Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Walters button repair  (Read 2493 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Walters button repair
« on: September 21, 2014, 03:21:27 PM »

My teacher Jack Conroy as most know has a Walters D/C# melodeon.
A few days ago I was doing a carpenty project for him and we were talking about melodeons,
while listening to melodeon music. It's tough work ;)
Anyway he was telling me that his Walters lost a button low B, He glue it on but now something is rubbing faceplate then the A button popped off. I have not looked at it but will be seeing Him again
tomorrow. So if I have a look and want to help glue the button on what's the right glue and is that
what the original makers would have use?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Walters button repair
« Reply #1 on: September 21, 2014, 04:58:14 PM »

I would guess that animal hide glue or fish glue would have been used and that would be my recommendation for a repair now. It creates a strong bond, but if necessary the join can be dismantled by careful dampening and gentle warmth. PVA, cyano-acrylate  and epoxy resin glues are too strong and permanent.

For a small job like fixing a loose button, you can buy liquid hide glue like this, for example, which is convenient to use, although it has a limited shelf life in the bottle. For larger jobs and more frequent use, it's best to obtain the solid glue pearls and a proper heated glue pot.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Walters button repair
« Reply #2 on: September 21, 2014, 06:35:43 PM »

Thanks , hide glue sounds good. that may be what Jack used already?
what about bonding ,my experience is scrap or sand away old glue to bare wood for better bond.
« Last Edit: September 21, 2014, 06:38:19 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Walters button repair
« Reply #3 on: September 22, 2014, 10:06:18 PM »

All is well or will be Paul Groff is on the way.  (:)
On a side note had to take my melodeon apart to fix the axle sticking again on one note. this thread http://forum.melodeon.net/index.php/topic,13438.0.html
pulled the axle, sanded and reamed holes again but this time I spun the axle around so the rough spot was between the levers.
that one button that was slightly harder to push is gone  (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

grizzlypaw3

  • New Starter
  • Offline Offline
  • Posts: 1
Re: Walters button repair
« Reply #4 on: September 26, 2014, 03:24:12 PM »

I would guess that animal hide glue or fish glue would have been used and that would be my recommendation for a repair now. It creates a strong bond, but if necessary the join can be dismantled by careful dampening and gentle warmth. PVA, cyano-acrylate  and epoxy resin glues are too strong and permanent. I have used these before and they work just fine. That's why I wanted to post about it here to let other people know.

For a small job like fixing a loose button, you can buy liquid hide glue, which is convenient to use, although it has a limited shelf life in the bottle. For larger jobs and more frequent use, it's best to obtain the solid glue pearls and a proper heated glue pot.

Thanks for sharing this.  A few of the buttons on my melodeons are shaky at the moment and was thinking of having it repaired.  I'm thinking of repairing it myself so I've ordered myself a hide glue.  Now as application I may need to read up on some threads here for guidance.  Any advice you can give would be helpful also. And thanks also to the original poster for sharing.
« Last Edit: January 27, 2015, 02:11:26 AM by grizzlypaw3 »
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Walters button repair
« Reply #5 on: March 07, 2018, 03:33:58 AM »

It's like déjà vu all over again (yogi Berra) (:)

So yeah I was doing a job for Jack and another button or possibly the same has fallen off so He ask if I could glue it back on for Him. I think I could tackle this without to much trouble, and Jack would be happy if he didn't have to go though the trouble bringing it or sending it somewhere to get fixed.
Mikes mobile melodeon repair service, at your service  ;)

So hide glue is appropriate per above.

But in another thread about glue Theo recommended this stuff ("Araldite or other epoxy") would that be suitable? This was recommended for Pearliod buttons. Wouldn't permanent be a good thing, assuming it gets done right.

I know when working with carpenters glue and wood that if it has been glue once already that just reapplying glue doesn't always work. Usually you need to open the grain again with light sanding and or just roughing up the surfaces to be glued. I assume hide glue would be the same in the need to remove the old glue which I've read that wetting or steaming will remove or loosen it. I guessing steaming would lead to more buttons coming loose. Maybe a hot damp piece of cloth laid on the area would help, if I end up using Hide glue.

Is there a better way to remove existing glue ?

Any advice appreciated!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Walters button repair
« Reply #6 on: March 07, 2018, 12:25:40 PM »

You don't have to remove old hide glue. Just use new hide glue.

That is ONE of the advantages with HIDE GLUE.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal