Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Inlay banding and wood supplier  (Read 5310 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Inlay banding and wood supplier
« on: October 26, 2014, 09:46:45 AM »

Can anyone recommend a supplier of reasonably priced wooden inlay banding and similar products in the UK.
Better still ifs there is a place I can visit in the south of the UK. I've checked out a few web sites but the prices seem to be ridiculous (e.g. £18 for a couple of metres of 5mm banding).

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Inlay banding and wood supplier
« Reply #1 on: October 26, 2014, 10:03:22 AM »

Doesn't seem an unreasonable price to me considering what goes into making the stuff. What do you expect to pay?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Inlay banding and wood supplier
« Reply #2 on: October 26, 2014, 11:02:49 AM »

I was hoping nearer to half that, but maybe I just don't know the cost of these things, which is quite likely.  (:)

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Inlay banding and wood supplier
« Reply #3 on: October 26, 2014, 11:05:06 AM »

Lot of work in making these


https://www.youtube.com/watch?v=3btoJ00BwDg


John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

sammypenn

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Inlay banding and wood supplier
« Reply #4 on: October 26, 2014, 11:07:08 AM »

 Try Touchtone tonewoods in Surrey. I buy some of my guitar making woods from them, but all bandings, purflings and tone woods are expensive.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Inlay banding and wood supplier
« Reply #5 on: October 26, 2014, 12:13:50 PM »

Thanks guys. Probably need a reality check on my side.
The best prices I've found are here:
http://www.woodveneer4u.co.uk/

I'll take another look at touchtone as well.
« Last Edit: October 26, 2014, 12:15:29 PM by RogerThomas »
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Inlay banding and wood supplier
« Reply #6 on: October 26, 2014, 01:24:07 PM »

Hi
Are you wanting just 1 length or a regular supply,I may have a few lengths in workshop

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Inlay banding and wood supplier
« Reply #7 on: October 27, 2014, 12:24:13 AM »

Hi Pete,

That's very kind to offer, but I think I can get what I need from http://www.woodveneer4u.co.uk/

I'm after a couple of metres, to decorate a Modell II that I've stripped back to bare wood ( the original finish was beyond repair).

Roger

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Inlay banding and wood supplier
« Reply #8 on: October 27, 2014, 06:39:31 AM »

.
   Ah, but an inlay designed for marquetry might effect .. the tone of the box?  >:E
Logged
  _       _    _      _ 

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Inlay banding and wood supplier
« Reply #9 on: October 27, 2014, 07:19:27 AM »

Hi Chris,
You think so? I had not thought of that. The banding will be 5mm or 7mm wide. I suppose the only way to find out would be (a) assemble the box and take a sound profile (record and view the signal), (b), add inlay and repeat (a), then compare the sound/profile to look out for difference.

And a couple of questions.
1) are there different inlay constructions (I think I understand how inlay is made...and the stuff I'm looking at seems to be regular inlay, like the stuff we used on the Pariselle box
2) is inlay used as a part of the audio design or just for decoration?

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Inlay banding and wood supplier
« Reply #10 on: October 27, 2014, 07:23:22 AM »

Try here: http://www.originalmarquetry.co.uk/category_Inlay_Bandings_1.htm

Their prices seem more in line with what I used to pay when Craft Supplies used to stock bandings. Mind you, prices quoted are ex-VAT.....

Graham
« Last Edit: October 27, 2014, 07:25:30 AM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Mike Carney

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 701
  • In sunny Sheffield
Re: Inlay banding and wood supplier
« Reply #11 on: October 27, 2014, 08:09:53 AM »


   Ah, but an inlay designed for marquetry might effect .. the tone of the box?  >:E
And so many different woods... >:E
M
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Inlay banding and wood supplier
« Reply #12 on: October 27, 2014, 09:16:36 AM »

I assume we're talking about tree wood here?


John  8)
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Inlay banding and wood supplier
« Reply #13 on: October 27, 2014, 09:56:34 AM »

What other wood is there John? Except Fanghorn tone altering wood, very rare and costs about 18 quid a metre.

Rog. What have you started?   8) 8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Inlay banding and wood supplier
« Reply #14 on: October 27, 2014, 01:35:57 PM »

 :D
Once I have finished this project I suppose I'd better post a couple of pictures. I'm basically tarting up a Modell II that I've stripped, but which will look very boring without some adornment. I did think of trying to inlay HOHNER Modell II etc but drew away from that for the time being. I aim to pretty much copy what we did on the Pariselle boxes. I've also got to remove the bass button step to make the inlay cut.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Inlay banding and wood supplier
« Reply #15 on: October 28, 2014, 05:07:53 AM »

There is a company from Korea that sometimes shows up at the NAMM convention that used to sell samples, I have used it here and there but the style is a bit different than the video. The do complicated patterns by dying wood strips that are about 1.5 mm and lay them side by side so that you build images kinda like pixels, so you get things like dolphins and zig-zags ect. I used some when I did a keyboard for Skip Henderson https://www.flickr.com/photos/26639011@N06/6607764723/in/photolist-j6dcRv-4R9Pm6-b4UweZ-83GQim-6tjXfb-89hUaR-83GQ3Y-kxHvUd-bJQnJK
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Inlay banding and wood supplier
« Reply #16 on: November 05, 2014, 12:59:34 AM »

Been a customer for donky's  (donkeys) (donkies) years.

http://karin-rost.com/en/
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Inlay banding and wood supplier
« Reply #17 on: November 05, 2014, 07:43:52 AM »

Were the slots for inlays pre-cut on the Pariselle course?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Inlay banding and wood supplier
« Reply #18 on: November 05, 2014, 08:09:20 AM »

Emmanuel has a router but we watched him do it for us. Quite a vicious bit of kit.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Inlay banding and wood supplier
« Reply #19 on: November 05, 2014, 08:56:48 AM »

Just remembered David Dyke at http://www.luthierssupplies.co.uk/

Bandings and purflings are listed in the catalogue under guitars.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal