Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tuning reed plates (rather than individual reeds)  (Read 4905 times)

0 Members and 1 Guest are viewing this topic.

Dave Sawdon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
Tuning reed plates (rather than individual reeds)
« on: June 09, 2015, 03:36:56 PM »

I recently picked-up an ancient German single row that is more-or-less in tune with itself (D) but seems to be set at around A429 - it's not worth very much but I'd like to change it to A440 so, with the team's support, will need to convert a few unknown unknowns to known knowns.
When I opened it up I expected to see a nice array of individual reeds, but they're all on one plate. The plate is going to complicate the interface to the tuning box so I wanted to ask how others tackle these boxes?

Dave
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning reed plates (rather than individual reeds)
« Reply #1 on: June 09, 2015, 03:53:01 PM »

If the reed blocks are removable then you can do it the same as a block with separate plates.  Most likely the blocks are glued in, in which case you will need to learn the technique for tuning in the box. 
« Last Edit: October 13, 2016, 10:46:13 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Tuning reed plates (rather than individual reeds)
« Reply #2 on: September 11, 2016, 07:12:18 PM »

Is there some place on internet  (youtube ? )  were I can see someone tuning with the reeds in the box?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning reed plates (rather than individual reeds)
« Reply #3 on: September 11, 2016, 08:47:13 PM »

Watching  videos on youtube won't be very helpful. Most of them should never have been uploaded in the first place, as the only thing you will learn from them is how to efficiently ruin an accordion.
Even if it's not rocket science it  still takes many years to learn how to tune.
If I were you I'd leave this job to an expert, especially if the reeds are in brass, in which case they are notoriously tricky to deal with.
« Last Edit: September 11, 2016, 10:08:33 PM by diatonix »
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Tuning reed plates (rather than individual reeds)
« Reply #4 on: September 11, 2016, 10:39:15 PM »

I know.  I am not tuning anything.  (well, hmmm  -   guitars  -  )

 I have seen some of the videos.

But  -    I have been reading that some of this parish do their final tuning inside the boxes, -  and I just want to see how they do it.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning reed plates (rather than individual reeds)
« Reply #5 on: September 11, 2016, 10:44:28 PM »

Smoke and mirrors, Stockaryd, smoke and mirrors. It's a "Dark Art", methinks!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning reed plates (rather than individual reeds)
« Reply #6 on: September 11, 2016, 11:40:28 PM »

If tuning is "Dark art" then dentistry is too, and so is glassblowing and watchmaking. It's quite simply something where you have to invest some time and effort in acquiring the necessary skills.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning reed plates (rather than individual reeds)
« Reply #7 on: September 12, 2016, 12:02:02 AM »

Exactly. I worked on nothing more valuable than Hohners for several years when I was learning to tune.  I still recall the feeling of anxiety the first time I was asked to tune a top quality modern box.

And yes tuning the reeds in situ, in the box is essential to get the mist accurate and best sounding result.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tuning reed plates (rather than individual reeds)
« Reply #8 on: September 12, 2016, 12:06:28 AM »

The only justification I can see in tuning an old ancient German single row up to A440 is if you are going to be playing with other people who accept A440 as the norm. Without knowing fuller details of the OP's melodeon, my experience of such boxes is that they are generally not up to that task in terms of build quality, response, volume, dynamics and probably a whole host of other inadequacies.

So why not just keep it for home enjoyment if it aesthetically appeals to you; (I doubt that the Perfect Pitch Police will come knocking at your door when you play in A429) and maybe get something more suitable for sessions, band work, whatever, where A440 is required.

Just one man's opinion....



« Last Edit: September 12, 2016, 12:13:00 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Tuning reed plates (rather than individual reeds)
« Reply #9 on: September 12, 2016, 12:35:31 AM »

Another justification: to practice/learn tuning !  That's exactly how I got started...
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Tuning reed plates (rather than individual reeds)
« Reply #10 on: September 12, 2016, 06:11:37 AM »

 . . . . .    And I just want to see how they do it with the reeds in the box.   . . . .   ;)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tuning reed plates (rather than individual reeds)
« Reply #11 on: September 12, 2016, 09:30:28 AM »

Another justification: to practice/learn tuning !  That's exactly how I got started...

Unless you are intending to make a career of tuning ancient, cheaply made German single row melodeons with gang-mounted reeds, I can think of far better models on which to practice tuning; wrecked piano accordions and Chinese made melodeons with individual reeds mounted on A frames spring to mind as useful candidates! These would put you in much better stead to tune instruments that are worth tuning (meaning no disrespect to the OP or his melodeon). Although the aims and principles are the same, the techniques are quite different, and, dare I say, more difficult and time consuming.

OK, maybe my own technique is lacking somewhat, and it is also likely that different tuners will do things in different ways. Rather than waiting for the definitive (?) video to be posted, I would certainly encourage experimentation, but repairing a bicycle is unlikely to teach you much about servicing a modern automobile.   >:E











Logged
Tuner/repairer, now retired.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Tuning reed plates (rather than individual reeds)
« Reply #12 on: September 12, 2016, 11:34:24 AM »

Hmm . . .   I have two unused accordions in the closet.     (:)   
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: Tuning reed plates (rather than individual reeds)
« Reply #13 on: September 12, 2016, 02:00:08 PM »

Hi Dave. I have one of these in bits on my bench at the moment. Suggest we compare notes are tomorrow's Junction session if you are going  (:)
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning reed plates (rather than individual reeds)
« Reply #14 on: September 12, 2016, 02:12:37 PM »

"but repairing a bicycle is unlikely to teach you much about servicing a modern automobile."

Not according to the RAF, in their recruitment advert on the (other) box.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Tuning reed plates (rather than individual reeds)
« Reply #15 on: September 12, 2016, 04:53:30 PM »

I thuoght it was the RN...

Rob.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning reed plates (rather than individual reeds)
« Reply #16 on: September 12, 2016, 05:35:16 PM »

You could well be right, Rob. I just remember feeling rather annoyed at what was being proposed; I feel quite confidant that when I was repairing my bikes, all those years ago, I was much further away from repairing motors than I was from repairing helicopters when I was an actual motor mechanic. (I thought the RN one was the one which "made" the lad from Carlisle, or somewhere.)
Sorry for drifting, Theo.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Tuning reed plates (rather than individual reeds)
« Reply #17 on: September 13, 2016, 06:03:48 PM »

I have also recently acquired a knackered old one-row with multi-reed plates. I'm fed up of revalving/waxing at the moment though so it's going to be a while before I give it a go ;D

The one instrument I've tuned so far I did entirely in the box, as I don't really have any other way of doing it due to limited tools + space. As much as I've no doubt made a complete pig's ear of it, it wasn't particularly tricky to do. The one-row actually looks a little easier due to the flat-mounted reed blocks. Though I might have to make a smaller lifter to do the really small reeds.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Tuning reed plates (rather than individual reeds)
« Reply #18 on: September 17, 2016, 03:50:00 PM »

Here is the solution I came up with for tuning/analyzing individual reeds on long reedplates. I have made a series of single reed sounding fixtures. Each aluminum cavity is a different size but but using all of them it covers all the different size reeds I have encountered so far. Perhaps not clear in the photos, each metal insert is slightly raised above the wooden surface so that the non-sounding reeds are almost resting on the top but not quite. This allows the sounding reed to seal on the thin metal rectangle but prevents the longplate from tilting and breaking the seal. It took some trial and error to achieve. The second photo shows a longplate in position on my air tuning table. Note the reed nearest the A in A444 is vibrating.

(Air table demo video here: https://youtu.be/un-AvLaCenU)

I totally agree that final tuning must be done with the longplate in the instrument but have found that these are very helpful when shifting all the reeds up or down (in this case from A444 down to A440) or when trouble-shooting a non-sounding or buzzing reed. This longplate is from a Bandoneon with octave reed pairs.

  Scott

BellingersButtonBoxes.com
« Last Edit: September 19, 2016, 12:11:32 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Tuning reed plates (rather than individual reeds)
« Reply #19 on: October 12, 2016, 03:56:15 AM »

Perhaps interest in this thread has expired but I found a video I made a while ago that demonstrates my longplate tuning fixtures. It starts at the 1:50 mark in this video:
https://youtu.be/-7wKNYV7OCE

Scott

BellingersButtonBoxes.com
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal