Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New bellow for a very small 1 row box ??  (Read 1400 times)

0 Members and 1 Guest are viewing this topic.

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
New bellow for a very small 1 row box ??
« on: November 14, 2014, 03:30:54 PM »

Hello all, can anyone recommend a new bellow maker/manufacture preferably Italian ? it is for a small 1 row box- measures 26cm x 14 cm..it is about 2 cmx1 cm  too big  from Hohner’s smallest size new bellow.
Logged

chris obrien

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: New bellow for a very small 1 row box ??
« Reply #1 on: November 14, 2014, 05:09:48 PM »

Hello
   ive just had a bellows made for a 2 row paolo soprano its slightly bigger than a hohner pokerwork , it was made in Slovenia ,
    I sent them the ends of the old bellows ,so they completed the bellows for me ,and it is a very good quality bellows,
 with postage it cost me about $185 us dollars ,if you log into ebay ,, for bellows for accordion ,, you will find there advertisement there
 I hope this is helpful to you,
Logged

Bobtheboat

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
  • 'On the cut' near Lichfield, UK
Re: New bellow for a very small 1 row box ??
« Reply #2 on: November 14, 2014, 08:36:33 PM »

Theo Gibb has Italian bellows, custom made, advertised on his site (The Box Place). Bob
Logged
'Rowbotham Erika Extraordinaire' (12 bass + stop G/C/acc), Hohner Liliput Bb-Eb. Castagnari Rik G/C/acc

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: New bellow for a very small 1 row box- now sorted !
« Reply #3 on: December 15, 2014, 01:56:08 PM »

thanks for replays and  advises...bellow now sorted from Italy, new Marconi bellow ordered and hope fully it'll arrive soon  :||:
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal