Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Pesky Toy Melodeon  (Read 6019 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Pesky Toy Melodeon
« on: January 05, 2015, 06:44:25 PM »

Don't shout at me for bringing up the subject of toy melodeons again but I was asked about this question today:

Does anyone know what glue I can use to fix a child's accordion like this? The bellows were ripped loose from the plastic today by an over enthusiastic child.  I have modge podge, hot glue, and  the generic yellow and black multipurpose tube (Uhu or bostik?) at the moment. http://www.play.com/stores/BestChoice/listing/1110759867

The person posing the question is not very well off and can't afford to replace the toy at the moment so given that the bellows have entirely parted company with the end box is gaffa tape the only option? All suggestions gratefully received!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Pesky Toy Melodeon
« Reply #1 on: January 05, 2015, 07:35:32 PM »

When 'Chanson' pimping was all the go on Melnet I found that Evostick worked well for joining two bellows together so I think it will work ok on the job you have in mind....let the two surfaces almost dry before joining. The two Chansons I pimped are still being played.....
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Pesky Toy Melodeon
« Reply #2 on: January 05, 2015, 07:41:25 PM »

Araldite  :D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Pesky Toy Melodeon
« Reply #3 on: January 06, 2015, 07:11:45 AM »

Oh god ,I rebuilt 25 of those things for a music class we teach each year.
You want a solvent base glue with some gap filling ability.
 All the ones I got in the last batch were badly glued and leaked like a sieve.
The quality of these has gone way down I spent hours getting them to play passibly well.
 The clearance of the reeds was so bad I had to drift the metal of the reed plate with a chisel to close the metal up around the reeds to get it to play at all.

Never again!
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Pesky Toy Melodeon
« Reply #4 on: January 06, 2015, 07:22:28 AM »

...a chisel...marvellous... (:)

YorkieKen

  • YorkieKen
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 149
Re: Pesky Toy Melodeon
« Reply #5 on: January 06, 2015, 09:40:09 AM »

I suggest solder and a blowlamp.... >:E
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Pesky Toy Melodeon
« Reply #6 on: January 06, 2015, 09:55:28 AM »

Looks like it is structurally made of HD polythene or similar. I'm not sure even Araldite sticks that, so a bit of gentle heat might even be the thing.

Should you smell cyanides that its polymetacrylate; you should probably stop  :|glug
Logged
  _       _    _      _ 

sticky fingers

  • Tech Guru
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Pesky Toy Melodeon
« Reply #7 on: January 07, 2015, 06:55:37 PM »

Thread, (Are Melodeons Too Expensive) Answer, see, I knew you could get a box for under £20!, and with 7 buttons!, that's 2 more than I use at present!, what are the reeds, better ware? best wishes sf.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Pesky Toy Melodeon
« Reply #8 on: January 08, 2015, 06:36:20 AM »

Definitely not polyethlene , more like ABS or PVC. Model cement or "gap Filling superglue" will work. I had to use clamps to close the gaps so the glue could take.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Pesky Toy Melodeon
« Reply #9 on: January 09, 2015, 12:27:24 AM »

I recently had to repair a Rocking Motorbike Santa, who had knocked one of the sidelights from his bike. I tried pukka plastic modelling cement which had no effect at all. I then gave up working properly and tried Evostick, which worked. The plastic I fettled is the same sort, as far as I can see, as my Chanson, so this might work for you. I have not, of course, tested my repair for strength!  :||:
Good luckl!

Chris B.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Pesky Toy Melodeon
« Reply #10 on: January 09, 2015, 07:39:30 AM »

I remember now, (an age thing) I actually removed the plastic bits and then stuck the paper ends with Araldite.
I also sprayed the insides with a canvas water-proofer which helped seal any air leaks.
« Last Edit: January 09, 2015, 07:44:33 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Sven

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Pesky Toy Melodeon
« Reply #11 on: January 09, 2015, 01:59:59 PM »

are there actually any toy melodeons that are somewhat playable?
I once saw one at a festival, played 2 notes on it, and put it back. it was so terrible, i could get 1 short note on it on the pull, and then it felt like i'd rip it apart if i continued. Not exactly playable. But it would be fun to give as a gift to a child if it actually somewhat worked :).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pesky Toy Melodeon
« Reply #12 on: January 09, 2015, 02:18:45 PM »

There are some much older Chinese toy melodeons, usually white and shaped more like a space ship than a melodeon.  They are much better built, have quite good reeds and can play quite well, but are prone to the bellows collapsing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Pesky Toy Melodeon
« Reply #13 on: January 09, 2015, 03:50:00 PM »

With a bit of effort Nick we could wrestle this thread into the late lamented Chanson one.... >:E
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Pesky Toy Melodeon
« Reply #14 on: January 09, 2015, 03:59:25 PM »

With a bit of effort Nick we could wrestle this thread into the late lamented Chanson one.... >:E

THEO....OOOOO!!!!  8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Pesky Toy Melodeon
« Reply #15 on: January 09, 2015, 04:57:33 PM »

I have the aforementioned extended and silver-painted-bellows NCB Chanson in front of me (well, to one side) as I type. And yes, it does look like Araldite.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Pesky Toy Melodeon
« Reply #16 on: January 09, 2015, 11:54:43 PM »

NCB Chanson? Is that what they did after they closed down all the pits?  >:E
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Pesky Toy Melodeon
« Reply #17 on: January 10, 2015, 07:21:20 AM »

NCB Chanson? Is that what they did after they closed down all the pits?  >:E

 ;D ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Pesky Toy Melodeon
« Reply #18 on: January 10, 2015, 05:09:59 PM »

You can make these serviceable by removing one bank of reeds (and block the holes), replacing the valves with thin vellum like they sell as a masking film at art stores, and using a small screwdriver and a hammer to drift the aluminium plate around the most badly fitted reeds. 1.5 hrs of work will give you something sort of playable. Careful attention paid to chasing down leaks (pads) will help a lot with performance. They will still die after about 20 hrs though as the bellows have no corners.

The quality took a dive about 2-3 years ago as they used to be pretty playable.

 The company in Klingenthal that made the Sylvetta (closed) used to make a little thing called an Orgali ? that had 9 buttons and was very playable. I was told that they were made for the Swiss market.
 A bit of digging may turn one up on Fleabay.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Pesky Toy Melodeon
« Reply #19 on: January 10, 2015, 06:28:07 PM »


You can make these serviceable by removing one bank of reeds (and block the holes), replacing the valves with thin vellum like they sell as a masking film at art stores. Careful attention paid to chasing down leaks (pads) will help a lot with performance. They will still die after about 20 hrs though as the bellows have no corners.


That is what I did to my toy HERO melodeon. My reeds actually played well once they were properly set and had decent valves. And of course, removing one row conserves a lot of air. The corners (gussets) are mere cloth fabric, not much air retention there. I painted a coat of clear vinyl repair cement on the fabric while the bellows were stretched open. It dries quickly and is very flexible, but it's a nasty job due to the solvents emitted  :P.
  The HERO also has a radically angled open keyboard. I pasted self-adhesive foam pieces on the pallet faces, pasted self-adhesive felt bumpers under the keys, and re-bent the keys to limit button travel. The foam made them quite airtite.
   Kimric...I have seen the small Schwyzerörgeli that you mentioned. I think it was available in kit form, as well as finished. Here's a clip of it's bigger brothers, which seem to be rather obscure on this site.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal