Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: High AE reed not sounding  (Read 1496 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
High AE reed not sounding
« on: May 06, 2015, 10:31:32 AM »

Hi,
I have a high AE reed that sounds on the tuning table, out of the reed block, but when in the reed block the high A won't sound. It's twin reed on the other side of the block does sound.
There was a putty baffle but it broke up. I've tried putting in another baffle of about the same size but this doesn't help. Also tried it in the case with bellows etc. but still can't get the A to sound. As I say, it works fine on the tuning table. So must be something to with pressure?
Anyone got any ideas, other than try another reed...which is what I'll be doing next I suppose...
Should add it doesn't have valves...it's the last high reed...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: High AE reed not sounding
« Reply #1 on: May 06, 2015, 10:38:07 AM »

Fair bet that it is choking. Was there a small bypass hole in the wax when you removed the reed, they are there to reduce the pressure on the highest reeds. I just poke a 1/8 drill through the wax and the edge of the block to create the bypass.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: High AE reed not sounding
« Reply #2 on: May 06, 2015, 10:40:53 AM »

You think so? Ok I'll try that. Though there weren't any holes ( it's a Liliput) The only time I've seen holes drilled is on a Scarlatti. Thanks Lester. I'll let you know how I get on. Interesting thing is that the other side works fine. At some point someone has been a bit heavy with a Dremel on this particular reed tongue so it's weaker in the middle than the other one...maybe that's why it's choking..

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: High AE reed not sounding
« Reply #3 on: May 06, 2015, 05:54:33 PM »

That does sound as if the dremel user has ******ed the reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: High AE reed not sounding
« Reply #4 on: May 06, 2015, 08:37:39 PM »

(:) definitely not me...
Lester's suggestion worked. I cut a small slot in the top of the reed block and replaced the baffle. This seemed to fix it.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal