Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Steel rod identification - help!  (Read 5147 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Steel rod identification - help!
« on: March 28, 2015, 11:13:37 AM »

Some years ago I had some pallet levers made by a little man with a big press in Castelfidardo. I've now found a little man with a big press in Welshpool who can do the same job.
Can anyone identify the kind of steel rod in the picture? This was the stuff that was supplied by the Italian engineer.
I really like the appearance of it, I've tried using copper coated welding rod but it just looks like welding rod!

Diameter is 2.4mm (3/32 inch). The coating is a kind of brassy colour.
I've searched the internet but found nothing so far.
Theo, Lester, anyone?

Pic attached
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
« Last Edit: March 28, 2015, 11:33:32 AM by Cugiok »
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Steel rod identification - help!
« Reply #2 on: March 28, 2015, 11:48:30 AM »

For brass plated you could try people who interior design.

Or ask Manu

Or anodised aluminium rod.  Should be stiff enough in that thickness
« Last Edit: March 28, 2015, 11:58:13 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Steel rod identification - help!
« Reply #4 on: March 28, 2015, 12:06:59 PM »

Could be the colour balance of the pic, but it looks more like nickel-silver than steel.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Steel rod identification - help!
« Reply #5 on: March 28, 2015, 12:08:55 PM »

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Steel rod identification - help!
« Reply #6 on: March 28, 2015, 12:12:43 PM »

Nope it's mild steel a little harder than a welding rod but still mild steel I think. Stainless is too hard especially when I come to bend it.

It is coated or anodised or something or other.

Trying to save myself a trip back to Italy.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Steel rod identification - help!
« Reply #7 on: March 28, 2015, 12:38:49 PM »

Possibly too obvious, but have you shown it to the Welsh man with the big press? He might take one look at it...
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Steel rod identification - help!
« Reply #8 on: March 28, 2015, 01:30:46 PM »

Possibly too obvious, but have you shown it to the Welsh man with the big press? He might take one look at it...

Yes, he's as clueless as I am.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Steel rod identification - help!
« Reply #9 on: March 28, 2015, 01:35:10 PM »

Model engineering suppliers?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Steel rod identification - help!
« Reply #10 on: March 28, 2015, 01:43:29 PM »

It shouldn't too big a problem. B&Q sell wire for fencing, gardening etc. Easy to bend and approx 2.4 mm. A good SPLATT with a hammer will flatten out the end bit if required.
  Have I missed something? Why the need for a big press?
A blow lamp an anvil and hammer can flatten most things.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Steel rod identification - help!
« Reply #11 on: March 28, 2015, 01:44:29 PM »

Model engineering suppliers?

No luck there so far.
I've ordered some aluminium TIG rods and will try those but I do like that steel.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Steel rod identification - help!
« Reply #12 on: March 28, 2015, 01:47:19 PM »

It shouldn't too big a problem. B&Q sell wire for fencing, gardening etc. Easy to bend and approx 2.4 mm. A good SPLATT with a hammer will flatten out the end bit if required.
  Have I missed something? Why the need for a big press?
A blow lamp an anvil and hammer can flatten most things.

These are exposed pallets on my one-row Clippers. The big hammer job looks crap. So does galvanised fence wire.
The hydrailic press gives a smooth and uniform finish which is what my customers expect.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Steel rod identification - help!
« Reply #13 on: March 28, 2015, 01:49:07 PM »

... a smooth and uniform finish which is what my customers expect.

*bites tongue*
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Steel rod identification - help!
« Reply #14 on: March 28, 2015, 01:50:40 PM »

HA, got it. Didn't realise they were on view.  :|bl
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Steel rod identification - help!
« Reply #15 on: March 28, 2015, 01:51:36 PM »

Shut it, Bebb  :P
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Steel rod identification - help!
« Reply #16 on: March 28, 2015, 01:53:04 PM »

ooooooh!  ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Steel rod identification - help!
« Reply #17 on: March 28, 2015, 02:23:22 PM »

Have you asked Monsieur Pariselle?
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Steel rod identification - help!
« Reply #18 on: March 28, 2015, 04:24:52 PM »

Nope it's mild steel a little harder than a welding rod but still mild steel I think. Stainless is too hard especially when I come to bend it.

It is coated or anodised or something or other.

Trying to save myself a trip back to Italy.

Does the new batch HAVE to be steel? Could you not use another equally durable metal?  Just a thought......

Graham

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Steel rod identification - help!
« Reply #19 on: March 28, 2015, 05:20:13 PM »

There's feisty now, boyo.

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal