Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: On row bass pallet repair  (Read 1142 times)

0 Members and 1 Guest are viewing this topic.

Jeremy Burnett

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
On row bass pallet repair
« on: January 17, 2015, 03:35:29 PM »

When replacing the spring in a spoon bass pallet is there any special way of getting the spindle out? ( before using force).
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: On row bass pallet repair
« Reply #1 on: January 17, 2015, 03:39:08 PM »

You will need to grind the head off the pin. I usually replace it with a split-pin of the same diameter to facilitate subsequent removal.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Jeremy Burnett

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: On row bass pallet repair
« Reply #2 on: January 17, 2015, 04:02:45 PM »

Thanks Rees ,will have a go at that, Jeremy.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal