Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Project box, worth fixing?  (Read 2292 times)

0 Members and 1 Guest are viewing this topic.

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Project box, worth fixing?
« on: February 17, 2015, 12:48:38 AM »

I was given a "Beaver Brand" melodeon tuned Bb/Eb (actually somewhere between Bb/Eb and B/E). It plays really roughly, but does make sound. I would love to learn to fix up boxes at some point, and wonder if this one would be something worth learning to fix? Here are a bunch of pictures:

https://www.flickr.com/photos/mandobaron/sets/72157648539426233/

It's had a couple quick fixes done in the past.

I took the spring out of a mechanical pencil and stuck it behind the springless air button lever (What is the right word? My terminology for the innards of a box is shameful at best).

https://www.flickr.com/photos/mandobaron/15934589613/in/set-72157648539426233

 Also someone in the bygone past seems to have replaced a spring for one of the bass buttons with a safety pin.

https://www.flickr.com/photos/mandobaron/16553090801/in/set-72157648539426233

The bellows are in pretty good shape, but it seems to be leaking a lot of air once buttons start getting pressed, especially on the bass end, which is almost unplayable.

Is this thing salvageable, or at least give me some experience in learning about how the innards of a box work? Or is it beyond repair and would it only frustrate me?

Thanks,
Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Project box, worth fixing?
« Reply #1 on: February 17, 2015, 08:16:48 AM »

You can learn a lot by renovating that box.  The critical thing to check before going ahead is that all the reeds are intact.  If any are broken the only way to replace them is to remove the rivet and then fit a replacement with a new rivet.  In theory this should be fairly simple, but the problem is finding a replacement reed that is a good fit.  The choices are 1 - a salvaged reed from a similar box or 2  - make a reed.  Neither is easy.  I have replaced reeds like this in the past but I don't do it any more, it's just too time consuming, and not very satisfying.

If the reeds are all working you should be able to replace the valves, re-face pallets, replace any springs that are broken or not very good, replace bellows gaskets and tune to concert pitch.  The air leaks will mostly be from pallets. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Project box, worth fixing?
« Reply #2 on: February 17, 2015, 10:26:09 AM »

You could learn more than you ever wanted to know about repairing accordions from fixing it, but it's a cheap model - it never was much good and (no matter what you do with it) it never will be.  :(

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Project box, worth fixing?
« Reply #3 on: February 17, 2015, 03:46:34 PM »

It's not worth repairing such a cheap box for the end result of a playable box - BUT...  the amount of experience and expertise you may gain without risk to anyone's pride and joy is invaluable.  Just learing the basics of refurbishment doesn't require the final product to have all its notes playing.  Broken a reed?  Try a different technique on the next one then...  Tuning not quite right?  Try again and you'll find how far you can go before the tone is lost.

Rob.
Logged

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Project box, worth fixing?
« Reply #4 on: February 17, 2015, 08:06:50 PM »

Cool! Thank for the encouragement folks! I figured the box wasn't worth much monetarily, and do think that getting my hands dirty with the task of fixing it up would teach me a lot about how these little boxes work. Is there any sort of book that would go through how to fix such things like refacing pallets (I don't even know what that means), where to buy new valve leather, etc.?

Thanks!
Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Project box, worth fixing?
« Reply #5 on: February 17, 2015, 08:23:20 PM »

Well, I've done some searching on this site and realized that this forum might be the book! I found Steve's refacing pallets instructions:

http://forum.melodeon.net/index.php/topic,15510.msg190592.html#msg190592

and I am sure there is pretty much everything else I would need to know if I do some more searching.

One question. Where is a good place to buy the needed parts in the USA?

Thanks,
Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Project box, worth fixing?
« Reply #6 on: February 17, 2015, 09:09:24 PM »

Hi Baron,
Lester has some pictures of repair work and melodeon building that may help posted somewhere? I can't seem to find them now.
maybe some else knows where there hiding.
Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Project box, worth fixing?
« Reply #7 on: February 17, 2015, 11:12:15 PM »

One question. Where is a good place to buy the needed parts in the USA?

Frank Romano should be good for most things. Very knowledgeable man. He was in Montreal for decades but has retired to Boston or (somewhere down there).

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Project box, worth fixing?
« Reply #8 on: February 18, 2015, 12:00:33 AM »

Frank moved to Revere mass.

you also could contact PeterC  a member of this forum who lives in your neck of the woods
Winterport Me. He's a repairer who might have what you need.
pm me and I send you his number.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Project box, worth fixing?
« Reply #9 on: February 23, 2015, 09:36:51 PM »

I am sad to say that Peter passed away a couple months ago. I only got to meet him a handful of times, at the local Irish session in Belfast, he was wonderful. I had hoped to get up to his place at some point, and wish I had acted on the impulse sooner.

Next time I run in to some of the local box players I will see if any of them know where I could source some parts I am looking for.

Thanks for all the help, I look forward to getting my hands dirty with this project!
Baron

Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Project box, worth fixing?
« Reply #10 on: February 23, 2015, 11:48:02 PM »

Baron,
That is very sad news, thanks for letting me know.
I never meet him but spoke to him on the phone when He did work on my Beltuna.
I wish I made the effort to get up there to meet him as well.
I knew that he had been ill but thought he was recovering.
Box players lost a good man,Rest in Peace.

Good luck with your project!!

Hope to meet you some day and have a tune or two,
Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Project box, worth fixing?
« Reply #11 on: February 27, 2015, 05:35:21 PM »

Im not really a parts supplier but I do have a good supply of leather/felt pallet material and I do sell valve sets.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal