Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: field repairs for clackety hohners  (Read 2522 times)

0 Members and 1 Guest are viewing this topic.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
field repairs for clackety hohners
« on: January 14, 2015, 03:03:21 PM »

a simple, temporary and reversible means of reducing bass/chord button rattle on hohners.
perhaps useful if you're undecided about having a pro job. ie. button bushing etc.
freezer bag plastic coated wire ties, applied carefully, no force warranted, as shown.
at this point on the button rods/levers, they can't drift either way.
ensure free sliding of rods through tie point.
it seems to be the 'free unsupported floating' of these levers that contributes to noise at the button end. - this provides another point of reference/stability for the levers. no prizes for pretty.   (:)





Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: field repairs for clackety hohners
« Reply #1 on: January 14, 2015, 03:41:39 PM »

Quite ingenious!  It starts one thinking of a de-luxe, Rolls-Royce version with an upstand and nice slippery PTFE bushing - but I'll bet your original is more cost effective.

Rob.
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: field repairs for clackety hohners
« Reply #2 on: January 14, 2015, 03:51:51 PM »

I didn't realize until now,at the expense to get it patented ;)
Logged
I always respect my elders but they are getting fewer in numbers.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: field repairs for clackety hohners
« Reply #3 on: January 14, 2015, 04:27:27 PM »

PTFE is quite hard, might not make much difference to the noise.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mcgrooger

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 833
  • Northern Roots
Re: field repairs for clackety hohners
« Reply #4 on: January 14, 2015, 05:47:22 PM »

Aren't Hohners supposed to be clackety?! :D
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: field repairs for clackety hohners
« Reply #5 on: January 14, 2015, 06:13:37 PM »

Aren't Hohners supposed to be clackety?! :D

One of their endearing features, I always thought.......


Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: field repairs for clackety hohners
« Reply #6 on: January 15, 2015, 01:03:58 PM »

Looks promising.

Can any of the experts see downsides? It's hard to imagine anything could go seriously wrong, but up heads up is preferable to a *** up
Logged
Harmonica Player
Just starting with the Box

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: field repairs for clackety hohners
« Reply #7 on: January 15, 2015, 03:25:49 PM »

Presumably this works by holding the buttons in contact with one side of the hole, so it never is able to hit the wood cos it's already in contact.  If my guess is correct then it must introduce some extra friction into the movement of the bass mechanism because of the sideways forces on the levers. It will do nothing for the usual biggest noise which is the slap as the pallet closes.
I think it's a daft idea to do anything that restricts the normal movement of the mechanism.  But I've not tried it so it may be brilliant!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: field repairs for clackety hohners
« Reply #8 on: January 15, 2015, 05:01:56 PM »

   ''I think it's a daft idea to do anything that restricts the normal movement of the mechanism'' quote.

shot yourself in the foot there theo....you're quite well known for restricting the normal movement of treble actions mechanisms?!   (:)


« Last Edit: January 15, 2015, 05:04:14 PM by gettabettabox »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: field repairs for clackety hohners
« Reply #9 on: January 15, 2015, 07:43:02 PM »

I usually describe what I do as limiting the movement.  That's a bit different from doing something that acts on the whole of the movement.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

btracy

  • Guest
Re: field repairs for clackety hohners
« Reply #10 on: January 16, 2015, 12:08:40 AM »

I might give this a try on my GCF Panther.  The bass keys are very noisy indeed.  If anything maybe I can come up with something else instead.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: field repairs for clackety hohners
« Reply #11 on: January 22, 2015, 07:38:21 AM »

You might try what the fancier instruments do and put felt on the inside of the bass button plate where the buttons go through.
 Problem might be that the button bass does not extend through far enough in some cases to touch the felt.

Kimric
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: field repairs for clackety hohners
« Reply #12 on: January 23, 2015, 03:34:08 AM »

I own one of Theo's instruments, an A/D Erica. His limiting of the treble keys has produced a fast, even and precise action.

I also have a single row Hohner 1040 in G. Peter Hyde set it up, the bass buttons have a smaller travel, with no sideways movement. Again, a fast precise action is the result, with a marked improvement in playability.

This is a common theme for the standard Hohners. Good sound, light weight, but clunky. However the simple mods to bass and treble actions, particularly if done by masters like Peter Hyde and Theo, greatly improve the playability of these venerable instruments.
Logged
Harmonica Player
Just starting with the Box

btracy

  • Guest
Re: field repairs for clackety hohners
« Reply #13 on: January 24, 2015, 04:26:28 AM »

You might try what the fancier instruments do and put felt on the inside of the bass button plate where the buttons go through.

I did think of that as well but that seems like quite a bit of work.  I noticed the metal frame that all those rods pivot on can be removed with just a few screws, and then it seems you'd just slide all the bass buttons out of the holes.  Has anyone done this with one of these?  I would think that would make it easier to then add felt to the insides of the holes, no?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: field repairs for clackety hohners
« Reply #14 on: January 24, 2015, 08:15:25 AM »

Bushing the holes with felt os a reasonably difficult job: When I do it I take the following steps:
  • Remove the pivot nails to separate the button rods from the pallet mechanism. Making sure to mark the rods so they can be put back where they came from
  • Release the springs and remove the bass mechanism
  • Ream out the holes in the casework. I use this reamer. It takes some experimentation to work out how much to ream the holes dependant on the bushing felt being used. If working on a celluloid covered box I usually but masking tape over the celluloid to protect it.
  • Cut the bushing felt (must use proper bushing felt to be successful) on the bias to the correct length, again experimentation is required.
  • Stick the bushing felt in place, I use PVA.
  • Replace bass mechanism
  • Replace button arms with new pivot pins, I use veneer pins from B&Q as they are the correct diameter

So a non-trivial task that takes experimentation to get correct. But well worth doing as at least 50% of the clack on a Hohner bass is the buttons hitting the casework.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: field repairs for clackety hohners
« Reply #15 on: January 24, 2015, 08:20:06 AM »

Yes it would be essential to have the holes clear of buttons before lining them with felt.  There is more to it than that - to make room for the felt I would expect to enlarge the holes. So you will need a reamer in your toolkit.

There is "quite a bit of work" to make useful improvements to these instruments.  A good job takes care and time.  While you have the mechanism out you could also fit softer facing material to the pallets.  The noise of pallets closing is usually the loudest of the unwanted noises on a Hohner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal