Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Painting over celluloid  (Read 17332 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting over celluloid
« Reply #20 on: April 29, 2015, 11:30:41 PM »

The paint seems to have bonded very well.  I spent some time bending the test piece almost to the pint of breaking and the paint film remained intact.

If you look carefully you can see a couple of places where I laid the paint on too quickly and it ran.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Painting over celluloid
« Reply #21 on: April 29, 2015, 11:41:21 PM »

what's the scratch resistance like? (great thing about celluloid.) ...are you brave enough?   (:)
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Painting over celluloid
« Reply #22 on: April 29, 2015, 11:41:49 PM »

Tell me about it Theo - I'm a lousy painter by brush or can, however have had me moments using the airline spray.

Can't recall which saint is reputed to have said it but 'Lord give me patience - NOW' is a disposition familiar to my nearest and dearest  ;)

Glad to hear the bond was good, I guess a year or so's playing will reveal if the wear and tear beats it or not, I'm amazed at the durability of the keyboard black Hohners use, it's probably only lamp black, shellac & oil but it seems to hold its own against the years and 'those bloody great hands & fingers'  ;D
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Painting over celluloid
« Reply #23 on: May 15, 2015, 07:35:55 AM »

Now for the rhinestones!
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Painting over celluloid
« Reply #24 on: May 15, 2015, 08:38:37 AM »

I would think the modern way would be using vinyl wrapping. If they can mould it to cover cars a squeeze box should be a doddle. Has anybody tried it?  I quite like the carbon fibre look.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Painting over celluloid
« Reply #25 on: May 23, 2015, 04:14:16 PM »

Thought it worth mentioning that I have a friend who makes his own black ellulose paint by dissolving old 78 gramphone records in acetone then uses a graphics air brush to apply it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Painting over celluloid
« Reply #26 on: May 24, 2015, 07:42:37 PM »

I do pretty much the same thing with celluloid scrap. I dissolve it in acetone then ad a bit of lacquer thinner to get a better surfacing. If you wait a week after spraying you can buff it up with polishing compound from the auto parts store.
 If you are a clever bastard you can use a brush to apply different shades of paint to get the cracked ice effect to match the repair to the surrounding celluloid.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

2rightfeet

  • Good talker
  • **
  • Offline Offline
  • Posts: 76
Re: Painting over celluloid
« Reply #27 on: May 26, 2015, 12:08:53 PM »

I used to work in the labs of a company that made industrial paints, including nitrocellulose lacquers.

Interesting idea, making black N/C paints from old 78s as Google confirms my initial recollection that these were usually made from shellac, not N/C, and contained other things that ideally you wouldn’t want in a black paint. Shellac will dissolve happily enough in cellulose thinners and makes a decent woodfinish (think of French polish) but I wouldn’t be confident of its performance over anything else, and it is more susceptible to staining by water than N/C.

Dissolving scrap celluloid in acetone is obviously nearer the mark so long as you remember that acetone is one of the most flammable solvents money can buy (fortunately also one of the less toxic). However, again I wouldn’t do it myself. N/C is inherently brittle and has to have something added to improve flexibility (a ‘plasticiser’) and usually a resin as well to enhance strength. In celluloid the plasticiser is camphor, but that is not used in N/C paints. Camphor is useful in other applications because it is very slightly volatile and so in a thin paint film may evaporate over time, leaving a weak or brittle film that will lose adhesion or will craze. How long this would take is a ‘how long is a piece of string?’ question; probably years rather than weeks.

While on this topic: a standard industry test for paint adhesion that you can carry out at home, called simply the cross-cut adhesion test.
When the paint is fully dry, take a Stanley or similar replaceable-blade knife with sharp point and cut a set of lines parallel to each other and as near as possible to 2mm apart. Cut a second set of lines at right angles to the first, making sure that every cut has gone right through the paint. Brush off dust and apply a strong adhesive tape (the officially approved grade almost certainly won’t be in your local office suppliers) rub it down then pull fairly sharply off.
If you cut 11 lines each time you conveniently end up with 100 squares, making percentage ratings easy. This is used mainly to compare sets of paints and there are no absolute rules about what results are ‘good’, but if more than a few chips and say 2 squares pulled off, I’d be concerned about adhesion problems. But at any rate it lets you compare your trial paints.
Obviously, you do all this on a test piece, not the melodeon you are trying to enhance!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting over celluloid
« Reply #28 on: May 26, 2015, 01:46:38 PM »

Thought it worth mentioning that I have a friend who makes his own black ellulose paint by dissolving old 78 gramphone records in acetone then uses a graphics air brush to apply it.

That does seem to be a making work!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Painting over celluloid
« Reply #29 on: May 27, 2015, 08:13:35 AM »

you do all this on a test piece, not the melodeon you are trying to enhance!
NOW you tell me.

Since i shove the celluloid in a small jar with a lid along with the acetone I'm not too worried about fire.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Painting over celluloid
« Reply #30 on: May 27, 2015, 09:02:30 AM »

I thought you had one some time back Kimric, or was that someone else?
Edited to say Arrgh, just remembered. It was an earthquake . Sorry it's an age thing. :|bl
« Last Edit: May 27, 2015, 09:04:44 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Painting over celluloid
« Reply #31 on: December 05, 2016, 10:46:53 PM »

..   I used cellulose car paint in matt black.  Tested on a scrap of spare celluloid first where coverage was good, and excellent bonding.

Did you use an aerosol can and were there any subsequent issues that you are aware of?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting over celluloid
« Reply #32 on: December 06, 2016, 08:17:19 AM »

Yes I used aerosol cans of black cellulose paint.  The result was excellent and there were no problems later.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Painting over celluloid
« Reply #33 on: December 06, 2016, 08:30:52 AM »

That's good to know. Thanks.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Painting over celluloid
« Reply #34 on: December 07, 2016, 01:50:38 PM »

This discussion opens up a whole area for custom finishing of tatty celluloid boxes, with as much bling as you can handle!  Seriously, there are many scruffy boxes whose celluloid has lost its surface finish, but surely that offers a nice smooth surface to paint without having to strip it off and make good the wood underneath?  How about using an irridescant laquer over that black so that it takes on a whole rainbow of colours?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting over celluloid
« Reply #35 on: December 07, 2016, 01:53:08 PM »

Cutting polish makes a good job of brightening up faded celluloid.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Painting over celluloid
« Reply #36 on: December 07, 2016, 02:06:52 PM »

Just like owning a Triumph (mine was a T100) - T-Cut the paintwork and Solvol Autosol on the metal...  Actually, once you got the casings polished, the engine leaked just enough oil that a wipe over with a cloth stopped it losing its shine.  I always fancied a satin finish black chrome on the frame, but before I could get it done triple plating was outlawed and chrome never stuck as well after that.

I agree that the carbon fibre matting look is fantastic - but I'm not sure I have the life expectancy to order a Briggs!

Rob.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Painting over celluloid
« Reply #37 on: December 07, 2016, 03:51:04 PM »

Rob, it's funny how you mentioned both Triumphs and Solvol Autosol today, of all days. Number-1-Son has just bought a (modern) Triumph and was wiping it over with some "stuff" after he'd been polishing up some bits of chrome which the dealer had missed.
To please Mr Gibb, I managed to turn the conversation towards melodeons (else I wouldn't be allowed to bring it here) and the rusty reeds which I'm in the process if cleaning. I didn't catch the name of the "stuff", but it's apparently some ultra-clever anti-oxidation preparation from the aviation industry, and "everyone's" using it! "Would it be OK to protect my much-laboured-over cleanish reeds? I wondered.
The discussion also encompassed the cleaning of chromework, and I couldn't, for the life of me, remember the name of the polish which "everyone" used to use on the dark ages of our youth. Of course it was Solvol Autosol, and b****y low slow and laborious work it was! But, when I got into old cars properly, I discovered the wonderful Strahldur. What a difference!
Your post just took me to reminiscence land for a few minutes.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Painting over celluloid
« Reply #38 on: January 14, 2024, 08:49:35 AM »

Apologies for bringing up a very old thread.

Just wondering why the celluloid painting did not catch up - I don't see custom-painted squeezeboxes in beautiful metallic colours flooding ebay. Does the paint not stand up to rubbing wear? Scratches/chips easily? Too hard to obtain a good finish unless you're a seasoned spray painter?

If a box has a very worn celluloid cover and needs a complete overhaul, giving it a sand and spraying over with some vibrant colour (Volvo saffron gold, anyone? Hot pink? Candy apple? Rose Gold?) seems like a good solution if the result is actually good and durable?
« Last Edit: January 14, 2024, 08:55:15 AM by mChavez »
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Painting over celluloid
« Reply #39 on: January 14, 2024, 10:10:33 AM »

Hi Theo,
I would possibly look at an etching primer first which will key to the surface.
I would also wipe over with a pre paint wipe,if it has any silicone polish on it you will end up with a moonscape finish.

There is a very good brush paint called Zimmermans,their primer sticks to anything.
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal