Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 [5] 6   Go Down

Author Topic: Different woods  (Read 23126 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Different woods
« Reply #80 on: September 30, 2014, 07:53:29 PM »

 
… as would similar experimentation on banjos ;)

 ;D ;D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Different woods
« Reply #81 on: September 30, 2014, 10:54:09 PM »

Theo

"Jeff, I agree with that,  why a box sounds a particular way is not amenable to scientific analysis.

 On the other hand we could have a whole new discussion on the differences between craft and art!"

Banjo makers are neck makers here in the states.  Most buy components and assemble.  There is some discussion about Maple vs Mahogany vs Walnut for the necks backs resonators and shells..  going so far as to claim "sunken" wood makes better instruments.. and then of course there are the bridges and the plastic  and or hide heads.
Add to that the infinite types of tone rings and their metal composition or wood in some cases.

As to the melodeon... I believe it is an engineered product crafted by some who rise to the level  of  "artist"... hence art.

I think that the "sound board" and the reed blocks may have the greatest affect/effect  and add to that... light boxes, no matter the material  and varnished or lacquered innards. I have been messing about with air mass, pressure and movement within the box.. intake and exhaust tuning.

Generally speaking   more mass more sustain.. lower mass less sustain.

I believe that Bruno Priez once made a chassis from metal.. only rumoured, never saw it, never heard it.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Different woods
« Reply #82 on: October 01, 2014, 06:30:48 AM »

Didn't Peter Hyde experiment with different reed block materials and share the results? I remember reading about how he tried a cornucopia of those great Aussie hardwoods I'll never get to work with, as well as some types of foam and other stuff. Angling for maximum tone and volume for the lowest possible weight. I'll look around for when I have a chance.

As far as construction materials go.... All other things equal, reed block (not casework) material, the method of attaching the reed plates to the blocks, as well as their orientation to the apertures in the faceplate, and firmness/rigidity of that plate, seem to be the biggest determinants of a given box's sound. But yes, there's still that witch factor that makes two otherwise identical accordions sound distinctly different. This happens with all instruments that I've played. It's the darndest thing, happens with new and used, vintage and contemporary. Play twenty Gibson A style mandolins, and suddenly one jumps out. I've actually done the Pepsi challenge with thise, although the actual number was closer to ten.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Different woods
« Reply #83 on: October 01, 2014, 01:45:25 PM »

Chris is exactly right.
There used to be a brand of mandolin called Flatiron, very good value in a handmade, semi production instrument (1980's).
Most were "decent" but, like he says, you could line them up and a few would "jump out" as WOW, this is a really good sounding ax.
Only variable, slight, slight, variables in construction.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Different woods
« Reply #84 on: October 01, 2014, 03:06:39 PM »

Quote
Only variable, slight, slight, variables in construction.

Even within the same species, 2 planks of wood may have significantly different properties (hidden variable).  Faced with that, string instrument makers often adjust thickness to obtain the desired stiffness/response.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Different woods
« Reply #85 on: October 01, 2014, 05:44:45 PM »

The real problem with designing any scientific comparison is the utter subjectivity of what something 'sounds like'. 
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Different woods
« Reply #86 on: October 01, 2014, 06:07:17 PM »

The real problem with designing any scientific comparison is the utter subjectivity of what something 'sounds like'.

No it isn't. If you (and others, statistically speaking) can't reliably tell the difference between two instruments by listening without knowing which is which, there *isn't* a detectable difference. Doesn't matter what the difference you're looking for is. Doesn't matter what you think ought to make them different, or not.

Whether you *like* the sound of something is indeed subjective, but that's not what is under discussion.

To all the people with "theories" about whether the case wood affects the sound, please note the following by people who actually know what they're talking about as opposed to speculating (all referred to in this thread):

1. Strasser have done experiments with universities and categorically states the wood makes no difference.
2. Mark Savoy says exactly the same thing.
3. Theo and Rees both agree with both of them.
4. Almost everyone who actually understands about instrument acoustics and sound (Anahata, Ukebert, me, ...) agrees with all of the above.

So pick a case wood because it looks nice, or it's eco-friendly, or not endangered, or nice to work with -- not because it affects the sound, because it doesn't.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Different woods
« Reply #87 on: October 01, 2014, 08:34:37 PM »

2478 members

Sie müssen mit dem Wissenschaftler zu hören. Ihr Sterblichen nichts wissen.

Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Different woods
« Reply #88 on: October 01, 2014, 08:57:11 PM »

2478 members

Sie müssen mit dem Wissenschaftler zu hören. Ihr Sterblichen nichts wissen.

.... Many of whom emphatically do NOT agree with the 'Fondo-Police'! .... And many of whom have status ... Brain Lafleur ... Paul Groff ... John Loomes...!!!

Also ...  from reading countless posts on this topic (and generally biting my lip...) I note that Rees , Theo, Anahata and Ukebert do NOT  adopt as implacable position as Ian claims in his post ....

Also ... Strasser do not present the research which they confidently cite in their webpage ...and as an academic, Ian should know better than to quote research that is offered by a commercial company, and without any references, which would then allow access to the relevant tests/experiments and peer-reviewed criticism.

So if we set aside the above ... there is a small vocal minority claiming absolute rectitude ...

....Twas ever thus!

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Different woods
« Reply #89 on: October 01, 2014, 09:41:19 PM »


1. Strasser have done experiments with universities and categorically states the wood makes no difference.
2. Mark Savoy says exactly the same thing.
3. Theo and Rees both agree with both of them.
4. Almost everyone who actually understands about instrument acoustics and sound (Anahata, Ukebert, me, ...) agrees with all of the above.


That's a breathtaking set of assertions!
My part if 3 is certainly untrue because I've not studied the work of either Strasser or the Savoys.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Different woods
« Reply #90 on: October 01, 2014, 09:54:38 PM »

Persons in the thread could be at cross purposes when the word wood is used but the part isn't specified. Which parts did Strasser test that were made out of wood... was it casework only? I don't believe the wood of the cabinet matters much to the sound. But the reed block material certainly could. A less rigid structure saps vibrational energy from the reed tongues. I am interested to know the extent of Strasser's research. For instance, there could be.misleading results if only single notes were tested, and the effects of multiple tones played at once are unknown. I still believe the cabinet wood is inconsequential, but still interested to know more. Just saying.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Different woods
« Reply #91 on: October 01, 2014, 10:30:56 PM »

I might as well quote Strasser's two paragraphs in question here:

From http://www.harmonika.com/en/interesting
Quote
Because the body1 of a diatonic accordions – unlike, for example, guitars and violins – is not a resonance body, the material from which it is made does not affect the instrument’s sound. We use multi-layered wood that is produced especially for us and which has proven itself thanks to its light weight, high stability and high resistance to distortion for more than 30 years now. Although advertised with “resonance wood” and other freely invented terms, test results from universities and research institutes have verified that the sound of an accordion is not affected by its body material.

We have performed many tests with various materials (metal, plastic, various solid woods, and plywood) and were therefore able to determine for ourselves that the body material has no effect on the instrument’s sound. The sound of an accordion is determined only by the reed blocks2, the reed type and material, (from strong to very subtle tremolo), the treble and bass mechanisms, and the manual (keyboard) cover. Most manufacturers adjust the tremolo to customer specifications. A strong tremolo is best suited for musettes, a normal tremolo for traditional music, with many traditional players preferring a subtle tremolo.

Notes:
1 - refers to "'body", so not reedblock.
2 - the reedblock is mentioned here as affecting the sound, though whether they mean material or other aspects of contraction isn't explicit.
3 - not clear whether they count pallet board as "body" or not.
4 - A lot of other detail is not specified.

I'm not an apologist for Strasser; read the above with appropriate caution as hinted by Microbot.

Also note what IanD said:
Quote
"theories" about whether the case wood affects the sound
...was talking specifically about case wood, not reedblocks
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Different woods
« Reply #92 on: October 01, 2014, 11:25:29 PM »


1. Strasser have done experiments with universities and categorically states the case wood makes no difference.
2. Mark Savoy says exactly the same thing.
3. Theo and Rees both agree with both of them.
4. Almost everyone who actually understands about instrument acoustics and sound (Anahata, Ukebert, me, ...) agrees with all of the above.


That's a breathtaking set of assertions!
My part if 3 is certainly untrue because I've not studied the work of either Strasser or the Savoys.

I didn't mean that you'd studied their work; I thought you said in an earlier post in the thread that you agreed that the case wood had negligible effect on the sound, in other words -- like Rees -- you agreed with their position. If my understanding was wrong, that only leaves Rees on point 3 :-)

I still stand by my last point, in the same way that almost everyone who understands about climate science agrees that the cause of global warming is largely anthropocentric -- all the reputable science and evidence points that way, the people who disagree are unable to provide any solid evidence for their contrary beliefs, but it doesn't stop them putting forward their beliefs as facts...

If anyone still thinks that Strasser is lying -- which I suspect is very unlikely, since apart from the damage to their reputation if found out, most universities nowadays wish to approve what is said commercially about their research -- why not write to Strasser and ask for a copy of the relevant papers? I'm sure they'd be happy to oblige since it would only back up what they say on their website.

Then we could concentrate on the things we all agree do strongly affect the sound and how these might be improved ;-)
« Last Edit: October 01, 2014, 11:49:59 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Different woods
« Reply #93 on: October 01, 2014, 11:50:02 PM »

Thanks, Ian. Yes, I had read that on their website once. I agree, the body shouldn't matter much. Even though it does technically transmit some sound, it's very far down the food chain as far as what matters to shaping the tone of the box.

In the past, I felt differently about this. That opinion was uninformed.

One part that could be lumped in with the body is the panel on the bass side, and this still vexes me. That panel could shape or contribute to the overall bass tone, to whatever extent, by selectively absorbing various frequencies. Would I be able to detect its impact in a blind test? I dont know.

The bass side doesn't have an open grille like the treble side does. Most bass panels have holes that allow sufficient air movement in the chamber below it, so the sound is not stifled. It's like a speaker box (I think), and also could function like a soundboard. Given, the player's arm and body are not allowing it to vibrate as freely as it might, none that I know of are tap tuned, and most of these are made from laminate, not solid tone woods. I am not aware of any builder incorporating this part into the design with the intention of it functioning as a soundboard. But I have always wanted to build two or three of these to Pokerwork dimensions from different tone woods, of proper thickness to facilitate vibration, and record the results against the original in a spectrogram.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Different woods
« Reply #94 on: October 01, 2014, 11:58:57 PM »

Thanks, Ian. Yes, I had read that on their website once. I agree, the body shouldn't matter much. Even though it does technically transmit some sound, it's very far down the food chain as far as what matters to shaping the tone of the box.

In the past, I felt differently about this. That opinion was uninformed.

One part that could be lumped in with the body is the panel on the bass side, and this still vexes me. That panel could shape or contribute to the overall bass tone, to whatever extent, by selectively absorbing various frequencies. Would I be able to detect its impact in a blind test? I dont know.

The bass side doesn't have an open grille like the treble side does. Most bass panels have holes that allow sufficient air movement in the chamber below it, so the sound is not stifled. It's like a speaker box (I think), and also could function like a soundboard. Given, the player's arm and body are not allowing it to vibrate as freely as it might, none that I know of are tap tuned, and most of these are made from laminate, not solid tone woods. I am not aware of any builder incorporating this part into the design with the intention of it functioning as a soundboard. But I have always wanted to build two or three of these to Pokerwork dimensions from different tone woods, of proper thickness to facilitate vibration, and record the results against the original in a spectrogram.

The size and location of the holes (and the panel thickness) in the bass panel does make a difference, the holes act just like the reflex ports in a speaker and resonate with the volume of air inside the bass end forming a peaky lowpass filter. You can analyse this using speaker design software, and you can also measure it by changing the number/size of the holes or taking the panel off completely and comparing the sound spectrums (yes I've done this when trying to explain why the bass end of my Oakwood is a bit "honky").

The panel is unlikely to act as a soundboard because it's effectively damped by having your hand pressed against it. If it did resonate it's unlikely to have a positive effect; people often seem to think that any resonance will improve the sound, but it's much more likely to degrade it. Tap tuning is used for guitar and violin top plates where structural resonances are crucial to the sound of the instruments, this isn't applicable to boxes (but the above cavity resonance is).
« Last Edit: October 02, 2014, 12:07:33 AM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Different woods
« Reply #95 on: October 02, 2014, 01:34:07 PM »

(looks in vain for that picture posted a few years back? of a transparent, plastic melodeon….)
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Different woods
« Reply #96 on: October 05, 2014, 02:15:05 AM »

Aw man! Why did you have to show me that? Now I want me a transparent plastic melodeon too!!!
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Different woods
« Reply #97 on: October 05, 2014, 01:37:31 PM »

Thanks, Aradru, that was it, what a show stopper!
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Different woods
« Reply #98 on: October 05, 2014, 02:22:31 PM »

Aw man! Why did you have to show me that? Now I want me a transparent plastic melodeon too!!!

Oh! Come on Frank, don't start me off again. So far, I have so many melodeons, I lost the wife in my workshop for two days amongst the bits and pieces.
  A see through melodeon? NO,NO,NO,NO..........Well, hmmm.  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Different woods
« Reply #99 on: October 05, 2014, 02:36:15 PM »

If you had see through melodeons, you might not have lost the wife.
Is this a reason for; or against? 

Hmm not sure about this one, I'll get me coat.

John

(Who is glad he started this thread)
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: 1 2 3 4 [5] 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal