Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: tuning question?  (Read 3287 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
tuning question?
« on: April 11, 2009, 10:55:37 PM »

I'm tuning a Pokerwork D/G using 'Dedic' tuning.  In working through the G row on the fifth button draw E I have tuned one reed + 6.5 cents and the other -6.5 cents  which results in a pleasant tremolo to my ear but the resultant note is 5.5 cents flat with both reeds sounding together.  I started tuning at the low end of the G row and none of the other (lower) notes have done this.  I can't for the life of me figure out why the two reeds sounding together are flat when the reeds are tuned exactly the same distance from the true note.  Is there a trick I'm missing?

Michael
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: tuning question?
« Reply #1 on: April 12, 2009, 05:17:15 PM »

I'm tuning a Pokerwork D/G using 'Dedic' tuning.  In working through the G row on the fifth button draw E I have tuned one reed + 6.5 cents and the other -6.5 cents  which results in a pleasant tremolo to my ear but the resultant note is 5.5 cents flat with both reeds sounding together.  I started tuning at the low end of the G row and none of the other (lower) notes have done this.  I can't for the life of me figure out why the two reeds sounding together are flat when the reeds are tuned exactly the same distance from the true note.  Is there a trick I'm missing?

Michael

Are they +/-6.5 cents with the reed block in the box, or outside?

Is the -5.5 cents with both sounding in the box or outside?

Do you get the same tremolo rate with the reeds inside and outside the box?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: tuning question?
« Reply #2 on: April 12, 2009, 06:28:52 PM »

I'm tuning a Pokerwork D/G using 'Dedic' tuning.  In working through the G row on the fifth button draw E I have tuned one reed + 6.5 cents and the other -6.5 cents  which results in a pleasant tremolo to my ear but the resultant note is 5.5 cents flat with both reeds sounding together.  I started tuning at the low end of the G row and none of the other (lower) notes have done this.  I can't for the life of me figure out why the two reeds sounding together are flat when the reeds are tuned exactly the same distance from the true note.  Is there a trick I'm missing?

Michael

Are they +/-6.5 cents with the reed block in the box, or outside?

Is the -5.5 cents with both sounding in the box or outside?

Do you get the same tremolo rate with the reeds inside and outside the box?

Ian

All of it was 'in the box'.  Actually I looked at it again this morning and noticed that one of the reeds was set with a larger gap than the other and was slower to speak.  When I corrected that the note from the two reeds together settled right back on target!  If I'm not careful I learn something every day.  :) 
Logged

HallelujahAl

  • Guest
Re: tuning question?
« Reply #3 on: April 13, 2009, 09:20:04 AM »

Quote
All of it was 'in the box'.  Actually I looked at it again this morning and noticed that one of the reeds was set with a larger gap than the other and was slower to speak.  When I corrected that the note from the two reeds together settled right back on target!  If I'm not careful I learn something every day.  :) 

Just a small point but after resetting the reed height did you find that you needed to re-tune the reed again? I find that simply moving the reed around can upset the tuning and it'll sometimes need re-doing.
AL
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: tuning question?
« Reply #4 on: April 13, 2009, 03:09:57 PM »

Quote
All of it was 'in the box'.  Actually I looked at it again this morning and noticed that one of the reeds was set with a larger gap than the other and was slower to speak.  When I corrected that the note from the two reeds together settled right back on target!  If I'm not careful I learn something every day.  :) 

Just a small point but after resetting the reed height did you find that you needed to re-tune the reed again? I find that simply moving the reed around can upset the tuning and it'll sometimes need re-doing.
AL

Yes it did need retuning after resetting the reed.  The interesting thing to me was that a small difference in the reed height changed the way the two reeds interacted so much. 
Logged

HallelujahAl

  • Guest
Re: tuning question?
« Reply #5 on: April 13, 2009, 06:15:04 PM »

Quote
Yes it did need retuning after resetting the reed.  The interesting thing to me was that a small difference in the reed height changed the way the two reeds interacted so much.

yes - I see what you mean. Another factor of course may well have been the fact that more pressure was needed to make the reed with the larger gap sound. The extra pressure may also have been affecting the 'good' reed perhaps? An interesting conundrum - I'm really interested in this stuff. Wonder if there's a reed tuning course one could go to rather than have to learn ad hoc? ;D
AL
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: tuning question?
« Reply #6 on: April 14, 2009, 08:47:34 PM »

As it has been described on this forum in various threads, two reeds sounding together will sometimes "suck" the pitch together, making them sound unison even though they are tuned a few cents apart. This is the reason that it's VERY hard to tune a tremolo with less than about 5 cents - the reeds will suck the pitch to unison. On the other hand, this makes it a little easier to tune bone dry, as you will clearly hear when the reeds close in together. I find that this varies with pressure - if the reeds are not of the best quality, or has been retuned a lot, they will suck together when played loud. I was tuning some reeds a couple of months back that had been tuned up about 40 cents (from the original low pitch - 20's box), and it just did not sound 'right' with tremolo. Then I tuned them all dry (MMM 3 voice) and suddenly the box had a lot more power - they closed in to unison very easily, and 'worked together'.

I find that the same goes when just one of the reeds are less than perfect quality - has been retuned from another note, is not set right in the slot, valve not opening correct etc. etc. The 'strong' reed will have a tendency to suck in the weak reed. This is just what I've experienced - perhaps someone with more theoretic knowledge or practial experience has another point or two on this matter?
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: tuning question?
« Reply #7 on: April 14, 2009, 10:02:42 PM »

<snip>I find that the same goes when just one of the reeds are less than perfect quality <snip>
It shows the importance of getting good reeds! Unfortunately it seems that many chinese-made reeds lack manufacturing precision and differences between two reeds producing the same note can make them hard to tune or sound "right". From my limited experience anyways.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal