Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA113 with removeable reedblock  (Read 2536 times)

0 Members and 1 Guest are viewing this topic.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
HA113 with removeable reedblock
« on: February 10, 2015, 09:09:27 PM »

HA 113 in D.
i'm guessing this was done to facilitate future tuning.
the low octave reedblock is removable thanks to a small bridge and  sits snugly on a little gasket, but the M/M+ reedblock remains glued.
this is a genuine three stopper carcass, but likely originally in C or G, the M/M+ reeds, are stepped up on a ledge...and an old G block for the now removable low octave D reeds.

this would certainly ease access, but someone has to be brave enough to break a well glued reedblock free in the first place?!
i'm curious to remove and examine underneath for any apparent damage to soundboard, but not curious enough!... it plays well and airtight.
(confirmed, originally in G.)
« Last Edit: February 10, 2015, 09:22:36 PM by gettabettabox »
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: HA113 with removeable reedblock
« Reply #1 on: February 14, 2015, 08:23:03 AM »

I have used a Japanese flush cutting saw for the couple of times I needed to do this sort of thing.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA113 with removeable reedblock
« Reply #2 on: February 14, 2015, 10:10:28 PM »

clever.  (:)         
i thought somebody would have worked out a method and found a suitable tool.
did you manage to save slide guides at base of blocks?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: HA113 with removeable reedblock
« Reply #3 on: February 14, 2015, 10:14:13 PM »

The blocks can be steamed out fairly easily.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA113 with removeable reedblock
« Reply #4 on: February 14, 2015, 10:56:00 PM »

wow! i had thought solvents might be necessary, but good old steam...would this need special steam?...heated by a dragon's breath?   (:)
thanks rees.
i have no intention of messing around with any of my boxes by the way, not yet at least....all in tune!
Logged

Barry Swanson

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: HA113 with removeable reedblock
« Reply #5 on: April 02, 2015, 03:06:09 AM »

The blocks can be steamed out fairly easily.

...thats good to hear Rees as I've one that needs a tune and I imagine it would be tricky to do with the reed blocks glued in.
A couple of questions, does the amount of steam used mean all the wax is melted... and have you ever had any of the timber warp.?
Logged
...a little knowledge can be a dangerous thing.
...the more toys the better !

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA113 with removeable reedblock
« Reply #6 on: April 02, 2015, 11:54:04 AM »

It's really not that difficult to tune a 114 or 113 reeds with the blocks in situ.  You just need to use an Italian type reed hook to lift up the draw reeds. The only ones I have difficulty with are the one or two high reeds that are fitted with the reed tongues pointing downwards.  The hook lifter can't reach them.  If they need to be raised in pitch I just take them off the blocks Certainly steaming out the blocks then re-attaching them would be a much bigger job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: HA113 with removeable reedblock
« Reply #7 on: April 02, 2015, 01:07:46 PM »

I've had no warpage. I always take the reeds off the blocks and remove most of the wax before steaming.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: HA113 with removeable reedblock
« Reply #8 on: April 04, 2015, 06:47:42 PM »

I have just got a HA113-D for $120 (about 80 GBP).  Cosmetically the box is in good shape (old wooden keyboard model) so I am pleased with my purchase.

It looks like I will have to replace all the valves as around half of the plastic ones have fallen off or the leathers on the larger ones have curled. Whilst removing a valve with tweezers I noted that the reed lifted slightly and see that the wax is brittle. I am going to have to take all the reeds off and replace all the valves but I am having difficulty imagining how to wax the reeds back in with the blocks in place and am thinking it may be easier to lift the blocks off to do the work, so some questions...

1. How much steam to apply to the reed blocks to remove them and how to apply the steam?
2. If I do remove would it be better to give to the tuner so he can glue back in after setting up on the tuning bench or glue everything back together with hide glue before giving the box to tune?
3. If I don't remove the blocks or advice is not to remove them how do I wax the reeds back in where the blocks are so close together.
4. On the base end it also looks like some of the sealing cord has been displaced. Are the screws that hold the spoon valve box on underneath the valves or do I need to steam those blocks off also?

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: HA113 with removeable reedblock
« Reply #9 on: April 04, 2015, 06:57:07 PM »

I really would not go down the removing the blocks route, seems fraught with dangers. The reeds are easy enough to wax back in place using Charlie Marshall's brush method.

The growl box is held on by screws some of which are under the reeds but no need to remove the blocks just the reeds.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: HA113 with removeable reedblock
« Reply #10 on: April 13, 2015, 11:08:28 PM »

I have a 50's HA112in A  where someone removed the reedblocks.

The phrase "hack job" is inadequate to describe the effort.

One day I may attempt resurrection.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal