Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Sanding a pokerwork  (Read 3591 times)

0 Members and 1 Guest are viewing this topic.

daveyaaa

  • Member
  • *
  • Offline Offline
  • Posts: 22
Sanding a pokerwork
« on: May 04, 2015, 01:23:07 PM »

Cant stand the black/gold pokerwork finish so I thought I'd sand it down. Blinkin' eck it's hard work. Still left with some bits of black stuck in the grain so anyone got any ideas on shifting. Wire wool and some sort of solvent or just more sanding? Halfway through the sanding I realised I could get a sort of distressed finish if I was careful with the sandpaper. Looks like the sort of thing you'd pay a load of money for from the Fender custom shop. Not to everyones taste but would have saved a lot of sanding.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Sanding a pokerwork
« Reply #1 on: May 04, 2015, 02:28:22 PM »

Ho Ho, my dear departed step father was a paint sprayer for BAC ( British aircraft Corporation) I asked him to re spray my Pokerwork in BAC aircraft paint in black. The resulting job was fantastic even after its dunk in the river Sid. Everything collapsed except the paint which lasted for years hung on the fence.

However he did say what a swine it was removing the original finish. He said it was a heat finish pressed onto the frame including a transfer and the only way he could remove it was by sandblasting. :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Sanding a pokerwork
« Reply #2 on: May 04, 2015, 04:08:29 PM »

Cant stand the black/gold pokerwork finish so I thought I'd sand it down.
:-X
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Sanding a pokerwork
« Reply #3 on: May 04, 2015, 04:13:04 PM »

Take it apart, and put it through a planer.

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sanding a pokerwork
« Reply #4 on: May 04, 2015, 04:38:02 PM »

Just take off all the brackets,screws and the metal corners, and do it on a belt sander.

Or just spray paint it black.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Sanding a pokerwork
« Reply #5 on: May 04, 2015, 05:12:35 PM »

Or just spray paint it black.

Or blue, or....
Logged
Tuner/repairer, now retired.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Sanding a pokerwork
« Reply #6 on: May 04, 2015, 06:36:23 PM »

Or just spray paint it black.

Or blue, or....
Very pretty. What did you use on the fingerboard, if that's not a closely guarded secret? (or even if it is, come to think of it  ::) )
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Sanding a pokerwork
« Reply #7 on: May 04, 2015, 06:40:03 PM »

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sanding a pokerwork
« Reply #8 on: May 04, 2015, 07:08:56 PM »

Here's one I prepared earlier
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Sanding a pokerwork
« Reply #9 on: May 04, 2015, 07:33:51 PM »

Here's one I prepared earlier

You should put a Blue Peter badge on it Theo...

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Sanding a pokerwork
« Reply #10 on: May 04, 2015, 07:35:15 PM »

Nice custom paint jobs!
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sanding a pokerwork
« Reply #11 on: May 04, 2015, 07:36:40 PM »

And the finished box.  It was originally red.

Sorry red badge, not Blue Peter!
« Last Edit: May 04, 2015, 07:38:17 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Sanding a pokerwork
« Reply #12 on: May 05, 2015, 11:28:53 AM »

What did you use on the fingerboard, if that's not a closely guarded secret? (or even if it is, come to think of it  ::) )

Black, but for no good reason that I can think of, other than that was the original colour.

Logged
Tuner/repairer, now retired.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Sanding a pokerwork
« Reply #13 on: May 05, 2015, 11:32:19 AM »

What did you use on the fingerboard, if that's not a closely guarded secret? (or even if it is, come to think of it  ::) )

Black, but for no good reason that I can think of, other than that was the original colour.

LOL I wasn't clear - was enquiring about type of paint  :|bl I have a box with a very tatty but otherwise sound wooden keyboard. I had been looking at hard wearing lacquers, but was just interested in what you used.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Sanding a pokerwork
« Reply #14 on: May 05, 2015, 12:25:22 PM »

My step dad did something peculiar (apart from marrying widowed mum) he painted it and then stuck it in some industrial oven. As I said the paint job lasted for years and outdoors all that time. :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

brazilian.BOX

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 416
  • youtube search: 8 baixos
Re: Sanding a pokerwork
« Reply #15 on: May 05, 2015, 02:53:16 PM »

Or just spray paint it black.




Reaaaaally nice Lester! Congratulations.
Specially the bellow, it seems really high quality.  :D
Logged
The Brazilian chromatic tuning: www.youtube.com/watch?v=HwLF1tH3q5Y

daveyaaa

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: Sanding a pokerwork
« Reply #16 on: May 05, 2015, 03:27:34 PM »

Lesters Penguin was on my mind when I started sanding. I was just hoping it would look ok and not need painting. I don't have a planer or a belt sander or the experience of using them to avoid expensive firewood. So it looks like the rattle can wins. One more question...I presume I'll need a can of undercoat as well?
Logged

Matthew Rickard

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • Living & learning. Otherwise you'd just be living.
    • Red Cuthbert Morris
Re: Sanding a pokerwork
« Reply #17 on: May 05, 2015, 03:46:06 PM »

Reeeeeeeally please to see this thread... I've just bought a Student 1 PA to do a melodeon conversion and the box carcus is going to get a whole lot of work done! Great to get inspiration.

Bad news for Lester though as I'm sure I'll be contacting him every 5 minutes for hints and tips.
Logged
Dino Baffetti Binci DG - Hohner Erica CF - Serenellini Lady DG
Red Cuthbert Morris
Bedfordshire Beginners' Melodeon Playgroup

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Sanding a pokerwork
« Reply #18 on: May 06, 2015, 04:56:56 PM »

What did you use on the fingerboard, if that's not a closely guarded secret? (or even if it is, come to think of it  ::) )

Black, but for no good reason that I can think of, other than that was the original colour.

LOL I wasn't clear - was enquiring about type of paint  :|bl I have a box with a very tatty but otherwise sound wooden keyboard. I had been looking at hard wearing lacquers, but was just interested in what you used.

Sorry, Malcolm B, that was a silly answer in hindsight.

I use a wood primer/sealer, then a Holts auto paint grey primer followed by umpteen light coats of Holts auto paint, both in spraycans  Seems to be relatively hard wearing.

And it comes in lots of different colours if you really want to be daring....



Logged
Tuner/repairer, now retired.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal