Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 'Clicking' bass spring on Pariselle One Row  (Read 1826 times)

0 Members and 1 Guest are viewing this topic.

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
'Clicking' bass spring on Pariselle One Row
« on: December 04, 2014, 08:13:08 PM »

My Pariselle One Row has developed a 'clicking' spring on the bass button in the 'growl box'.

I've taken the box off and looked it in operation, but nothing appears to be catching or hindering movement/bending of the spring.
It sounds as if there is tension building up and being released as the spring is bent, causing the click. But its not obvious how.

Any suggestions?

Thanks, Andy
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #1 on: December 04, 2014, 08:17:11 PM »

Might not be the spring, the pallet could be the source, catching on something, or the button catching on the hole.  With the growl box off operate the button so you can hear the click and at the same time place a spare finger on each moving part in turn - you may be able to feel where the noise comes from.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #2 on: December 04, 2014, 10:13:32 PM »

Thanks Theo. I had tried that, and concluded it was the spring.
I'll take the box off again, and try removing the spring to see if that 'removes' the issue.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #3 on: December 04, 2014, 11:05:34 PM »

It could be the way the spring presses on the pallet, might push it slightly sideways, or might cause the hinge edge to lift and then drop.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #4 on: December 05, 2014, 09:40:53 AM »

Move one end of the spring to a slightly different place, that usually fixes it.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #5 on: December 05, 2014, 06:09:20 PM »

Reseating the spring has done the trick. Luckily there was already an alternative 'anchor' hole in a convenient place. Emmanuel thinks of everything!!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #6 on: December 05, 2014, 06:42:14 PM »

Before fitting the bass springs I flatten the end on a fine linishing belt to produce a chisel point which digs into the wood.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: 'Clicking' bass spring on Pariselle One Row
« Reply #7 on: December 08, 2014, 02:15:26 PM »

Wow, Rees, that's great attention to detail!  It reminded me of the time Ivor made me wait months for a set of treble springs.  he sourced them from Hohner Switzerland and I swear they were gold plated - compare that with a Chinese Pokerworks springs!

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal