Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fitting shoulder strap brackets to Erica  (Read 2826 times)

0 Members and 1 Guest are viewing this topic.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Fitting shoulder strap brackets to Erica
« on: May 04, 2015, 09:54:34 AM »

I have just bought a (German built) Hohner Erica which does not have (has not had) any shoulder strap brackets. Charlie Marshall's website offers various brackets - http://www.cgmmusical.co.uk/CGM_Musical_Services/Strap_Brackets.html.
Which ones do I need for my Erica; I will be using two straps?

What is the best way to locate where they should be fitted on the box?

And how should I make the holes for the screws through the virgin celluloid?

Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fitting shoulder strap brackets to Erica
« Reply #1 on: May 04, 2015, 10:52:06 AM »

It doesn't make a lot of difference which you use.  They all stick out a bit and take up more room in the case.  If you have a very tight space then the two of the single brackets may project the least distance.   

Make a pilot hole with a bradawl or a 1/16" drill nothing bigger or the screws may not grip so well.  The wood is quite soft.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Fitting shoulder strap brackets to Erica
« Reply #2 on: May 06, 2015, 08:08:37 PM »

Thanks, Theo.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Fitting shoulder strap brackets to Erica
« Reply #3 on: May 06, 2015, 10:59:09 PM »

I thought Sandy was asking about the bracket position on the melodeon. Lester has some modest experience at this, although he likes a funny strap position for playing.  >:E I will try to remember to photograph mine, if that helps.

Charlie should be able to advise on selection of brackets,
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Fitting shoulder strap brackets to Erica
« Reply #4 on: May 06, 2015, 11:24:01 PM »

Yes, a photo of a conventionally placed two-strap bracket on an Erica would be really useful. Thanks.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Fitting shoulder strap brackets to Erica
« Reply #5 on: May 06, 2015, 11:39:02 PM »

Here goes:
The bracket is about central, with the bottom edge about 15mm to 18mm from the edge. Seems OK.
« Last Edit: May 06, 2015, 11:40:42 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Fitting shoulder strap brackets to Erica
« Reply #6 on: May 07, 2015, 09:32:09 AM »

Thanks, Malcolm, that should be a good guide.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal