have a jack socket, but the newer ones are XLR, or I believe you can get a phantom power adaptor.

With on-board mics the difficult question is how to attach them.  On the bass end there is a nice big strap which mics can be clipped to, but the treble end is more difficult.  My Nuage was already so battered that I decided I didn't mind permanently screwing the mounting plate onto the front of the instrument, and as both it and the melodeon are black this isn't visually obtrusive.  However I can understand why people are reluctant to do this to a newer box!  Sticky Velcro leaves marks after too long.  I haven't had the problem with AKG 'putty' which Steve mentions but I've always removed it immediately after use.  John Spiers says he uses magnets, and has experimented with Lego:

http://forums.spiersandboden.com/index.php?topic=1174.0

Another option is to attach the mic to the player.  I've usually only seen this done for the bass end, but I can't think why it couldn't work for the treble. Clipping it to a sweatband, as already mentioned, is one way.  Edwin Beasant used something made (I think) from an archer's arm brace.

If your instrument has straps to hold the bellows closed which also clip down in the 'open' position then it might be possible to clip a mic to this.



Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Microphones for boxes
« Reply #21 on: August 27, 2014, 11:14:07 AM »

When playing my Oakwood only, for many years I have a Shure SM57 on a stand for the treble end and a Microvox mic built in to the bass end, with a home made battery box/mix mixer providing a single feed to the mixer.

Recently I've purchased a couple of Thomann CC75 clip on mics, after a recommendation from Matt Crum. I attach them using heavy duty Velcro pads Microvox-style (also Matt's suggestion) to reduce mechanical noise reaching the mics. The intention was to use the same for a 1-row box by swapping them over from one box to the other. It works fine on the Oakwood, but the 1 row doesn't have enough surface area for the Velcro and the LF mic wobbled alarmingly while I was playing, though it didn't actually fall off.

So now, if I'm likely to use more than one box (depends on which band) I put up two SM57s and they work fine, but I'm sitting down to play - I'm not sure that would be so good if I stood up and was likely to move around a bit more.

For anything with someone else providing the PA, it's always two mics on short boom stands.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones for boxes
« Reply #22 on: August 27, 2014, 12:13:31 PM »

Quote
But using a stand mic for the left hand would scarcely improve matters on that front unless the player has enough spare headspace to adjust the box's positioning dependent on the basses being used at a given moment.

I think this really merits a separate thread,  and I'm not really sure what you mean by 'headspace', but I think that's the point - if you have a narrow cone of roughly equivalent microphone sensitivity on the free-standing microphone, and it's positioned about 30-50cm away from the bass end, but positioned in front of the box towards the middle of the bass end and pointing away from the monitor, then the difference in distance from the separate sound sources is not too significant.  But on the other hand, if you are trying to use a close mike either say 5 cm or 10 cm from different sound sources, and with different sensitivities in different directions, then the difference becomes really quite noticeable.  Of course, many people seem to like that effect, but it's not very 'natural', IMO.  ('Natural' meaning simply an amplified version of what the audience would hear acoustically.) 
Logged

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Microphones for boxes
« Reply #23 on: August 27, 2014, 12:49:32 PM »

Hi kati, you know Marc sohngen, right? He uses a wireless system in his RING. In theory perfect as the mic moves along with your hand. He is quite happy with it,
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Microphones for boxes
« Reply #24 on: August 27, 2014, 12:53:00 PM »

Hi kati, you know Marc sohngen, right? He uses a wireless system in his RING. In theory perfect as the mic moves along with your hand. He is quite happy with it,
W

That's very interesting. A friend and I have been designing something very similar. I'd be very interested to know some more details, if anyone has them!
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones for boxes
« Reply #25 on: August 27, 2014, 12:59:26 PM »

Speaking with my sound engineer hat on as well as musician, I'd recommend a good-quality mic on a stand for the treble end, positioned about a foot away, preferably with a hypercardioid pattern (anyone selling them should know what this means -- less background noise and feedback from foldback). You can also back away from it between tunes when somebody asks you "how does that tune go?"

Unless you don't really want to hear the bass end (many players don't) I wouldn't advise a stand mic for the bass end because it often moves around too much (unless you play without moving and don't move the bellows very much), making the level vary as the bellows move; to prevent this you have to position it further away which makes it prone to (usually low-frequency) feedback, which you can't get rid of by cutting the bass for obvious reasons.

If you don't want to add any kind of fixing to each box I'd suggest one of the clip-on gooseneck mics with a big fat clip which you can just fasten onto the bottom end of the bass strap, pointing towards the bass end sound holes from at least 15cm away. The pickup across all notes may not be quite as even as a stand mic, but this is much less of a problem than varying volume as the bellows and/or player move around.
« Last Edit: August 27, 2014, 01:02:29 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Microphones for boxes
« Reply #26 on: August 27, 2014, 01:02:42 PM »

Re wireless mic in ring - is it something like THIS ?

It needs two fingers, so maybe not ideal for a melodeon.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones for boxes
« Reply #27 on: August 27, 2014, 01:03:51 PM »

Can I also just illustrate something about 'proximity effects' with a simple experiment?  I've attached a recorded file I've just done.  (I had to truncate it to get it to fit on the forum.)

I recorded a pull bass and chord with thirds, from my Saltarelle Tramontane box, in three positions.  I used my Zoom H2, taking care to avoid overload.  In the first the (nearest) recorder mike was about 2cm from the relevant holes in the bass plate.  In the second, about 20cm, and in the third, about 50cm.  I then 'normalised' the three volume levels using Goldwave, so that they all sounded much the same level (as the sound engineer would do).  The difference in sound between the three positions is plainly noticeable, to anyone, I would suggest.

The point here is that if you are close to the sound source, you get much more bass.  If you are some distance away, it sounds much more like what an audience will hear.  A sound engineer may be able to compensate with equalisation, assuming he/she understands the issue, and the player's needs.

Some people really relish the added bass, and use it in a stage situation to great effect.  I hear many top players doing just that. But other players actually want to reproduce on stage the traditional live sound of a box to the audience's ears more faithfully.

What worries me mostly however is that an awful lot of people think the sound is all down to the microphone 'quality' alone, and all you need to do is to pay enough cash up front and it will all be sorted.  Sorry, but there's an awful lot of physics to know about here, first!  (PS, I wasn't including you in that comment, Ian, I see you've just posted while I was writing. Microphone quality is certainly important, but I'm sure we both agree there's a whole lot more to it.)

And perhaps the worst difficulty is that since a box makes plenty of acoustic noise, the player on-stage just hears that, and remains blissfully unaware of how the sound coming out the front is so completely different from what his or her ears would suggest.

« Last Edit: August 27, 2014, 01:25:51 PM by Chris Brimley »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones for boxes
« Reply #28 on: August 27, 2014, 01:30:41 PM »

Chris, proximity effect ("bass tip-up") is well-known for any directional microphone, and it's usually negligible once you're about 15cm away depending on the size of the diaphragm. It's one reason I said that a clip-on mic should really have a long enough gooseneck to get it this far away, it certainly shouldn't be much closer than this.

Even ignoring this, any close mic -- which category all these fall into, even a mic on a stand -- doesn't pick up the same sound as a listener a couple of metres away, the sound engineer needs to apply some EQ (usually treble cut) to get a natural sound -- try listening to your box being played with your ear directly opposite and close to the treble grille if you don't know what I mean.

When recording in a quiet studio I always use condenser mics on stands maybe a meter away for the ultimate quality, but if you did this on stage feedback would be a nightmare, especially if you're playing with a loud band in a venue with foldback. I've found the best compromise distance between sound quality, even pickup and feedback resistance is about 20-25cm away, depending how big and loud the instrument is.

Speaking from experience, a bass end mic on a stand with a player who moves the bass end around and uses a lot of bellows movement is a sound engineer's nightmare, and usually results in the bass end volume being turned down so the loud bits are OK but the quiet bits are too quiet. Which is fine if you don't use the bass end much or care about what it sounds like; I do, other people may not be so bothered.

If the sound coming out front is totally different from the acoustic instrument sound, the sound engineer should be taken outside and shot ;-)
« Last Edit: August 27, 2014, 01:34:30 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones for boxes
« Reply #29 on: August 27, 2014, 01:37:06 PM »

Ian, I'm going to PM you, because I don't want to drift from this very useful thread.
Logged

Katie Howson

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 164
Re: Microphones for boxes
« Reply #30 on: August 27, 2014, 01:44:40 PM »

Some interesting stuff here - I had wondered about magnets, so might speak to Squeezy about that, unless he spots this thread and joins us. I'll also contact Mark Sohngen and ask him about his system - I'll let you know. When I stand up to play I like to move about a bit, so definitely don't want a stand on either end. Interesting update on the AKG goose-necks and associated stuff - thanks Howard etc.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones for boxes
« Reply #31 on: August 27, 2014, 05:27:47 PM »

Some interesting stuff here - I had wondered about magnets, so might speak to Squeezy about that, unless he spots this thread and joins us. I'll also contact Mark Sohngen and ask him about his system - I'll let you know. When I stand up to play I like to move about a bit, so definitely don't want a stand on either end. Interesting update on the AKG goose-necks and associated stuff - thanks Howard etc.

If you move around like that I'd say you definitely want gooseneck (not too short!) clip-ons, with an attachment that lets you swap them between boxes easily.

If you're going to go down this path, *don't* do what I've seen some people do and mount them on the front pointing at the middle of the grille, you end up with the top and bottom notes being much quieter than the ones in the middle and there's nothing the poor guy on the sound desk can do to fix this.

Make sure the mics are directional, mount them on the top face of the box, and use the fact that sounds off-axis are quieter to fix the uneven response problem by positioning the mic about 5"-6" (about half the height of the box) out from the top edge of the box but pointing at the highest-pitched reeds at the bottom edge. The lower reeds are closer to the mic but the mic picks them up less strongly, the high reeds are further away but the mic picks them up more strongly.

To set up the mic position feed this into one channel of closed-back headphones, feed a stand mic 1m away into the other channel, and adjust the mic position until the volume in both channels up and down the keyboard is as similar as possible (or check on level meters on the desk). Once you've done this, remember where it was and where it was pointing and put it back there when you use it. Do the same for the bass end and you're laughing.

For this to work the mic needs a long enough gooseneck to get it far enough out from the mounting clip/velcro/magnet, and to be attached so that it picks up at right-angles to the gooseneck not end-on -- some mics are like this, others are either too short or the pickup direction is wrong so look before you buy. Also make sure they have (or can have) foam windshields fitted, not just for playing on outdoor stages but to prevent nasty rumbling noises when you use the air button quickly...

And don't then forget that comments to other band members on stage between tunes will come out loud and clear through the PA -- hypercardioid mics help for this (if you can find them) but are a bit more tricky to position correctly because the pickup pattern is narrower.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones for boxes
« Reply #32 on: August 27, 2014, 05:34:50 PM »

SM 57...he said as if he knew what he was talking about.... :|glug
It's a industry standard that everyone is familiar with but there are better mics for instruments (e.g. AKG C1000 S) -- and better ones than the SM58 for voice, come to that...

(but often for more money)
« Last Edit: August 27, 2014, 06:41:06 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones for boxes
« Reply #33 on: August 27, 2014, 06:06:46 PM »

I agree with almost entirely everything Ian has said - personally I find directional free-standers more realistic and easier because of the problems he explains, but then I deliberately don't move around much, partly in order to achieve that. 

I think we are in unison in saying that close-miking either end has real pitfalls if you don't realise what you're doing - it's not just an easy way of overcoming free-stander issues.
Logged

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Microphones for boxes
« Reply #34 on: August 27, 2014, 07:35:40 PM »

Hi kati, you know Marc sohngen, right? He uses a wireless system in his RING. In theory perfect as the mic moves along with your hand. He is quite happy with it,
W

That's very interesting. A friend and I have been designing something very similar. I'd be very interested to know some more details, if anyone has them!

I suppose he has them ;-). I bet hedoesnt mind sharing the info if you ask him. His contact is pobably on the net somewhere :-)
But if you cant find it, tell me, i can rpobably find it somewhere,
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Microphones for boxes
« Reply #35 on: August 27, 2014, 07:38:29 PM »

Re wireless mic in ring - is it something like THIS ?

It needs two fingers, so maybe not ideal for a melodeon.

I dont think it is, i have never payed much attention, as he mentioned the price to me at some point. At that time i wasnt willing to invest so much.
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microphones for boxes
« Reply #36 on: August 28, 2014, 12:59:45 PM »

Re wireless mic in ring - is it something like THIS ?

It needs two fingers, so maybe not ideal for a melodeon.

I dont think it is, i have never payed much attention, as he mentioned the price to me at some point. At that time i wasnt willing to invest so much.
W

Sounds cool -- but I can't find any reference to a wireless finger ring mic, only a wired one like this:

http://www.gearslutz.com/board/geekslutz-forum/261753-weird-novelty-ring-microphone.html

Given that a wireless one would have to include a battery with reasonable life, it would be quite a feat of miniaturisation...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Microphones for boxes
« Reply #37 on: August 28, 2014, 01:21:36 PM »

Given that a wireless one would have to include a battery with reasonable life, it would be quite a feat of miniaturisation...

I think they are calling the one I linked to anyway a "wireless" system because the mic comes with a wireless transmitter in a belt pack.

So no fancy miniaturisation, but you can wander around while playing, and the added advantage compared with a clip on mic connected to a wireless belt pack that you can put your instrument down and walk away without having to remember to unplug anything.

So for many practical purposes, it's "wireless".
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones for boxes
« Reply #38 on: August 28, 2014, 01:54:38 PM »

Quote
you can put your instrument down and walk away without having to remember to unplug anything

As long as you don't go anywhere near any loudspeakers, or turn it the wrong way, perhaps?
Logged

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: Microphones for boxes
« Reply #39 on: August 28, 2014, 03:39:07 PM »

Quote
you can put your instrument down and walk away without having to remember to unplug anything

As long as you don't go anywhere near any loudspeakers, or turn it the wrong way, perhaps?

I should ask him again...but since the mic moves along with your finger, can't it be very specific in what it feedbacks on?
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl
Pages: 1 [2] 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal