Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Design a Blues Box  (Read 7658 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #20 on: September 06, 2015, 12:41:46 PM »

I understand the carcass is a CC#, plus whatever Theo has in his boxes. This is totally experimental, don't even know what colour I'm getting, except that blue seems "unlikely" ;)

[ed] been experimenting - it has all maj7, min7 and 7 chords on the right end, and of course associated triads. Often three, and nearly always 2 voicings, generally push and pull in some way. Dm, Em and Gmaj7 seem to be its weakest but even these exist (and will work better with a bass)

The important pentatonics mostly need a bit of push/pull but generally that's rocking on single button rather than an awkward change bellows and finger at same time.  :P
« Last Edit: September 06, 2015, 01:20:32 PM by Chris Ryall »
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Progress notes on designing a Blues Box
« Reply #21 on: September 09, 2015, 12:11:57 PM »

discussion with Theo and a bit of spreadsheeting show there are just two kniri patterns. Here are [TT½] xN row patterns, beginning with C,B and Bb

C/D   E/F   G/A   Bb/C   D/Eb   F/G   Ab/Bb C/C#   Eb/F   F#/Ab  Bb/B   C#/Eb  E/F#   Ab/A   B/C#   D/E   F#/G   A/B

B/C#  Eb/E  F#/Ab  A/B   C#/D   E/F#   G/A   B/C   D/E   F/G   A/Bb   C/D   Eb/F   G/Ab   Bb/C   C#/Eb F/F#   Ab/Bb

Bb/C   D/Eb   F/G   Ab/Bb C/C#   Eb/F   F#/Ab  Bb/B   C#/Eb  E/F#   Ab/A   B/C#   D/E   F#/G   A/B   C/D   E/F   G/A  { Bb/C D/Eb }

I've extended the Bb row to show repetition, and that its octave 4 C mixolydian scale really is the same as the start of the inner row. With rows of this genre as a basis kniri offers all 7, major7 and minor7 4 note chords on the right end. Generally chords occur twice or more, and in both directions. You can of course also voice chords as inversions, for more patterns.

Kniri  scales repeat over 5 octaves (as you'd expect from using a 5 semitone pattern over a 12 note scale).  See above

For practical melodeon design you could therefore sensibly set up 2 kniri rows that are ½, 1½, 2½ etc tones apart - it would be a matter of how you wanted the chords to fall under the fingers.

My previous idea of 3 tones apart was actually a 'bad' idea as it effectively used the one of the two templates twice. That facilitated chromaticity in play … but wasn't nearly so efficient at generating chord patterns.

I've asked Theo to go for semitone apart, as I'm already used to flattening notes at will by dropping to outer row on my C#DG layout.

There is then a choice to be made as to what note to start rows on. While a 5 octave kniri box eventually offers all possible scales/keys we only get three octaves on melodeon.

Some patterns will lie in the higher notes, so I've ask for him to start on the lowest notes for which he has reeds lying around available ::) in order that  'dusty end' will contain  useful range. As a result I 'don't know' what key the box will be in. But D, G, C F etc will be 'somewhere' on it (:). Watch this space: [link made in 21st Century Box thread]:|glug
« Last Edit: September 09, 2015, 12:44:08 PM by Chris Ryall »
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #22 on: September 10, 2015, 09:22:55 AM »

This video of was posted up last month http://youtu.be/fnhWjv4ej_8 I think it is inventor Kniri Knaus himself in local Blues jam or similar, on a modified "kniri 221" Hohner one row.

Kniri mouth organ (feb) http://youtu.be/x_7mLI2k_z4 seems less useful. These guys bend all the notes anyway?

Listings of one row scales and chords http://www.kniri.ch/de/bluesaccordion.aspx
Logged
  _       _    _      _ 

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Design a Blues Box
« Reply #23 on: September 10, 2015, 12:38:05 PM »

This is how he performed in the 70s: https://www.youtube.com/watch?v=iV7LtxrVJp4
I remember them from watching TV as a child.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #24 on: September 10, 2015, 04:11:13 PM »

Well spotted!
Logged
  _       _    _      _ 

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Design a Blues Box
« Reply #25 on: September 12, 2015, 02:12:37 PM »

I'd think a B/C would be easiest, or a semitone apart. It's the basses that could be altered, but you'd lose some keys. You could then use chromatic harmonica blues players as inspiration.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #26 on: September 13, 2015, 08:30:18 AM »

Kniri himself seems to be a harmonica player, and has tried various off planet layouts. I have spreadsheeted various combinations, but (stupidly) did not appreciate that kniri splits the "possibles" into 2 (only 2) layouts that then repeat every 5th octave. There will be some maths in that - possibly interaction between 5 semitone pattern and 12 note chromatic scale. I suspect perhaps it is that six kniris happen over the 5 octaves, and semi tone up finds the other 6? But I'm at a festival just now …

So 1, 3, 5 semitones apart will advantage both patterns, and certainly finds a lot of chords. Semitone keeps the notes adjacent, bit like a semitone diatonic. 5 and 7 semitones apart correspond to our quart and quint layouts with similar notes staggered. The chords are still there, but "different" and wider fingerings

Tritone spacing, my original idea, or 2 semitone for that matter uses the same kniri pattern with one "shifted along". Seems to offer less chording, but opens up "off piste" notes to a greater extent. Shall we say jazz rather then blues.

So there are choices, and it may (as ever) depend on what you play. I've committed to semitone, as you advise too, but as I write am still waiting for a Theo slot. Seems there are many poorly melodeons in his hospital at present, and a pallet has just fallen off my van der Aa >:(
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #27 on: September 15, 2015, 08:56:46 AM »

Basically, I use a temperature-controlled soldering iron (readily available) and don't bother with a heat sink. Wax melts at around 180-200°C depending on the exact composition
Gosh, that's very hot! In another context tin/lead eutectic used to solder electical components melts at (google… ) 188oC. I'd naively though that boiling water would melt melodeon wax?
Yes I think that figure is on the high side.  Pure beeswax melts at around 65C, rosin at a little over 100C, so the combined melting point should be something between those figures.

 8) For a moment there … this little project was looking seriously "uncool" :Ph
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #28 on: November 12, 2015, 10:22:24 AM »

   'Bin nine long months now since my babe was conceived
   Now the ol' doctor tells me that it's my time to grieve
        Jobs fill the pipeline … the last one is mine
   Please, who's gonna fettle my sweet baby in time?


Defo got the blues this week … Ah well, it could be worse  :-\  … So

ADVERT I am seeking a melodeon fettler/tuner with some experience  (this doesn't seem something suitable as a first project to do myself, though that's my fall back)!

Scheme is to take a decent box carcass, probably a Hohner, and tune the reeds down as necessary. Kniri* scale runs tt½, tt½, tt½ forever (standard diato = tt½ttt½, repeating). Should that leaves a  gap at the squeaky end … no matter.  We would try to preserve low notes "cos dat's what Blues is 'bout"

 *In C that's  C D E F G A Bb C D Eb F G Ab Bb C Db
  (with similar 2nd row, based on B or C# whatever)

Bass end will probably go unisonoric in due course, but that can wait. The 2 rows will be half tone apart (there are only 2 kniri patterns); an old BC carcass might be ideal?

Actually … turns out I need a carcass too, please. Only half the reeds in a 2 voicer will get retuned, the rest masked off or used to substitute breakages. "keep it simple" So … does anyone have a BC, C#D or similar on which "about half the notes don't work", ideally with OK bellows and mechanism?  :Ph
Logged
  _       _    _      _ 

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Design a Blues Box
« Reply #29 on: November 12, 2015, 10:02:49 PM »

Chris, just a thought, but if that's what you want to do, why not try it all out on a FR18?  You can pick them up cheaply, and then developing your ideas and changing earlier mistakes would be a doddle.  I tried out Atzarin RHS on mine, it really didn't take long.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #30 on: November 13, 2015, 10:27:12 AM »

Don't actually like the tone quality of electronic boxes, Chris, and … blues is also about note bending? I think something like that would be great for layout experimentation but in the Kniri case the row layout is already well sorted. You just rise up push/pull in a tone tone semitone repeat forever. NB this throws the octave note from push to pull!

My only innovation has been to spot that Kniri pattern repeats itself over AFAIR 5 or so octaves and that C and C# Kniris therefore cover all the possibilities. While 5 octaves doesn't sound very "melodeonic" - the scales have an earlier repeat at 2½ or so (push becoming pull). A 10+11 2-row offers chording in most keys, major, minor and 7s. I did it on a spreadsheet.

So a poor old box that's seen better days for me. And that's "what it's about" too ;)
Logged
  _       _    _      _ 

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Design a Blues Box
« Reply #31 on: November 16, 2015, 11:10:54 PM »

Don't actually like the tone quality of electronic boxes, Chris, and … blues is also about note bending? I think something like that would be great for layout experimentation but in the Kniri case the row layout is already well sorted. You just rise up push/pull in a tone tone semitone repeat forever. NB this throws the octave note from push to pull!

My only innovation has been to spot that Kniri pattern repeats itself over AFAIR 5 or so octaves and that C and C# Kniris therefore cover all the possibilities. While 5 octaves doesn't sound very "melodeonic" - the scales have an earlier repeat at 2½ or so (push becoming pull). A 10+11 2-row offers chording in most keys, major, minor and 7s. I did it on a spreadsheet.

So a poor old box that's seen better days for me. And that's "what it's about" too ;)
     

just a silly question..        are you designing a "standard" Keyed layout (C or B for example).   with the key note repeated on the push every 4th button ,like most familiar diatonic boxes.   Or have you considered a continuing "spiral" of notes ,that seems to be implied by Kniri ?     just a thought. what are the pros and cons.  having all of one note on the push does limit some chord making possibilities for example.
  to be clear .   CD EF GA CB ED GF CA EB GD CF   
       or           CD EF GA BC DE FG AB CD EF GA                am i making this too complicated?   im sure you know what you want and thats all that matters,  hope the idea comes together for you..      brian
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #32 on: November 17, 2015, 01:03:57 AM »

Basically, and harmonically, a trichord is notes 1,3 5 of a scale and the melodeon keyboard then repeats … exactly those notes, again. So it doesn't extend beyond tri-chords. Working beautifully with the tri-chord bass. That is good  (:)

Kniri - and the more I look at it the more I see in it  - replaces the octave repeat with a minor 7 - already we have more colour in the chord. Then … well the reed plates on row are essentially simply turned over in the second octave making a "row full handful" … an extended chord with notes 1, 3, 5. m7, 9, 11 and b13 of the scale expressed. Notes b13=b6 in the lower octave. So some nice blue notes in there?

There are lots of other forms of harmony, and in particular the chord extensions into octave 2 can be  flat, natural or in some cases sharp, harmonising the various aolean, dorian and phrygean modes of the diatonic scale. Kniri selects just one of those. But with a second row semitone away you can select some other options.  "Full" chording becomes available on just 2 rows (there are only 2 kniri scales).

I have no idea where this experiment  will go, but have just "taken the risk" buying a B/C 23 button this afternoon. I intend to kniri both rows. I anticipate that the main reward will be in "playing in chords" (extended chords!) but who knows?

Simulation on http://chrisryall.net/chords suggests a low end chord, major, minor, min7, maj7 and "7" is then commonly available for most tonics. Generally (Db and Ab are weak here) a second voicing is then available in opposite direction in the upper octave.

So great potential - I am excited in this project 8)
sx
Specifically on your layout above: not quite right. Diatonic is a TT½TTT½ tone pattern. It repeats the octave every 4th button. Kniri is  TT½TT½… forever. 7th note (4th push note) becomes a blue b7 and the octave moves to become a pull note. Minor thirds and b6 notes appear naturally an octave up, with further options from shifting a finger to the other row. Much to explore!
« Last Edit: November 17, 2015, 01:17:31 AM by Chris Ryall »
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #33 on: November 18, 2015, 10:30:19 AM »

?
   Scarey!
Logged
  _       _    _      _ 

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Design a Blues Box
« Reply #34 on: November 22, 2015, 09:29:33 AM »

Just to try to detangle this from Sandy's intonation thread :Ph (mea culpa)

My poor, unsuspecting, undefended BC :'( is currently on the operating table - and I think I'll stay with =temp for now. I really don't know what keys will work, which not...

You're probably best-off doing that for now, until you've tried it out and seen how it works - and, of course, a B/C is (at least in theory) much closer to a chromatic harmonica than a blues one, and chromatic harmonicas are always tuned ET anyway.

This is proof of concept after all. To do that I'll need to get in some sessions - and these Bluesers can set of in … any key frankly.

But there is also a fundamental Kniri property here. There is no C kniri! I have gone for C in the middle (less tuning needed) but the TT/TT/ forever pattern puts that into G in the lower notes. Above middle C it is in F, then Bb. Think of a piano with all the black notes in pairs

Quote
Quote
I may well go "just" later on - it seems a tweak rather than a major retune issue

Just is only really suitable along a single row, so not really suitable for a "normal" B/C (unless, like some of the oldtime players, you are going to play it only "along the rows" in B and C).

But Meantone might work for you, depending on what keys you want to play in - for example you can tune a B/C box to play beautifully in C, D, G and A, but it'll sound horrible along the straight B row...  ???

The other constraint for me is that I sing, and therefore like to play on chords. Turns out there are 2 kniri setups, semitone apart, that together cycle though all possibilities. I am going with this too, and halftone arrangement substantially enriches the chords available - eg you can flatten any inner row note be moving a finger, without thought (as can a CBA). Yes, this is a bit bonkers.

Meanwhile … back in the Knirionium mines the gnomes and I spent a good hour filing at a reed end last night and it hasn't "gone sharp" at all >:( What are we doing wrong?
Logged
  _       _    _      _ 
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal