Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Polishing hohner buttons  (Read 2112 times)

0 Members and 1 Guest are viewing this topic.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Polishing hohner buttons
« on: May 05, 2015, 09:44:41 AM »

Hello there,

I have several old Hohners from the 1930s which have great reed responses and good fast actions, however I struggle to play triplets on them because time and wear has made the buttons dull and sticky feeling under my fingers.  I can only assume that this is due to microscopic scratches and pitting on the surface of the buttons.

The buttons are made of some kind of hard plastic / celluloid type material (more substantial stuff than a modern pokerwork) - does anyone know a preferred technique for getting a really slippery feeling polished finish?

Another reason the buttons are not giving great performance is that they have quite a sharp edge to them which again I would like to smooth off to a more rounded button - which feels like it may be quite a delicate and major operation!  Again any advice from people who have attempted things like this before would be much appreciated!

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Polishing hohner buttons
« Reply #1 on: May 05, 2015, 10:30:03 AM »

Most of the 1930s Hohner buttons are made of casein, a sort of plastic material made from milk protein. With exposure to light, air and finger grease the surface degrades and can even get to the point of having a clearly visible crazed surface.  I have an old Hohner club that I have played a lot and the most played buttons are now nicely polished just from use.   I doubt you want to spend a few years just playing an old Hohner or two so what else is possible.   I believe that to mechanically polish the buttons you would have to first remove the buttons from the levers, then spend some hours with buffing wheels starting with coarse to remove the degraded surface layer, then working through the grits to get a good polish.  This sounds like too much effort too!  You could also replace the buttons.  If you can find some of the nice rounded buttons that Hohner made in the 50s/60s/70s then it is straightforward to swap them.   There are also Italian buttons of the correct size that can be used, but the ones I've seen need to have a hole drilled in the underside to take fit onto the Hohner lever.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike-T

  • Good talker
  • **
  • Offline Offline
  • Posts: 90
  • 1930s Hohner B C C#, D/GAcc Benny, 2.5 Beltuna
Re: Polishing hohner buttons
« Reply #2 on: May 05, 2015, 12:52:38 PM »

Hi guys, on the topic of buttons, can anyone please tell me how to remove them easily?.  If it is an easy job then i,ll have a few decent spares  for Squeezy .
regards
Mike
Logged

brazilian.BOX

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 416
  • youtube search: 8 baixos
Re: Polishing hohner buttons
« Reply #3 on: May 05, 2015, 01:35:43 PM »

Most of the 1930s Hohner buttons are made of casein, a sort of plastic material made from milk protein. With exposure to light, air and finger grease the surface degrades and can even get to the point of having a clearly visible crazed surface. 

Thanks Theo, very useful information. So that's the reason why some Hohner buttons (of the older models) they pass from a white color for a totally YELLOW color?
Logged
The Brazilian chromatic tuning: www.youtube.com/watch?v=HwLF1tH3q5Y

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Polishing hohner buttons
« Reply #4 on: May 05, 2015, 01:47:56 PM »

Yes that's right, sometimes even brown colour.
I think when new they were not as white as the buttons Hohner make now.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

brazilian.BOX

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 416
  • youtube search: 8 baixos
Re: Polishing hohner buttons
« Reply #5 on: May 05, 2015, 02:07:35 PM »

Yeah, take a look please

http://www.ebay.com/itm/Knopf-Akkordeon-Hohner-Club-III-BS/221742147882?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D30766%26meid%3D42418ab7493e4e76b8d45de62bc78cf7%26pid%3D100033%26rk%3D4%26rkt%3D4%26sd%3D171772474471


I am talking exactly about it... we see some models like these with the buttons really white, but some of them carry very yellow buttons.
It happened in my vintage Erika 1935 also... the buttons got a little brown.
Logged
The Brazilian chromatic tuning: www.youtube.com/watch?v=HwLF1tH3q5Y

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: Polishing hohner buttons
« Reply #6 on: May 06, 2015, 05:39:40 PM »

Hi Squeezy,
From an earlier post.

Your old Hohner buttons can be brought back almost to their original condition but it does take a bit of effort.  I've just finished refurbishing the buttons on a Club 1 and during the process I've tried most of the solvents and polishes.  Most of the buttons were badly stained with their colour their ranging from light brown to almost black and in many cases the surfaces were badly crazed.  As mentioned elswhere you need to use some form of abrasive to cut back the damaged surface and you need to keep the abrasive as light as possible to cut down on the polishing effort later.  I've used 1200 grit wet and dry or paint colour restorer (like T Cut) with some success.  More recently I've found scotchbrite pads very effective.  Once you are back to the base material you need to polish the surface to get rid of the abrasion marks and paint colour restorer seems to work well for this (it also produces excellent results on the plastic treble keyboard).  You need to be able to get good access to the buttons for this process and trying to do them in situ would be almost impossible.  As I was dismantling the mechanism anyway I was able to deal with each button in turn and in fact you may find it easiest of all if you prise the buttons off the levers (quite easy to do with a knife although the base end will need the levers removed first to get access to the bottom of the buttons).  This also allows you to turn the buttons 180 degrees when you put them back, to even up the wear.  To get a decent finish takes time to achieve and I would estimate at least one hour of vigorous polishing will be required for each button.  The reward is seeing you face in a mirror like finish on the surface off each item and this also helps to take your mind off your sore and bleeding fingers. 

Good luck!

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal