Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Re facing pallets  (Read 12176 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re facing pallets
« Reply #40 on: January 18, 2016, 01:11:05 PM »

I wouldn't recommend option 2. It's an aerosol and will get everywhere, the dog glued to the floor. Wife stuck to the workshop door handle etc.  >:E
It's basically 'spray mount' - what we used for mounting photos, artwork etc. for montages. It's OK providing you take elementary precautions such as spreading newspaper sheets on the workbench. Lay the pallets a few at a time on the newspaper, spray the glue and immediately transfer the pallets to the facing felt (kept out of reach of the spray). Change the newspaper, add a fresh lot of pallets and repeat.

Spray glue is great for covering large areas, but I'm with Nic on this.
That seems like a lot of faffing around compared with a small dollop of your chosen glue then quick swipe with a plastic spatula.

Also beware of glues labelled "spray mount" which designed to be removable to reposition artwork.
« Last Edit: January 18, 2016, 01:12:55 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Re facing pallets
« Reply #41 on: January 18, 2016, 03:58:21 PM »

I'm amazed this discussion has gone on for so long for what is a simple process
Me too!  ::)

I think the reason is, that the thread has turned into a discussion of materials and adhesives of which whole books have/can been written and not just a process.  (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Re facing pallets
« Reply #42 on: January 18, 2016, 04:21:59 PM »

I know, I've been glued to this topic and felt as though I should stick in my two cents.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Re facing pallets
« Reply #43 on: January 18, 2016, 05:17:58 PM »

yes, everyone on here gets attached to their favourite.   (:)
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Re facing pallets
« Reply #44 on: January 18, 2016, 05:41:15 PM »

By gum...
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Re facing pallets
« Reply #45 on: January 18, 2016, 09:27:08 PM »

Well, I don't know leather or not I should have said anthing? but contact me if you want to tell me to stick it. (:)
I 'd better stop before admin. Becomes unglued.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Re facing pallets
« Reply #46 on: January 19, 2016, 01:41:12 PM »

" Wrapsody in glue" ? ( apologies to G. Gershwin )  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Re facing pallets
« Reply #47 on: January 20, 2016, 02:14:43 AM »


But I do have a question here: Can someone recommend the best glue to use that is available in the USA, with some typical US brands, that I might likely to find in the local hardware store?  I referring to the glue for a fixing the felt to the pallet.  (We do have hot-melt glue guns here.)
Try these:

Suggestion 1

Suggestion 2

Suggestion 3 (I suspect this one may be PVA based, but that's OK)

Don't use hot melt glue to fix the facing material to pallets. You are unlikely to get a flat join and any resulting undulations prevent an effective seal and will leak air.
Thanks Steve!

Don't worry, I was not planning to use the glue gun for that part--just the part for securing the pallet back to the arm.  My wife already has 2 glue guns for her (non-musical) projects, and a bunch of glue cartridges for them, do I don't need to buy that.

I am going with option 3 because my wife also uses Aleene's for her projects too.
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Re facing pallets
« Reply #48 on: January 21, 2016, 06:33:15 PM »

Ok. Pallets now all refaced and glued back on arms after main bending. Treble side especially needed bending, but buttons are now high (seems to help with the buttons not fouling the now slightly shrunken celluloid keyboard - and I like them high).

But, is there an optimum pallet opening height. Does it use more air if it opens more, does it affect pitch, response etc.
At the moment there is too much travel, but I'm going to increase the height of the packing to limit travel.
What jobs do the keyboard do? Is it keeping muck out, aesthetics, protecting the keys from being bent out of line?
Is it really necessary?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Re facing pallets
« Reply #49 on: January 21, 2016, 06:36:42 PM »

What jobs do the keyboard do? Is it keeping muck out, aesthetics, protecting the keys from being bent out of line?
Is it really necessary?

Take the keyboard off and try to play the box, you will discover all the things it does.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #50 on: January 22, 2016, 01:15:30 AM »

But, is there an optimum pallet opening height. Does it use more air if it opens more, does it affect pitch, response etc.

It is surprising how little the pallets need to open to allow a proper sound. However, if the pallets do not open far enough, the sound will be muted and the pitch will be flat. You can easily test this simply by pressing a button gradually to open the pallet just a fraction - you will be able to hear the difference as you continue to press the button down more. The effect on the pitch/volume will differ depending on where in the range it is, also whether it is a push or a pull note.

Once the pallets have opened a certain distance (unspecified, but your ear will tell you where that point is), any further opening will have little, if any, subsequent effect on the pitch and volume.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Re facing pallets
« Reply #51 on: January 22, 2016, 09:08:21 AM »

The effect on the pitch/volume will differ depending on where in the range it is, also whether it is a push or a pull note.

That's interesting. I wonder if the change in pitch is caused by a change in pressure. On push the air pressure will be higher, so the small contribution of nearby air to the effective mass of the reed tip will be greater because the air is denser. Does the pitch go up on a pull note (that's quite hard to do!) - it would if my theory is correct.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Re facing pallets
« Reply #52 on: January 22, 2016, 09:23:50 AM »

I also worked out from experience that the significant difference between the sound of the two rows on those 9 coupler 4 voice Paolos of the 80s  is down mostly to the lower pallets for the inside row inside the fingerboard opening a lot less than the upper ones because you can see the lack of movement and you can remove all the fingerboard bits / grille you like but it still sounds like socks are stuffed in  ----

wheras a Corona-3`s row dif (which is a hell of a lot less) can be 100% alleviated by removing the bottom off the fingerboard , amazingly the humble Corona-3`s ancient lever mech is far more intelligently designed than the Paolo`s and allows the pallets to open fully
« Last Edit: January 22, 2016, 09:25:40 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #53 on: January 22, 2016, 09:33:13 AM »

The effect on the pitch/volume will differ depending on where in the range it is, also whether it is a push or a pull note.

That's interesting. I wonder if the change in pitch is caused by a change in pressure. On push the air pressure will be higher, so the small contribution of nearby air to the effective mass of the reed tip will be greater because the air is denser. Does the pitch go up on a pull note (that's quite hard to do!) - it would if my theory is correct.

Opening the pallet just a crack results in a muted, flat, pitch on both push and pull (just tried this out once again to confirm my previous recollections). The lower pitched notes (longer, more massive reeds) are the most easily affected, whereas the small high pitched reeds are least affected.

I think this flattened pitch effect has been discussed on the forum in the past, in the context of 'bending' notes. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal