Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?  (Read 3414 times)

0 Members and 1 Guest are viewing this topic.

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614

Hello all, is at all possible to convert Horner’s HA  112-113-114 series from spoon bass to standard 2 mushroom type bass ?
 I'm thinking ;removing the ‘’handle’’ like extension first and making a new cover/bass board for the bass side and adding a new 2 bass mechanism and a air button to the bass side would work..or would it ? has anyone tried this  before or is me getting board and looking for new stuff to do? I really like to convert one of my 112 from spoon to 2 mushroom bas without the handle & spoons..any advise welcome..cheers. Mus
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #1 on: September 16, 2014, 02:48:12 PM »

The so-called "handle" is, I assume, what is sometimes referred to as the "growl box".
After your mods., you would presumably loose the...err...umm..."growl", for which these boxes are known and (?) loved.

Just a suggestion: rather than going to a lot of work to still retain only 2 mushroom buttons, why not perhaps fit a pokerwork  1140 (or even a 2915) bass end and then you will have the benefit of more buttons to play with. The bellows are the same size I think, but not sure whether the frames are compatible. (Too late at night here for me to pull boxes apart just to see; others may know).

Good luck!
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #2 on: September 16, 2014, 03:00:28 PM »

Hello all, is at all possible to convert Horner’s HA  112-113-114 series from spoon bass to standard 2 mushroom type bass ?
 I'm thinking ;removing the ‘’handle’’ like extension first and making a new cover/bass board for the bass side ...

Yes it is possible, I've done it once.  It is not necessary to replace the bass end plate,  Just the "handle" aka "growl box" which contains all the very simple mechanism you need.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #3 on: September 16, 2014, 03:14:46 PM »

Yes, I've also done it once. You have to make a complete new growl box as the compartments inside the Hohner one are not suitable for the new arrangement.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #4 on: September 16, 2014, 07:53:11 PM »

I'm confused.  Is this about keeping the 'growl box' but replacing the spoons with buttons OR doing away with the growl box and making the bass side 1040-like, but with only 2 buttons ??
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #5 on: September 16, 2014, 09:21:33 PM »

Making a new growl box with buttons.
I'm currently making two (not Hohner size) and will post photos of the internals when  finished.
Here's a pic of the outside of an earlier one:
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #6 on: September 17, 2014, 12:17:19 AM »

thank you for the professionals and their comments,and sorry for getting the name of the growl  box wrong  :|bl  now I know what it's called...
my original idea was not replacing the spoons with buttons but changing the whole bass side with out a growl box,
- as Tirpous said 1040 look a like but only with 2 bass button...many would sagest''get a 1040 why don't you'' (:)   I just like this little and light boxes just don't like the spoons  :-X
 - Malcolm,1040 and pokerwork are all different size won't fit..I have a few 1040's and poker works ,I just wanted 112 with out growl box, with bass buttons if at all possible that is of course  :-[ 
-Hohner 's arietta Cajun model has the button instead of spoon   
Logged

The Blues Viking

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #7 on: September 17, 2014, 07:07:17 AM »

I find the idea of replacing the bass end of a 4-stop (with that of a Hohner 1040 or similar) rather intriguing; does anyone know if this has ever been done?

TBV
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #8 on: September 17, 2014, 09:23:25 AM »

Just had a look at a H112 and a 1140.

The bellows are of identical dimensions, but as I suspected the frames are not compatible. So one would have to swap the left hand bellows frames over too.

Not a quick nor instantly reversible modification, but would potentially give you 2 "new" boxes: a 1140 treble with 2 spoon keys, plus a 2 stop with 4 mushroom keys. Usefulness? Dunno, though it might freak a few people out at a melodeon gathering.... >:E

Certainly feasible, but I've never done it myself....and unlikely to.   :D


Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #9 on: September 17, 2014, 10:39:25 AM »

my original idea was not replacing the spoons with buttons but changing the whole bass side with out a growl box,

I can't really see the point when you already have a 1040?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #10 on: September 17, 2014, 11:25:10 AM »

It might not be a big surprise for many players but I cannot really use the bass side correctly on any of my diatonic boxes, it is a different story with my PA’s. Because I can’t really use all bass buttons on a 4/8 bass boxes I find spoon type 2 bass 112/114 series easier to play. As  mention earlier just don’t like the spoon and prefer buttons for more than one reason. I find the left hand playing position much  more comfortable on models without the ‘’growl box’’  as my arm sits/fits much more comfortable on the bass side and I have better bellows control..when I'm playing on a models with growl box after a while my arm gets tried and lose bellow control a bit and keep pressing the spoon all the way down as a result they keep breaking or bending like Beckham  (:) 
Logged

Matt (Kings Norton)

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 304
  • West Midlands, UK
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #11 on: September 17, 2014, 12:40:15 PM »

it is a different story with my PA’s.

I think playing a unisonoric accordion first helps with lots of things but not really with the left hand.  I played accordion already and can get around the stradella OK, not too bad.  I've got a BCC# with stradella and I am having to "re-learn" it to go with pushing and pulling... I suppose the left arm is now doing one more thing.  Two basses though as you say is a lot of fun.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #12 on: September 17, 2014, 09:56:16 PM »

I could not stop laughing when I sow this...changing the bass on 1 row? some one already changed the whole thing...nothing is impossible  ;D   
Logged

nzsheepfarma

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #13 on: September 19, 2014, 09:29:41 AM »

Just as a suggestion without knowing dimensions etc but would it be possible to make an adaptor plate like I used to fit a Student IVM bass end to a Trichord. If you would like more information on this go to the link for BCC# Forum> Forum> Instrument Construction and Repair> Adaptor plate.
Basically out of a single piece of 25mm mdf using a CNC router you mill one side to fit into the bass side box dimensions and the other side is made to fit over the bellows frame.
Just a thought that may help you.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: converting Hohner 112 spoon bass to 2 bass mushroom bass ..would it work?
« Reply #14 on: September 19, 2014, 11:10:50 AM »

I could not log in to BCC  but registered now,soon I will be able to log in... I was thinking along the same line,making an extension to the bass side so I could join like a lid and it would be reversible too.It won't be a big part just deep enough for new bass mechanism for 2.   Don't know any one with CNC but is is not a big job I think I could do it my self with the tools I have.thanks for your help.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal