Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacing bass feet.  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Replacing bass feet.
« on: September 11, 2014, 11:26:41 AM »

I want to replace the nasty chrome feet on my Beltuna, with some nice turned olive wood ones, I bought from CGM.
My instinct is, to do what I do when I am making picnic tables. if I drill a hole by mistake, I whittle a spike of wood, knock it in tight, cut it off with side cutters, then sand it down.
Will this method be adequate for this job, or is there a better way to do it?

John

Sorry, should explain that the existing holes are too big to match with the new feet, and quite deep.  J
« Last Edit: September 11, 2014, 11:28:45 AM by Cugiok »
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Replacing bass feet.
« Reply #1 on: September 11, 2014, 11:30:04 AM »

The idea sounds a good one to me. Though I've never tried it.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Replacing bass feet.
« Reply #2 on: September 11, 2014, 11:58:46 AM »

In addition, smear the spike with wood glue when you knock it in. Drill pilot holes for the new screws.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing bass feet.
« Reply #3 on: September 11, 2014, 12:22:19 PM »

And wax the screws before driving them in.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing bass feet.
« Reply #4 on: September 11, 2014, 01:30:25 PM »

All of the above.  Superglue in place if wood glue if you are in a hurry.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Replacing bass feet.
« Reply #5 on: September 12, 2014, 07:01:07 AM »

.
   and keep the old feet ... just in case  ;)
Logged
  _       _    _      _ 
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal