Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air supply for reed tuning  (Read 1620 times)

0 Members and 1 Guest are viewing this topic.

Dave Sawdon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
Air supply for reed tuning
« on: June 03, 2015, 10:32:21 AM »

I need to make a tuning table and am wondering whether anyone can recommend a suitable air pump, or whether I need to use the bellows.
I've been meaning to make one for a while but recently picked-up an ancient single row German melodeon (the sort with brass "horns") which seems to be tuned to A429 rather than A440.

Dave
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Air supply for reed tuning
« Reply #1 on: June 03, 2015, 10:45:21 AM »

I would always recommend bellows for the following reasons

  • You can vary the air pressure which is important when setting up reeds
  • Fans/pumps can deliver air that is not 'smooth' thus causing interactions with the tuning. (I once played my concertina under a ceiling fan and it sounded as if it had gone flat
  • Pumps and fans are noisy

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Air supply for reed tuning
« Reply #2 on: June 03, 2015, 10:47:35 AM »

Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Dave Sawdon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
Re: Air supply for reed tuning
« Reply #3 on: June 03, 2015, 03:22:26 PM »

Thanks to both - it looks like I need to find myself some old bellows.
(That's a useful video, BTW).
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Air supply for reed tuning
« Reply #4 on: June 03, 2015, 04:54:28 PM »

Thanks to both - it looks like I need to find myself some old bellows.
(That's a useful video, BTW).

There are plenty about; loads of ancient PAs well past saving but with usable bellows. I paid a fiver for the one I dismantled to make my tuning bellows, and harvested a bunch of reeds and other useful bits & pieces into the bargain.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Air supply for reed tuning
« Reply #5 on: June 04, 2015, 05:43:23 AM »

You can use the bellows from the melodeon with the reeds you wish to tune. Just remove the ends and make alternate covers for the bellows. Most of the old one row German melodeons which I repair, have end plates which are attached with two or four screws, rather than the newer style pins.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Air supply for reed tuning
« Reply #6 on: June 04, 2015, 06:12:25 AM »

You can use the bellows from the melodeon with the reeds you wish to tune. Just remove the ends and make alternate covers for the bellows. Most of the old one row German melodeons which I repair, have end plates which are attached with two or four screws, rather than the newer style pins.

You can indeed, but I prefer to have a separate set-up to avoid constant removal and refitting of the instrument's own bellows. Also it's an advantage to use a bigger bellows than the melodeon's own, as it delivers more air per stroke, so you aren't continually having to refill with air.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Air supply for reed tuning
« Reply #7 on: June 04, 2015, 09:36:26 PM »

That is a great youtube link, Cugiok. It is interesting even for those who may only want to know more ab out the process. thanks for sharing that with us. Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Air supply for reed tuning
« Reply #8 on: June 05, 2015, 11:47:40 PM »

Not sure about the fellows use of a Dremel, in the video. its a fast way to wreck the reeds, not a fast way to tune.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal