Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Good material to reduce button travel?  (Read 4860 times)

0 Members and 1 Guest are viewing this topic.

dmcginnis

  • Member
  • *
  • Offline Offline
  • Posts: 6
Good material to reduce button travel?
« on: June 09, 2015, 10:42:21 PM »

Sorry if this has been covered before - I searched and found a few entries and I think that felt or leather might be a good material to place under my old Hohner keyboard to reduce button travel and not let them sink into the wood holes so much.  What are your suggestions?

Thanks,
Dave
Logged

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Good material to reduce button travel?
« Reply #1 on: June 09, 2015, 11:07:52 PM »

Try cork sheet. I got a roll from a model railway supplier, can't remember which one sorry.
Logged

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Good material to reduce button travel?
« Reply #2 on: June 10, 2015, 12:29:17 AM »

I ended up using balsa wood as it was the easiest thing I could think of. Surprisingly works quite well, as it's pretty soft and you can set the keys by pushing them down into it. If I was doing it again I'd probably get a harder wood though and file the grooves myself.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Good material to reduce button travel?
« Reply #3 on: June 10, 2015, 08:09:39 AM »

I used leather on mine, because it was available and it's hard-wearing.
Of the other suggestions made,
I'd expect cork sheet and balsa to work well, and I'd expect felt to be too spongy and also to wear out after a lot of playing.
I tried doing this once with a rubbery self-adhesive door sealing strip, and while it's beautifully quiet, the spongy feel just isn't right. It's surprising how hard the material needs to be.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Good material to reduce button travel?
« Reply #4 on: June 10, 2015, 08:39:20 AM »

It all depends where you propose putting the material.  You can stuff a layer if soft material (leather, felt, foam etc) into the keyboard housing so it sits directly under the buttons.  This can work but there is a limit to the thickness you can use before it becomes impossible to get the keyboard back on. 
A better method is to place a strip of soft wood under the levers and near the outer edge of the treble casing.  I have some photos of this somewhere.  Will find the link and add it here.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Good material to reduce button travel?
« Reply #5 on: June 10, 2015, 07:03:01 PM »

I used two lengths of 1/4" dowel under the levers of my Pokerwork, one right up against the soundboard, and the other close up against it.  I thought that this position, close to the pivot, might cause undue wear on the bearing surfaces, but after ten years' hard work being played most weekends in a ceilidh band, the keys are still working smoothly with no play in the movement.  I've never had to adjust or re-fix the dowels, although they're just a push fit.  It's worth saying that I had to remove the (plastic) keyboard to do the work.  Not a big deal.

The 1/4" dowel closest to the soundboard is just the right height for the levers of the inside row (at least on my Pokerwork it is).  The buttons press down to just slightly proud of the keyboard surface.  This allows sufficient pallet clearance for full volume.

As the travel of the outer row levers needs to be a bit longer, I had to lower the outer dowel a bit by shaving a flat on one side of it.  I then had to cut eleven little rebates across the inner row dowel to allow the outer row levers to travel to the necessary limit.

This work, undertaken in about half an hour with the aid of nothing more sophisticated than a screwdriver and a penknife, did half the job of transforming a hard-to-play hack into a treasured racer.  The other half of the job was softening the treble springs to put a very light weight on the keys. 

It's a great shame that Hohner have always spoiled the Pokerwork's (and the Ericas, Black Dots etc) excellent ship for want of this ha'porth of tar. 
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Good material to reduce button travel?
« Reply #6 on: June 10, 2015, 07:50:20 PM »

I used a cut up cornflakes packet.
Logged
  _       _    _      _ 

Bobtheboat

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
  • 'On the cut' near Lichfield, UK
Re: Good material to reduce button travel?
« Reply #7 on: June 10, 2015, 08:08:05 PM »

How about John Cages 4'33'' ? (Sorry Dave)  >:E Bob
Logged
'Rowbotham Erika Extraordinaire' (12 bass + stop G/C/acc), Hohner Liliput Bb-Eb. Castagnari Rik G/C/acc

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Good material to reduce button travel?
« Reply #8 on: June 10, 2015, 08:57:11 PM »

I used 4 mm thick felt for my single row. There is no choice where to limit the travel, I needed something soft to push through a button hole to get it under the buttons. It works fine until now.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Good material to reduce button travel?
« Reply #9 on: June 10, 2015, 09:06:22 PM »

I would have thought piano felt would be an ideal material, nice and firm.


John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Good material to reduce button travel?
« Reply #10 on: June 14, 2015, 02:38:15 PM »

I used a piece of felt, the kind used on the bottom of furniture ( fairly hard with a sticky side) it comes in circles or square shapes, I use square and cut into strips.
I put it under the buttons which I could do because I have removeable front panel. It works great and was just the right thickness. here's a picture of my keyboard.

http://forum.melodeon.net/index.php?action=dlattach;topic=16508.0;attach=16052;image

I asked the same question in my ( refurbishing a 1040 thread ) but never got a reponse. I thought maybe it was a trade secret ;) but I guess it's use what ever you got kicking around.

I even tried the wood strip behind the levers before I heard anyone suggest it.
it worked but it felt a little hard when it bottomed out. I used pine but balsa would be better.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Good material to reduce button travel?
« Reply #11 on: June 15, 2015, 12:41:59 AM »

I just don't put my fingers too far down on the buttons so that they go in a hole  >:E
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Good material to reduce button travel?
« Reply #12 on: June 15, 2015, 09:07:04 AM »

.   

    Believe that Idi Amin fella played a Hohner

     Actually, on second thoughts … it was a gorilla :|glug
Logged
  _       _    _      _ 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Good material to reduce button travel?
« Reply #13 on: June 15, 2015, 10:01:37 AM »

I just don't put my fingers too far down on the buttons so that they go in a hole  >:E

Exactly!

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Good material to reduce button travel?
« Reply #14 on: June 15, 2015, 12:34:05 PM »

Idi Amin played a gorilla ?

Why are Melnet facts always so much more interesting than Wikipaedia  ;)

(any spares in the box yet Hat Monitor C-B?)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Good material to reduce button travel?
« Reply #15 on: June 15, 2015, 10:20:31 PM »

nah! the gorilla's fingers wouldn't go down the holes :Ph
Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Good material to reduce button travel?
« Reply #16 on: June 16, 2015, 12:57:48 AM »

Thought I understood that for a moment there Mr R  ;)

Closer to the OP question, we have a nearby factory which produces high class, high impact fitted flightcases for amongst uses, instruments both musical and scientific and Formula 1 toolkits. these are lined with a high density neoprene foam which comes in sheets from about 2" (50.8mm) downwards. These are stuck together to achieve the required thickness and then pockets shaped to fit the item to be conveyed by CNC routing. I visited one lunchtime to enquire the price of a square metre (10.76391 sqr ft) of the two inch stuff  :o :o after they had picked me up and administered smelling salts they recognised the likelihood of the sale of an 8 x 4 sheet had just evaporated - however since I had taken the precaution of a lunchtime assault and nobody in authority was in evidence, I was invited to help myself to some of the quite substantial offcuts in their waste bin for a couple of quid in their biscuit fund - needless to say I departed with a variety of sizes and shapes, most of which have since been put to use holding various workshop tools, there remains a chunk of about 3/8" thickness which is destined for the Pokerwork, using Theo's location for the 'castellated' wooden stops I suspect this may work as well and while not providing an end stop for button / lever motion it is pretty resilient and the force needed to compress it increases the more it is compressed - will report back in due course as it might be a remedy requiring less skill to fit and might also improve the damping of some of the rattling which may be amplified by the levers.

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Good material to reduce button travel?
« Reply #17 on: June 16, 2015, 07:04:38 AM »

I have used three different substances as a substrate to limit key travel. I used high density felt under the metal bass spoons on several one row melodeons of various makes, and under treble keys as well. I once used segments of a slightly flexible, but firm ruler under a treble keyboard. I have also used pieces of a waterproof foam designed for use as a non-skid surface on kite surfing boards. All three have been satisfactory.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal