Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows re-taping  (Read 1791 times)

0 Members and 1 Guest are viewing this topic.

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Bellows re-taping
« on: April 19, 2015, 07:37:28 PM »

I need to re-tape some bellows on an old Hohner . Is it important to remove all the old tape , or is it okay just too remove any loose bits and tape over the rest of the old tape .
Also what glue would I use to fix new bellows corners in place .
 Many thanks in advance  for any advice  .
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows re-taping
« Reply #1 on: April 19, 2015, 07:42:19 PM »

There has been lots of previous discussion of this. A standard search for "bellows tape" with quotation marks will get you started.
« Last Edit: April 19, 2015, 07:44:50 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows re-taping
« Reply #2 on: April 19, 2015, 07:53:57 PM »

If you have 24 minutes of your life to spare

https://www.youtube.com/watch?v=UwQ1ZCbmNq8

Personally I would always strip all the old tape otherwise you will not be happy with the finished job.
I use evo-stik contact adhesive to refit corners

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: Bellows re-taping
« Reply #3 on: April 19, 2015, 08:00:22 PM »

Cheers  , looks like a job for a wet  weekend , or two .
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows re-taping
« Reply #4 on: April 19, 2015, 10:21:01 PM »

And if at all possible don't remove the metal corners. Originally they are usually just crimped on, not glued.  Just remove and replace loose or broken corners, and use a little glue and very gently squeeze them to a snug fit.  Personally would use pva, not evo stick.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: Bellows re-taping
« Reply #5 on: April 19, 2015, 11:09:58 PM »

No , there are just two missing corners to replace that someone has repaired using tin foil to fashion new corners from and under that some horrible sticky tape .
Logged

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: Bellows re-taping
« Reply #6 on: April 20, 2015, 06:09:44 PM »

I have removed the foil and tape underneath , which were the makeshift bellows corners.
These have separated and leak air on the corners . should I put a bit of PVA in and glue bellows together before fixing new corners .
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Bellows re-taping
« Reply #7 on: April 21, 2015, 10:29:47 AM »

I  like using hot hide glue when re-gluing original bellows tape to old melodeons if used initially. Otherwise, I use a pva glue which remains water soluble and flexible after drying. I also use this to glue bellows to the frames.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal