Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New Hohner HA114 in D  (Read 3698 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
New Hohner HA114 in D
« on: April 08, 2015, 10:35:32 PM »

After much deliberation, I decided to purchase a new Hohner 4-stop HA114 in the key of D.  I've already owned a HA113 in C and so am familiar with this particular model.  I began playing it straight out of the box and thought it sounded absolutely wonderful! I am quite happy with it, although I did notice a few things that I did not like...

I noticed that the lowest note on the treble side, on only one of the stops (one of the two middles), has a slight "rattle" to it, mostly on the pull.  It's an extra low note that I don't usually hit, but for a brand new instrument it grieved me a little to have an issue with it.  Yes, I do realize these Hohners are now Chinese made and so quality is sometimes questionable.  What I'd like to know is if anyone knows what this rattle may be, and what can be done to fix it?  I live in Canada and the instrument was shipped from the U.S...I paid an arm and a leg for customs charges, so I'd really rather not have to ship back an otherwise perfectly good instrument.  I've done minor repairs and adjustments on my other accordion, but never tampered with the reeds.  Anyone have any ideas?

The other thing that I noticed that I don't like is the bellows only have 14 folds (16 if you count the ones on either end), as compared to 17 (or 19, again, depending on how you count) that I have on my HA113.  It's not an issue on many songs, but on some where there is considerable more pull or push I find myself running out of room.  I am seriously considering buying a different set of bellows on installing them instead.  Anyone have any suggestions on which bellows to buy and where? And which would fit my melodeon?  I guess then there's the issue of gluing the bellows onto the frames.  Never done this, have no idea what I'd be doing...Would it be possible for me to do this?  The only accordion technicians near me are about two or three hours away and I would have to ship my accordion to have work done on it...would like to do it all myself if possible.

Thanks for any advice!  I'll keep browsing the forum for answers in similar threads.
Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: New Hohner HA114 in D
« Reply #1 on: April 08, 2015, 10:57:10 PM »

The 'rattle' you describe sounds like a bit of valve noise, especially if it is a transient noise which occurs on a bellows direction change. For some reason pull notes sometimes seem to be a bit more prone to it. As your instrument is new, wait and see if it settles down in a while. If not then it might be worth replacing the valve.

As for the number of bellows folds, I suspect again that the instrument needs a bit of playing in - new HA114 bellows are notorious for being stiff to begin with; they should become easier and the response of the reeds may improve slightly. To ease stiff bellows, try holding the bellows over your knee one side at a time and use your fingers to stretch each fold out, easing it open a bit at a time to its maximum resistance. Repeat all the way round and for each fold. The bellows as supplied should be quite adequate for the HA114 with without running out of air. Have patience. Perhaps it will help guide you to better air-management.

Replacing bellows is not ever such a difficult task but it's not trivial either and I would only recommend this as a last resort and only then when everything has been thoroughly played in.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: New Hohner HA114 in D
« Reply #2 on: April 09, 2015, 09:26:50 AM »


It's not an issue on many songs, but on some where there is considerable more pull or push I find myself running out of room.  I am seriously considering buying a different set of bellows on installing them instead.  Anyone have any suggestions on which bellows to buy and where? And which would fit my melodeon?  I guess then there's the issue of gluing the bellows onto the frames.  Never done this, have no idea what I'd be doing...Would it be possible for me to do this?

as Steve said ''rattle '' most likely from the valve as Hohner uses plastic valves on low reeds too...I'm sure it is still on sale- I've seen new HA 114 bellows German made with red-gold & silver type  Hohner outlet shop @ US eBay with frame ready to fit..have a look at US eBay try to find Hohner's eBay shop..I wanted to buy a few for my self but they would not send it UK  :-\ 
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: New Hohner HA114 in D
« Reply #3 on: April 09, 2015, 09:32:53 AM »

here is the link;
  http://www.ebay.com/itm/Original-HOHNER-Accordion-Bellows-with-Frame-280X150mm-for-HOHNER-HA-114-One-Row-/331462143821?pt=LH_DefaultDomain_0&hash=item4d2caeef4d
I've asked but they could not send it to UK however they did ask if I knew any one in US so they can help with the postage..I don't know any one in US to help  :-[
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: New Hohner HA114 in D
« Reply #4 on: April 09, 2015, 09:40:27 AM »

The rattle on the lowest reeds is as others have said most likely valve noise.  If it doesn't go away with use then to fix it you will need to remove the reed plate, replace the valves on both sides and then wax the plate back into place. The low reeds on a 114 are face away from the other block, so access to the reed is good. Use leather replacements for least noise.
Bellows replacement will be a big cost.  If going to the trouble and expense I would get a set made in Italy from either of the two main makers, Galassi, or Marconi. They are much better quality than Hohner and also cheaper!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: New Hohner HA114 in D
« Reply #5 on: April 09, 2015, 10:06:55 AM »

Hohner bellow on the link on sale for $80-US free postage to US + comes with frame ready to fit& play  ;)  please note; I have NO connection to the seller  :||: I've searched for smaller size new bellow all around the world as Theo said cheapest was Italian maker Marconi 110 euros + PP work around 150 euros in total.     
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: New Hohner HA114 in D
« Reply #6 on: April 09, 2015, 10:45:11 AM »

But that is a standard Hohner 114 bellows, same number of folds, so no advantage there.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: New Hohner HA114 in D
« Reply #7 on: April 09, 2015, 12:43:18 PM »

I'm at work now  ;D can not count the folds on my older silver/grey 114 now, wasn't it 14+2  and than hohner reduced down to 12+2 on the new ones? how many folds do we have on older 114 bellow? good thing they didn't send to UK than I would have ended up useless new bellows again  :-[  I have Italian made new bellow 1.5 cm longer did not fit any of my boxes  :-\   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: New Hohner HA114 in D
« Reply #8 on: April 09, 2015, 12:48:57 PM »

  :-[  I have Italian made new bellow 1.5 cm longer did not fit any of my boxes  :-\

I have had many Italian bellows and they have always been perfect to the measurements I sent.  You can't tell them "make me a bellows for a Hohner 111"   You must give detailed measurements: length, width, fold width, colours, corner shape, number of folds.  They even provide measurement charts to show what is required - Galassi chart attached for example. If you have provided the correct measurements but they make the wrong size they should replace.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: New Hohner HA114 in D
« Reply #9 on: April 09, 2015, 02:00:29 PM »

the bellow did not fit wasn't from a maker, I have Marconi 's ''modulo'' for measurement and they are all very professional people no problem there Theo. bigger bellow was actually from a mel net member and it turned out 1.5 cm longer than what he measured originally, it wasn't made to measure by a maker... and available if any one needs a new unused - unframed smaller Italian made bellow  @ cost price  :D    I have ordered & revived new bellows from Marconi and fits like a glove  :||:   
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: New Hohner HA114 in D
« Reply #10 on: April 09, 2015, 04:16:28 PM »

new HA114 bellows are notorious for being stiff to begin with;

only the new ones, then?... >:E :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: New Hohner HA114 in D
« Reply #11 on: April 27, 2015, 05:30:14 PM »

You may want to check, but many Weltmeister melodeons have the same bellows measurements as Hohner and tend to be better made (real bellows tape) and have color options. Prices seem to generally be better too.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal