Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Valve leather  (Read 2518 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Valve leather
« on: March 20, 2015, 12:22:18 AM »

Anyone know what spec of leather is best for reed valves?  The leather needs to be soft on one side to seal over the reed aperture, but stiff enough to behave like a decent valve, so probably 1.5mm thick. And of course with no creases. I'm wondering what the old makers used to do for valves, when they didn't have Charlie Marshall to buy them from.

martin p

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 408
Re: Valve leather
« Reply #1 on: March 20, 2015, 12:48:01 AM »

Personally, I don't see the point of using leather valves when modern plastic ones work better, or is that heresy?
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Valve leather
« Reply #2 on: March 20, 2015, 07:05:41 AM »

Martin, probably.(:) in what way are plastic better than leather?  I think plastic valves can sometimes be a bit noisy.
« Last Edit: March 20, 2015, 07:08:26 AM by RogerThomas »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Valve leather
« Reply #3 on: March 20, 2015, 07:10:27 AM »

I think plastic or Mylar valves are better because they don't rot Rog. But to put these into an antique instrument is definitely heresy. >:E
 Edited for spelling
« Last Edit: March 20, 2015, 07:20:08 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valve leather
« Reply #4 on: March 20, 2015, 07:15:26 AM »

I agree that leather vales are better in some circumstances, especially for the lowest treble reeds and for bass reeds.  They do need more care in selecting and fitting, but the extra effort is well worthwhile for getting the best playing quality. You can also get synthetic leather substitutes for these low reeds but the ones I've seen don't really work as well as leather.  If they are all you can get use them, but the real thing is better.
As for what kind of leather to use - my advice is to buy Italian valves made for the purpose. They are available as plain leather valves to which steel boosters may be added, or as leather valves with one or two plastic boosters already fitted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Valve leather
« Reply #5 on: March 20, 2015, 07:25:51 AM »

You can also get synthetic leather substitutes for these low reeds but the ones I've seen don't really work as well as leather.  If they are all you can get use them, but the real thing is better.

Castagnari have been fitting synthetic leather valves with vinyl booster leaves to the lower reeds in their instrument for a number of years now. They seem to work fine to me and I can't detect any difference in sound between them and leather valves with steel spring boosters. I wouldn't have thought that such a maker of such repute would use them unless they were happy with the quality and performance.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Valve leather
« Reply #6 on: March 20, 2015, 07:30:32 AM »

The Hohner Carena I'm currently restoring (thirty press-ups for mentioning a PA on here) has leather bass valves with sort of plastic booster 'springs'... but does no one in their right mind make valves then (he says, rapidly hiding his Stanley knife under the bench). I ought to add that the valves I tried making were total rubbish and I vowed never to do it again. But with a jig and the right kind of leather it seems like the logical thing to do... (:) you can get lots of valves the exact size you want, nice and square etc.
« Last Edit: March 20, 2015, 07:33:21 AM by RogerThomas »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Valve leather
« Reply #7 on: March 20, 2015, 07:36:38 AM »

The Hohner Carena I'm currently restoring (thirty press-ups for mentioning a PA on here) has leather bass valves with sort of plastic booster 'springs'... but does no one in their right mind make valves then (he says, rapidly hiding his Stanley knife under the bench).

Valves are so cheap (a few pence each) it's hardly worth the faff of making them yourself when excellent commercial products are available. I'd say that the time spent trying to make satisfactory valves yourself would be far more profitably spent attending to the other things which need doing on your instrument.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valve leather
« Reply #8 on: March 20, 2015, 07:39:01 AM »

You can also get synthetic leather substitutes for these low reeds but the ones I've seen don't really work as well as leather.  If they are all you can get use them, but the real thing is better.

Castagnari have been fitting synthetic leather valves with vinyl booster leaves to the lower reeds in their instrument for a number of years now. They seem to work fine to me and I can't detect any difference in sound between them and leather valves with steel spring boosters. I wouldn't have thought that such a maker of such repute would use them unless they were happy with the quality and performance.

If you take a closer look I think you will find they are leather under the plastic boosters. Usually a paler colour than the traditional leather valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Valve leather
« Reply #9 on: March 20, 2015, 07:44:19 AM »

You can also get synthetic leather substitutes for these low reeds but the ones I've seen don't really work as well as leather.  If they are all you can get use them, but the real thing is better.

Castagnari have been fitting synthetic leather valves with vinyl booster leaves to the lower reeds in their instrument for a number of years now. They seem to work fine to me and I can't detect any difference in sound between them and leather valves with steel spring boosters. I wouldn't have thought that such a maker of such repute would use them unless they were happy with the quality and performance.

If you take a closer look I think you will find they are leather under the plastic boosters. Usually a paler colour than the traditional leather valve.

Oh - now I am suddenly uncertain.  ???
They look like synthetic leather to me, but I will check again.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valve leather
« Reply #10 on: March 20, 2015, 08:12:12 AM »

The ones I have seen are leather if a very pale grey colour.  I also use the same type that I get from Italy.

The problem with the vileda synthetic valves is that they don't flex as freely as leather, and they tend to harden with age. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Valve leather
« Reply #11 on: March 20, 2015, 09:55:25 AM »

Many Italian manufacturers use (goatkid -)leather valves with plastic boosters. They are in most cases German made (Moritz Grimm, Klingenthal). Carini tells me that similar valves are also produced in Italy, but their much higher price makes them less attractive. Personally, I prefer the traditional Italian valves with a small steel strip for the lowest reeds followed by Grimm leather valves (Grimm-size 5-8 ) and plastic valves for the ones higher up (Grimm-size 9 to 13).
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal