Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Getting reeds to speak  (Read 3601 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Getting reeds to speak
« on: October 20, 2014, 10:46:53 PM »

I'd like some advice on getting reluctant reeds to sound - even on my Morino Club some of the M and H reeds take an awful lot of pressure to do their thing, or don't speak at all.  My Trichord's quite dismal in spots in this regard.  Lifting the tongue obviously gets them to sound, I try and get anything in the way of grit out from underneath the tongue too.  Valves are original and seem to OK, how about tips on getting them to work properly?  And so forth.  There doesn't seem to have been a thread on this here, surprisingly enough.  I did come across Theo remarking that working over reeds to make them speak properly was just as tricky, or more so, than tuning. 

Don't know if this is a type of "fettling," I did look at a few threads on that, which mostly seem focused on getting the clack out of Pokerwerken. 
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Getting reeds to speak
« Reply #1 on: October 20, 2014, 11:52:40 PM »

A search on "gapping" produced plenty of hits. Whether any are useful.....
That's just one of the keys to it, getting the gap between the static reed tongue and the plate right.
There's an art to it for sure. I know I've plenty to learn.
Middling reeds seem easiest. Bass reeds can be a pain. I was struggling for ages with a low concertina reed on Sunday - came to the conclusion it was just a bad reed or past it - nothing seemed to work.

No doubt one of the experts will be along in a while, but I generally find that on the tuning table volume is more important than speed of starting. If the reed sounds "happy" it's right!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting reeds to speak
« Reply #2 on: October 21, 2014, 12:50:35 AM »

The reed tongue must sit at the optimum height above the reed plate.  I believe you can only get the best setting by operating the reed and making a series of small adjustments till you get the response you want.  Certainly you can't do it be measuerment. The gap is different for different pitches, bigger for low pitch, smaller for high, and it is different for different reed qualities, generally speaking the poorer the reed quality the bigger gap you need to get the reed to speak.

In practice if you just have a few reeds that are slow then look carefully and compare the gaps of the reeds on either side - they should be similar, usually with a gradual decrease in gap towards the smaller reeds.  That is easy enough on the outside(push) reed but harder for the inside (pull) reed.

Reeds need to be clean and have good valves too and also be centralised.

A common cause of dull sounding reeds is when too much glue has been used to fix a valve and the glue has crept across to the reed.  You may need a magnifying glass to spot that one.

....  I did come across Theo remarking that working over reeds to make them speak properly was just as tricky, or more so, than tuning. 
 

It is the aspect of accordion work that I have taken the longest time to learn.  Another year or two and I'll have it cracked! 8)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Foma

  • Member
  • *
  • Offline Offline
  • Posts: 21
    • Гармонь
Re: Getting reeds to speak
« Reply #3 on: October 21, 2014, 07:21:14 PM »

Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Getting reeds to speak
« Reply #4 on: October 22, 2014, 02:03:40 AM »

Thanks for the pointers! 
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Getting reeds to speak
« Reply #5 on: October 22, 2014, 11:58:23 AM »


I would not recommend using this diagram for anything other than a general guide. The ease or otherwise of how a reed will speak depends not only on the gap opening at the tip, but also the quality and stiffness of the steel, the gap around the sides of the reed tongue, the type and quality of the valves, etc.

Theo makes the point well in his previous post:
Quote
Certainly you can't do it by measuerment. The gap is different for different pitches, bigger for low pitch, smaller for high, and it is different for different reed qualities, generally speaking the poorer the reed quality the bigger gap you need to get the reed to speak.

Furthermore, different styles of playing could require different reed gap settings: belting away ff outdoors for morris, etc., ideally needs an instrument with a different (wider) setting from one which will be used mainly for playing sensitively in a concert situation. In practice, a compromise somewhere in between is usually found.

Setting the reed gap goes hand-in-hand with tuning; changing the gap also affects the pitch, so the reed gaps need to be optimised first before the reed tongue is tuned. However, sometimes the stresses generated by the tuning/filing process can affect the gap, so gap-setting and tuning becomes a reiterative process.

It's a wonder sometimes that the reed response and intonation ever get properly set at all. But they do, of course, and this is where reed setting and tuning is an art, a skill to be gradually learned through careful work and experience. Theo and Rees are real masters at this and by talking to, and watching them, I have learned a great deal over the last few years. (Thank you both!  :|glug )
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

A.J. Walker

  • Good talker
  • **
  • Offline Offline
  • Posts: 58
Re: Getting reeds to speak
« Reply #6 on: October 22, 2014, 12:59:03 PM »

Anyone seriously thinking about tuning/voicing etc. should maybe have a look at this site....

http://talkingreeds.com/

(Apologies if the link to this site has been posted before.)
I've tried visiting "talking reeds" before on two different computers with different anti-virus programs, which blocked me from going there claiming it contained malicious code. Anybody else run into this? Take care!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting reeds to speak
« Reply #7 on: October 22, 2014, 01:21:13 PM »

I've had no trouble accessing that site. I've been aware of it for some time, lots of useful information, but what puzzles me is that the person who runs the site seems to prefer to be anonymous. Anyone know who the person behind it is? 

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JohnS

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
Re: Getting reeds to speak
« Reply #8 on: October 22, 2014, 02:03:25 PM »

NOD32 antivirus detects JS/Agent.NNS Trojan on that page.  It could be a false positive, but probably best avoided for now.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Getting reeds to speak
« Reply #9 on: October 22, 2014, 02:09:10 PM »

Nothing shows up for me, but I use Firefox under Linux for browsing, so it wouldn't...

I have deleted the post.

No malice intended. Sorry for any inconvenience caused.
« Last Edit: October 22, 2014, 02:12:49 PM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Getting reeds to speak
« Reply #10 on: October 22, 2014, 02:09:57 PM »

Kaspersky's blocking it too.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Getting reeds to speak
« Reply #11 on: October 22, 2014, 02:13:33 PM »

Ultra-cautious work site has no problem with it.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Getting reeds to speak
« Reply #12 on: October 22, 2014, 02:32:11 PM »

NOD32 antivirus detects JS/Agent.NNS Trojan on that page.  It could be a false positive, but probably best avoided for now.

So does Bitdefender.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Getting reeds to speak
« Reply #13 on: October 22, 2014, 03:18:13 PM »

AVAST too   >:( :(
Logged
Tuner/repairer, now retired.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal