Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Lowering Button Height  (Read 7089 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lowering Button Height
« Reply #20 on: April 27, 2023, 10:19:56 PM »

Carini sell them €72 + VAT + delivery.

I made mine out of an old pair of side cutters



Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Lowering Button Height
« Reply #21 on: April 27, 2023, 10:25:56 PM »

Carini sell them €72 + VAT + delivery.

I made mine out of an old pair of side cutters

I like the Carini ones, but I like yours better  ;D ;D ;D
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Lowering Button Height
« Reply #22 on: April 27, 2023, 10:48:47 PM »

I don't understand how this special tool is used.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Lowering Button Height
« Reply #23 on: April 27, 2023, 11:50:53 PM »

It looks as if it puts single indentations along one side of the plate lever, thus spreading it out, making that side longer than the other; hence bending the lever.
I suppose working the edge with a hammer would produce a similar result, for a butcher like me, but it might prove difficult to keep it flat as well.
« Last Edit: April 27, 2023, 11:55:14 PM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lowering Button Height
« Reply #24 on: April 28, 2023, 08:08:16 AM »

Winston is correct.  Spreading the metal on one edge of the lever.
You have to do the adjustment with the lever in situ, so I think the hammer idea is not going to catch on.

If the pallets don’t need to be changed then it’s important to do the adjustment on the keyboard side of the lever.  If you adjust the pallet side you risk disturbing the geometry of the pallet resulting in air leaks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Lowering Button Height
« Reply #25 on: April 28, 2023, 08:39:50 AM »

Ah, I see. Thank you.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Lowering Button Height
« Reply #26 on: May 01, 2023, 03:08:43 PM »

I think what's being discussed is covered here.  Words like "It's easy to do but (like many melodeon-related jobs) just needs a bit of care" make it sound like this is beyond me, I might just try the new keyboard cover approach first.

When a cigar cutter shaped was brought up I immediately assumed it was for chopping buttons in half.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Lowering Button Height
« Reply #27 on: May 01, 2023, 04:09:37 PM »

Usually just holding down the pallet firmly against the ‘soundboard’ while gently pushing down on the corresponding button does the trick.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lowering Button Height
« Reply #28 on: May 01, 2023, 05:30:16 PM »

Usually just holding down the pallet firmly against the ‘soundboard’ while gently pushing down on the corresponding button does the trick.

That certainly works with most Hohners with steel levers, because use the way they are made includes a fold over at the axle which facilitates bending.  Many Italian aluminium levers don't bend so easily.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Lowering Button Height
« Reply #29 on: May 01, 2023, 08:48:09 PM »

Usually just holding down the pallet firmly against the ‘soundboard’ while gently pushing down on the corresponding button does the trick.

That certainly works with most Hohners with steel levers, because use the way they are made includes a fold over at the axle which facilitates bending.  Many Italian aluminium levers don't bend so easily.

Yes, that’s true - the rigid aluminum levers don’t bend as easily.
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Lowering Button Height
« Reply #30 on: May 21, 2023, 07:52:02 AM »

The pinching tool Theo made reminds me of the tools I got from a typewriter shop that closed down. There are several serious tools that were used for repairing typewriter keys and they were made for bending steel. https://www.ebay.com/itm/234877947716 apparently they are actually worth money.

I use them for making replacement key arms for the norteno players. They hammer on the keyboards and actually break the arms. This partially aggravated by the arms having a sharp angle on the inside of the elbow and not a small curve. all the stress causes a crack to develop there.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Lowering Button Height
« Reply #31 on: November 27, 2023, 04:45:21 PM »

Carini sell them €72 + VAT + delivery.

I made mine out of an old pair of side cutters

I'm not sure how you made these from side cutters...did you file or grind down the cutting edges (so that they no longer came together when closed) and then reshaped the tip or...?  I could really use a tool like this but hoping I can make one myself rather than dishing out the >$100...
« Last Edit: November 27, 2023, 05:13:11 PM by mselic »
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lowering Button Height
« Reply #32 on: November 27, 2023, 04:58:42 PM »

That’s exactly how I made mine.  I had an old blunt pair, but you could buy a cheap pair and do the same.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Lowering Button Height
« Reply #33 on: August 11, 2024, 04:14:34 PM »

I had the button height lowered on my Boxern (Italian parts assembled in the States).  But now the buttons are at an angle.  On the inner side I think they're just as high as they were originally....not what I'd hoped for.  Can that be rectified?  I suggested taking a belt sander to the high spots...
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal