Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Waxing chord reeds  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Waxing chord reeds
« on: May 27, 2015, 04:14:28 PM »

Another dumb question.  The chord reeds on my project box come in a combination of single, double and triple plates (i.e. 2, 4 or 6 reeds per plate). However the block has partitions for each in/out pair of reeds.  Is it necessary to seal the partitions that fall under the double and triple plates, and if so, is there a trick ?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Waxing chord reeds
« Reply #1 on: May 27, 2015, 04:24:26 PM »

It's not a dumb question at all. I have never actually re-waxed the wide reed plates you have described, so I will be interested in hearing the advice from others.

However, it is essential that the individual reed chambers are sealed and isolated from each other, otherwise there will be air leakage from one chamber to another and you will get extra, false, notes sounding when a single button is pressed.

On your project box, were the reed plates originally nailed or screwed into place on leather gaskets, rather than waxing? That would probably have been sufficient to make a proper seal between chambers.

If waxing, my initial feelings would be to run a bead of wax along the top of the chamber walls and press the reed plate into place while the wax is still soft. Then complete the waxing at the ends and exposed sides. But what do others say? Theo, Lester?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing chord reeds
« Reply #2 on: May 27, 2015, 06:07:32 PM »

If the reeds are part if the same chord then sealing between them won't be critical. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Waxing chord reeds
« Reply #3 on: May 27, 2015, 07:25:50 PM »

If the reeds are part if the same chord then sealing between them won't be critical.
Yes - good point, Theo!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Waxing chord reeds
« Reply #4 on: May 27, 2015, 09:00:48 PM »

Won't there then be an double accoustic linkage between the reeds?

  1. Mechanical, through the plates and block "as ever"
  2. Air bourn, via the air pressure linkage

Not a clue how all that might interact, and I wouln't take it for granted. But presumably it works?
Logged
  _       _    _      _ 

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Waxing chord reeds
« Reply #5 on: May 27, 2015, 09:39:11 PM »

Yes it was originally a wax job.  Of course when dismantling I didn't notice if there was wax on the 'underplate' partitions  :-[

2 reeds of a triple plate and 1 reed from the triple plate opposite on the block are used to form a chord, so sealing would be required, I guess.
 
Quote
If waxing, my initial feelings would be to run a bead of wax along the top of the chamber walls and press the reed plate into place while the wax is still soft. Then complete the waxing at the ends and exposed sides.

I was thinking along those lines too...
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Waxing chord reeds
« Reply #6 on: May 27, 2015, 09:43:17 PM »

The acoustic linkage between reeds has been much discussed, but it's only a problem when the two reeds are tuned a few cents apart for tremolo tuning, and start erratically trying to pull into sync with each other. On chords the reeds are at widely differing pitches, so I doubt that coupling will have any audible effect.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal